arm64: dts: qcom: msm8916-acer-a1-724: Add sound and modem

Commit Message

Raymond Hackley June 9, 2024, 10:02 a.m. UTC

Enable sound and modem for Acer Iconia Talk S A1-724.
The setup is similar to most MSM8916 devices, i.e.:

- QDSP6 audio
- Earpiece/headphones/microphones via digital/analog codec in
  MSM8916/PM8916
- WWAN Internet via BAM-DMUX

Signed-off-by: Raymond Hackley <[e-mail]>
---
 .../boot/dts/qcom/msm8916-acer-a1-724.dts     | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Bjorn Andersson June 14, 2024, 10:48 p.m. UTC | #1

On Sun, 09 Jun 2024 10:02:45 +0000, Raymond Hackley wrote:
> Enable sound and modem for Acer Iconia Talk S A1-724.
> The setup is similar to most MSM8916 devices, i.e.:
> 
> - QDSP6 audio
> - Earpiece/headphones/microphones via digital/analog codec in
>   MSM8916/PM8916
> - WWAN Internet via BAM-DMUX
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: msm8916-acer-a1-724: Add sound and modem
      commit: f55a758fd355c1b5ed7c73434a99ae07d5741226

Best regards,

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index b32c7a97394d..b4ce14a79370 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -3,6 +3,7 @@ 
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -135,6 +136,17 @@  &blsp_uart2 {
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x4500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <150 237 450 500 590>;
+	qcom,mbhc-vthreshold-high = <150 237 450 500 590>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -170,6 +182,20 @@  &sdhc_2 {
 	status = "okay";
 };
 
+&sound {
+	model = "acer-a1-724";
+	audio-routing =
+		"DMIC1", "MIC BIAS External1",
+		"DMIC1", "Digital Mic1",
+		"AMIC2", "MIC BIAS Internal2",
+		"DMIC2", "MIC BIAS External1",
+		"DMIC2", "Digital Mic2";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &pri_mi2s_mclk_default &cdc_dmic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &pri_mi2s_mclk_sleep &cdc_dmic_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &usb {
 	extcon = <&usb_id>, <&usb_id>;
 	status = "okay";