| Message ID | 20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-v1-1-de99ee030b27@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply | expand |
On 29.06.2024 8:29 AM, Abel Vesa wrote: > According to the power grid documentation, the 0.8v HS PHY shared > regulator is actually LDO3 from PM8550ve id J. Fix both CRD and QCP > boards. > > Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
On Sat, 29 Jun 2024 09:29:43 +0300, Abel Vesa wrote: > According to the power grid documentation, the 0.8v HS PHY shared > regulator is actually LDO3 from PM8550ve id J. Fix both CRD and QCP > boards. > > Applied, thanks! [1/1] arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply commit: 9c99c33a904c86d95ecf4e2690de6a826b88671c Best regards,
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index ce80119d798d..6152bcd0bc1f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -990,7 +990,7 @@ &uart21 { }; &usb_1_ss0_hsphy { - vdd-supply = <&vreg_l2e_0p8>; + vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -1022,7 +1022,7 @@ &usb_1_ss0_qmpphy_out { }; &usb_1_ss1_hsphy { - vdd-supply = <&vreg_l2e_0p8>; + vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -1054,7 +1054,7 @@ &usb_1_ss1_qmpphy_out { }; &usb_1_ss2_hsphy { - vdd-supply = <&vreg_l2e_0p8>; + vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index b045b7bac9e0..c1ebcdbc3cf1 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -687,7 +687,7 @@ &uart21 { }; &usb_1_ss0_hsphy { - vdd-supply = <&vreg_l2e_0p8>; + vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -719,7 +719,7 @@ &usb_1_ss0_qmpphy_out { }; &usb_1_ss1_hsphy { - vdd-supply = <&vreg_l2e_0p8>; + vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -751,7 +751,7 @@ &usb_1_ss1_qmpphy_out { }; &usb_1_ss2_hsphy { - vdd-supply = <&vreg_l2e_0p8>; + vdd-supply = <&vreg_l3j_0p8>; vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>;
According to the power grid documentation, the 0.8v HS PHY shared regulator is actually LDO3 from PM8550ve id J. Fix both CRD and QCP boards. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 6 +++--- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) --- base-commit: 642a16ca7994a50d7de85715996a8ce171a5bdfb change-id: 20240629-x1e80100-dts-fix-hsphy-0-8v-supplies-132a48ed3681 Best regards,