From patchwork Wed Jun 19 18:32:53 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Golaszewski X-Patchwork-Id: 13704406 Received: from mail-wr1-f43.google.com (mail-wr1-f43.google.com [209.85.221.43]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B5531155C8E for ; Wed, 19 Jun 2024 18:33:15 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.43 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718821999; cv=none; b=BpPPQg9+UBYR1FHUwRmLokr67ErfaYdDyYZezCwEfoIGydMj2Im7+gjINeZVuAH9lHFfoVA+GKgXm1ycEy1wUnJ10iL+WMm3UPi/EPnJr8vifuiZ8leygyqOlKiWpuDpWlexmAaUnPGjx1/3hmEZVumqqIMp5ZhLiv9udzbftXI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1718821999; c=relaxed/simple; bh=FZ77DKJQLPlRB8mq+NiU18f5u05yUQmArgFqy62bcoA=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=bAmXkToI82Sj2CFMtg8DXJtySuceicOJS3gMBqq6REj2kuIXVoAo2oTon2F8tOdRhc9i2GHjPcAjF8VqqFOOoXkt9tDNplDWYvZ4dz1rMuNYRMe9ptakL6GONzn+lPB15A0lqoazbVWioW12e4Cn4g9ePNeAAYg4xd62Oz9jhdM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=bgdev.pl; spf=none smtp.mailfrom=bgdev.pl; dkim=pass (2048-bit key) header.d=bgdev-pl.20230601.gappssmtp.com header.i=@bgdev-pl.20230601.gappssmtp.com header.b=OPTzWKX2; arc=none smtp.client-ip=209.85.221.43 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=bgdev.pl Authentication-Results: smtp.subspace.kernel.org; spf=none smtp.mailfrom=bgdev.pl Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bgdev-pl.20230601.gappssmtp.com header.i=@bgdev-pl.20230601.gappssmtp.com header.b="OPTzWKX2" Received: by mail-wr1-f43.google.com with SMTP id ffacd0b85a97d-361b376236fso51239f8f.3 for ; Wed, 19 Jun 2024 11:33:15 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20230601.gappssmtp.com; s=20230601; t=1718821994; x=1719426794; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=V2GHqs74mJ5xGiEUvIO8OhVobQ7cQuM93CETCGeNoIE=; b=OPTzWKX29sSNYPjgQ+BFKZ36oTIBp/fBZuemauGlxYsCtEQYkV2Y0HdUABFYZTT0bv aooO4zw6NJ9EB7PC6kmd25KWozv/4IKvao39R0bWmyQcAFBHM/ctNX6WBEbFX8eYLAL/ tddwv8gmC0TDxTex/IH5zt3/f27+WdB8aEQM9lKmffYoA2S7tIcuykKaTYYnes0VL1SU rcDhgPNgOuInpD7HPJcOl5JWc0dBkeFqDKlhYk0AeYjv8LkZz0DHRcBwyVYeJNspdjPL /LtS2h87GGvnXBlY6vNl8XE1E0aOdNf96i5/qZDSwgO17LbLHXqYJPBfn11x7iC6On1R RJ4A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1718821994; x=1719426794; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=V2GHqs74mJ5xGiEUvIO8OhVobQ7cQuM93CETCGeNoIE=; b=w/FbhtWvLZ0sbuso/+Dwbqojeh1VvxGJwh+FYM0y18qc+EmMyWN4WaDUKdg3DZtKx7 j32SRfVjIzDLR+myYA9aD+UC9ssjxLcyJWQMvl2DZO/QW5DEc0aIUBsV4rp5x/9UQAL7 J92/MtX/bfyExAuYsSTvbOcUyjFCJIlcSyc53X9dMioYB2jWlXrZitRTZjiJvW2rDpvg iuAXM8/1UMDUb7F4Nujd9M/n1X3pBPh9udeUUc5gQValEAii/AO9gNbr/fGPYV6ssKgP T0J9LXPhaoZtTAxMDpnKZUc2x3l6IneGN1DaQv+OtBlAxnr9CLe0AoQuptbw8d+s3z1+ wq7w== X-Gm-Message-State: AOJu0YwhPypGz1eQ1LFhbSVP40Jc11tGH6lJOWVBuuOaZOYbCpZwOvCu 0/zYwpJefjbYsQ4WqgEFf0CQ3U2y5gFK1oD6SrIFz0m2xX0wPnYjazFS6LhI7FTtighOCDKVxuM q X-Google-Smtp-Source: AGHT+IE/1Ws/vvNuwnjmxI2v+e4fG7PcWw0bDOZ6r+L5P6FxIbV17+ZFfmsSJ8pbpexhO98kFDZRgQ== X-Received: by 2002:a05:6000:235:b0:362:40cd:1bc with SMTP id ffacd0b85a97d-363178982camr2394620f8f.24.1718821993933; Wed, 19 Jun 2024 11:33:13 -0700 (PDT) Received: from brgl-uxlite.home ([2a01:cb1d:dc:7e00:991f:deb8:4c5d:d73d]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-36262f77ad9sm4603238f8f.109.2024.06.19.11.33.12 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 19 Jun 2024 11:33:13 -0700 (PDT) From: Bartosz Golaszewski To: Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH 1/2] arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi Date: Wed, 19 Jun 2024 20:32:53 +0200 Message-ID: <20240619183255.34107-2-brgl@bgdev.pl> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240619183255.34107-1-brgl@bgdev.pl> References: <20240619183255.34107-1-brgl@bgdev.pl> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 From: Bartosz Golaszewski In order to support multiple revisions of the sa8775p-ride board, create a .dtsi containing the common parts and split out the ethernet bits into the actual board file as they will change in revision 3. Signed-off-by: Bartosz Golaszewski --- arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 841 +-------------------- arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 817 ++++++++++++++++++++ 2 files changed, 839 insertions(+), 819 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 26ad05bd3b3f..af9f232ba3d5 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,835 +5,38 @@ /dts-v1/; -#include -#include - -#include "sa8775p.dtsi" -#include "sa8775p-pmics.dtsi" - -/ { - model = "Qualcomm SA8775P Ride"; - compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; - - aliases { - ethernet0 = ðernet0; - ethernet1 = ðernet1; - i2c11 = &i2c11; - i2c18 = &i2c18; - serial0 = &uart10; - serial1 = &uart12; - serial2 = &uart17; - spi16 = &spi16; - ufshc1 = &ufs_mem_hc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_s4a: smps4 { - regulator-name = "vreg_s4a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1816000>; - regulator-initial-mode = ; - }; - - vreg_s5a: smps5 { - regulator-name = "vreg_s5a"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1996000>; - regulator-initial-mode = ; - }; - - vreg_s9a: smps9 { - regulator-name = "vreg_s9a"; - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - regulator-initial-mode = ; - }; - - vreg_l4a: ldo4 { - regulator-name = "vreg_l4a"; - regulator-min-microvolt = <788000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l6a: ldo6 { - regulator-name = "vreg_l6a"; - regulator-min-microvolt = <870000>; - regulator-max-microvolt = <970000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <950000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l8a: ldo8 { - regulator-name = "vreg_l8a"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l9a: ldo9 { - regulator-name = "vreg_l9a"; - regulator-min-microvolt = <2970000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - }; - - regulators-1 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <1140000>; - regulator-max-microvolt = <1260000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l3c: ldo3 { - regulator-name = "vreg_l3c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - /* - * FIXME: This should have regulator-allow-set-load but - * we're getting an over-current fault from the PMIC - * when switching to LPM. - */ - }; - - vreg_l5c: ldo5 { - regulator-name = "vreg_l5c"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l6c: ldo6 { - regulator-name = "vreg_l6c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l8c: ldo8 { - regulator-name = "vreg_l8c"; - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l9c: ldo9 { - regulator-name = "vreg_l9c"; - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2700000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - }; - - regulators-2 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "e"; - - vreg_s4e: smps4 { - regulator-name = "vreg_s4e"; - regulator-min-microvolt = <970000>; - regulator-max-microvolt = <1520000>; - regulator-initial-mode = ; - }; - - vreg_s7e: smps7 { - regulator-name = "vreg_s7e"; - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - regulator-initial-mode = ; - }; - - vreg_s9e: smps9 { - regulator-name = "vreg_s9e"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <570000>; - regulator-initial-mode = ; - }; - - vreg_l6e: ldo6 { - regulator-name = "vreg_l6e"; - regulator-min-microvolt = <1280000>; - regulator-max-microvolt = <1450000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - - vreg_l8e: ldo8 { - regulator-name = "vreg_l8e"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1950000>; - regulator-initial-mode = ; - regulator-allow-set-load; - regulator-allowed-modes = ; - }; - }; -}; +#include "sa8775p-ride.dtsi" ðernet0 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy0>; - - pinctrl-0 = <ðernet0_default>; - pinctrl-names = "default"; - - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - snps,ps-speed = <1000>; - - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - sgmii_phy0: phy@8 { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0x8>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - - sgmii_phy1: phy@a { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0xa>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; }; ðernet1 { phy-mode = "sgmii"; - phy-handle = <&sgmii_phy1>; +}; - snps,mtl-rx-config = <&mtl_rx_setup1>; - snps,mtl-tx-config = <&mtl_tx_setup1>; - snps,ps-speed = <1000>; +&mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; - status = "okay"; - - mtl_rx_setup1: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; - mtl_tx_setup1: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; + sgmii_phy1: phy@a { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0xa>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; }; }; - -&i2c11 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c11_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c18 { - clock-frequency = <400000>; - pinctrl-0 = <&qup_i2c18_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pmm8654au_0_gpios { - gpio-line-names = "DS_EN", - "POFF_COMPLETE", - "UFS0_VER_ID", - "FAST_POFF", - "DBU1_PON_DONE", - "AOSS_SLEEP", - "CAM_DES0_EN", - "CAM_DES1_EN", - "CAM_DES2_EN", - "CAM_DES3_EN", - "UEFI", - "ANALOG_PON_OPT"; -}; - -&pmm8654au_0_pon_resin { - linux,code = ; - status = "okay"; -}; - -&pmm8654au_1_gpios { - gpio-line-names = "PMIC_C_ID0", - "PMIC_C_ID1", - "UFS1_VER_ID", - "IPA_PWR", - "", - "WLAN_DBU4_EN", - "WLAN_EN", - "BT_EN", - "USB2_PWR_EN", - "USB2_FAULT"; - - usb2_en_state: usb2-en-state { - pins = "gpio9"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_2_gpios { - gpio-line-names = "PMIC_E_ID0", - "PMIC_E_ID1", - "USB0_PWR_EN", - "USB0_FAULT", - "SENSOR_IRQ_1", - "SENSOR_IRQ_2", - "SENSOR_RST", - "SGMIIO0_RST", - "SGMIIO1_RST", - "USB1_PWR_ENABLE", - "USB1_FAULT", - "VMON_SPX8"; - - usb0_en_state: usb0-en-state { - pins = "gpio3"; - function = "normal"; - output-high; - power-source = <0>; - }; - - usb1_en_state: usb1-en-state { - pins = "gpio10"; - function = "normal"; - output-high; - power-source = <0>; - }; -}; - -&pmm8654au_3_gpios { - gpio-line-names = "PMIC_G_ID0", - "PMIC_G_ID1", - "GNSS_RST", - "GNSS_EN", - "GNSS_BOOT_MODE"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&qupv3_id_2 { - status = "okay"; -}; - -&serdes0 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&serdes1 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&sleep_clk { - clock-frequency = <32764>; -}; - -&spi16 { - pinctrl-0 = <&qup_spi16_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - ethernet0_default: ethernet0-default-state { - ethernet0_mdc: ethernet0-mdc-pins { - pins = "gpio8"; - function = "emac0_mdc"; - drive-strength = <16>; - bias-pull-up; - }; - - ethernet0_mdio: ethernet0-mdio-pins { - pins = "gpio9"; - function = "emac0_mdio"; - drive-strength = <16>; - bias-pull-up; - }; - }; - - qup_uart10_default: qup-uart10-state { - pins = "gpio46", "gpio47"; - function = "qup1_se3"; - }; - - qup_spi16_default: qup-spi16-state { - pins = "gpio86", "gpio87", "gpio88", "gpio89"; - function = "qup2_se2"; - drive-strength = <6>; - bias-disable; - }; - - qup_i2c11_default: qup-i2c11-state { - pins = "gpio48", "gpio49"; - function = "qup1_se4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c18_default: qup-i2c18-state { - pins = "gpio95", "gpio96"; - function = "qup2_se4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_uart12_default: qup-uart12-state { - qup_uart12_cts: qup-uart12-cts-pins { - pins = "gpio52"; - function = "qup1_se5"; - bias-disable; - }; - - qup_uart12_rts: qup-uart12-rts-pins { - pins = "gpio53"; - function = "qup1_se5"; - bias-pull-down; - }; - - qup_uart12_tx: qup-uart12-tx-pins { - pins = "gpio54"; - function = "qup1_se5"; - bias-pull-up; - }; - - qup_uart12_rx: qup-uart12-rx-pins { - pins = "gpio55"; - function = "qup1_se5"; - bias-pull-down; - }; - }; - - qup_uart17_default: qup-uart17-state { - qup_uart17_cts: qup-uart17-cts-pins { - pins = "gpio91"; - function = "qup2_se3"; - bias-disable; - }; - - qup_uart17_rts: qup0-uart17-rts-pins { - pins = "gpio92"; - function = "qup2_se3"; - bias-pull-down; - }; - - qup_uart17_tx: qup0-uart17-tx-pins { - pins = "gpio93"; - function = "qup2_se3"; - bias-pull-up; - }; - - qup_uart17_rx: qup0-uart17-rx-pins { - pins = "gpio94"; - function = "qup2_se3"; - bias-pull-down; - }; - }; - - pcie0_default_state: pcie0-default-state { - perst-pins { - pins = "gpio2"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio1"; - function = "pcie0_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio0"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie1_default_state: pcie1-default-state { - perst-pins { - pins = "gpio4"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio3"; - function = "pcie1_clkreq"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio5"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&pcie0 { - perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; - - status = "okay"; -}; - -&pcie1 { - perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; - - status = "okay"; -}; - -&pcie0_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&pcie1_phy { - vdda-phy-supply = <&vreg_l5a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&uart10 { - compatible = "qcom,geni-debug-uart"; - pinctrl-0 = <&qup_uart10_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart12 { - pinctrl-0 = <&qup_uart12_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart17 { - pinctrl-0 = <&qup_uart17_default>; - pinctrl-names = "default"; - status = "okay"; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; - vcc-supply = <&vreg_l8a>; - vcc-max-microamp = <1100000>; - vccq-supply = <&vreg_l4c>; - vccq-max-microamp = <1200000>; - - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l4a>; - vdda-pll-supply = <&vreg_l1c>; - - status = "okay"; -}; - -&usb_0 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_en_state>; - - status = "okay"; -}; - -&usb_0_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_0_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_0_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_en_state>; - - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&vreg_l1c>; - vdda-pll-supply = <&vreg_l7a>; - - status = "okay"; -}; - -&usb_2 { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_en_state>; - - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - vdda-pll-supply = <&vreg_l7a>; - vdda18-supply = <&vreg_l6c>; - vdda33-supply = <&vreg_l9a>; - - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <38400000>; -}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi new file mode 100644 index 000000000000..9fa023ed2340 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi @@ -0,0 +1,817 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include +#include + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + model = "Qualcomm SA8775P Ride"; + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; + + aliases { + ethernet0 = ðernet0; + ethernet1 = ðernet1; + i2c11 = &i2c11; + i2c18 = &i2c18; + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + spi16 = &spi16; + ufshc1 = &ufs_mem_hc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = ; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = ; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = ; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = ; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = ; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = ; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; +}; + +ðernet0 { + phy-handle = <&sgmii_phy0>; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,ps-speed = <1000>; + + status = "okay"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + phy-handle = <&sgmii_phy1>; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,ps-speed = <1000>; + + status = "okay"; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c11_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_0_pon_resin { + linux,code = ; + status = "okay"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; + + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; + + usb0_en_state: usb0-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb1_en_state: usb1-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&serdes1 { + phy-supply = <&vreg_l5a>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio3"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&pcie0 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_state>; + + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_state>; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +};