| Message ID | 20240723083300.35605-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | ASoC: dt-bindings: qcom,apq8016-sbc-sndcard: move to separate binding | expand |
On Tue, 23 Jul 2024 10:33:00 +0200, Krzysztof Kozlowski wrote: > The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from > others: they have additional IO muxing address space and pin control. > Move them to separate schema, so the original qcom,sm8250.yaml will be > easier to manage. New schema is going to grow for other platforms > having more of IO muxing address spaces. > > Cc: Adam Skladowski <a39.skl@gmail.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../sound/qcom,apq8016-sbc-sndcard.yaml | 205 ++++++++++++++++++ > .../bindings/sound/qcom,sm8250.yaml | 137 ------------ > 2 files changed, 205 insertions(+), 137 deletions(-) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml > Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
On Tue, Jul 23, 2024 at 10:33:00AM +0200, Krzysztof Kozlowski wrote: >The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from >others: they have additional IO muxing address space and pin control. >Move them to separate schema, so the original qcom,sm8250.yaml will be >easier to manage. New schema is going to grow for other platforms >having more of IO muxing address spaces. > >Cc: Adam Skladowski <a39.skl@gmail.com> >Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >--- > .../sound/qcom,apq8016-sbc-sndcard.yaml | 205 ++++++++++++++++++ > .../bindings/sound/qcom,sm8250.yaml | 137 ------------ > 2 files changed, 205 insertions(+), 137 deletions(-) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml > >diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml >new file mode 100644 >index 000000000000..6ad451549036 > [...] >diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml >index c9076dcd44c1..1d3acdc0c733 100644 >--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml >+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml >@@ -27,9 +27,7 @@ properties: > - qcom,sm8650-sndcard > - const: qcom,sm8450-sndcard > - enum: >- - qcom,apq8016-sbc-sndcard > - qcom,apq8096-sndcard >- - qcom,msm8916-qdsp6-sndcard > - qcom,qcm6490-idp-sndcard > - qcom,qcs6490-rb3gen2-sndcard > - qcom,qrb5165-rb5-sndcard >@@ -58,18 +56,6 @@ properties: > $ref: /schemas/types.yaml#/definitions/string > description: User visible long sound card name > >- pin-switches: >- description: List of widget names for which pin switches should be created. >- $ref: /schemas/types.yaml#/definitions/string-array >- >- widgets: >- description: User specified audio sound widgets. >- $ref: /schemas/types.yaml#/definitions/non-unique-string-array >- These two properties are also valid and supported on all newer platforms, please keep them here! There are certain use cases where these are needed independent of the platform, e.g. to control an analog switch or mux connected to speaker or headphone outputs. I agree that it is cleaner to move the IO muxing to a new schema though. Perhaps we could define something like a shared qcom,sndcard-common.yaml schema to avoid duplication for these generic properties? In the Linux driver, these are handled for all platforms in sound/soc/qcom/common.c. Thanks, Stephan
On 27/07/2024 22:23, Stephan Gerhold wrote: > On Tue, Jul 23, 2024 at 10:33:00AM +0200, Krzysztof Kozlowski wrote: >> The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from >> others: they have additional IO muxing address space and pin control. >> Move them to separate schema, so the original qcom,sm8250.yaml will be >> easier to manage. New schema is going to grow for other platforms >> having more of IO muxing address spaces. >> >> Cc: Adam Skladowski <a39.skl@gmail.com> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> .../sound/qcom,apq8016-sbc-sndcard.yaml | 205 ++++++++++++++++++ >> .../bindings/sound/qcom,sm8250.yaml | 137 ------------ >> 2 files changed, 205 insertions(+), 137 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml >> >> diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml >> new file mode 100644 >> index 000000000000..6ad451549036 >> [...] >> diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml >> index c9076dcd44c1..1d3acdc0c733 100644 >> --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml >> +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml >> @@ -27,9 +27,7 @@ properties: >> - qcom,sm8650-sndcard >> - const: qcom,sm8450-sndcard >> - enum: >> - - qcom,apq8016-sbc-sndcard >> - qcom,apq8096-sndcard >> - - qcom,msm8916-qdsp6-sndcard >> - qcom,qcm6490-idp-sndcard >> - qcom,qcs6490-rb3gen2-sndcard >> - qcom,qrb5165-rb5-sndcard >> @@ -58,18 +56,6 @@ properties: >> $ref: /schemas/types.yaml#/definitions/string >> description: User visible long sound card name >> >> - pin-switches: >> - description: List of widget names for which pin switches should be created. >> - $ref: /schemas/types.yaml#/definitions/string-array >> - >> - widgets: >> - description: User specified audio sound widgets. >> - $ref: /schemas/types.yaml#/definitions/non-unique-string-array >> - > > These two properties are also valid and supported on all newer > platforms, please keep them here! There are certain use cases where > these are needed independent of the platform, e.g. to control an analog > switch or mux connected to speaker or headphone outputs. > > I agree that it is cleaner to move the IO muxing to a new schema though. > Perhaps we could define something like a shared qcom,sndcard-common.yaml > schema to avoid duplication for these generic properties? In the Linux > driver, these are handled for all platforms in sound/soc/qcom/common.c. This was added to the common driver code but it does not mean it is reasonable binding. I don't understand why for example we even accept here aux-devs, instead of putting them into one of DAI links. The pin-switches and widgets could be used, but are they? The only valid argument to keep them is that you added them to common driver code. Best regards, Krzysztof
On Tue, 23 Jul 2024 10:33:00 +0200, Krzysztof Kozlowski wrote: > The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from > others: they have additional IO muxing address space and pin control. > Move them to separate schema, so the original qcom,sm8250.yaml will be > easier to manage. New schema is going to grow for other platforms > having more of IO muxing address spaces. > > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: dt-bindings: qcom,apq8016-sbc-sndcard: move to separate binding commit: 8716bd241fa120aacce5e0136125b7ecc74fe3b2 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Sun, Jul 28, 2024 at 12:30:12PM +0200, Krzysztof Kozlowski wrote: > On 27/07/2024 22:23, Stephan Gerhold wrote: > > On Tue, Jul 23, 2024 at 10:33:00AM +0200, Krzysztof Kozlowski wrote: > >> The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from > >> others: they have additional IO muxing address space and pin control. > >> Move them to separate schema, so the original qcom,sm8250.yaml will be > >> easier to manage. New schema is going to grow for other platforms > >> having more of IO muxing address spaces. > >> > >> Cc: Adam Skladowski <a39.skl@gmail.com> > >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >> --- > >> .../sound/qcom,apq8016-sbc-sndcard.yaml | 205 ++++++++++++++++++ > >> .../bindings/sound/qcom,sm8250.yaml | 137 ------------ > >> 2 files changed, 205 insertions(+), 137 deletions(-) > >> create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml > >> > >> diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml > >> new file mode 100644 > >> index 000000000000..6ad451549036 > >> [...] > >> diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml > >> index c9076dcd44c1..1d3acdc0c733 100644 > >> --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml > >> +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml > >> @@ -27,9 +27,7 @@ properties: > >> - qcom,sm8650-sndcard > >> - const: qcom,sm8450-sndcard > >> - enum: > >> - - qcom,apq8016-sbc-sndcard > >> - qcom,apq8096-sndcard > >> - - qcom,msm8916-qdsp6-sndcard > >> - qcom,qcm6490-idp-sndcard > >> - qcom,qcs6490-rb3gen2-sndcard > >> - qcom,qrb5165-rb5-sndcard > >> @@ -58,18 +56,6 @@ properties: > >> $ref: /schemas/types.yaml#/definitions/string > >> description: User visible long sound card name > >> > >> - pin-switches: > >> - description: List of widget names for which pin switches should be created. > >> - $ref: /schemas/types.yaml#/definitions/string-array > >> - > >> - widgets: > >> - description: User specified audio sound widgets. > >> - $ref: /schemas/types.yaml#/definitions/non-unique-string-array > >> - > > > > These two properties are also valid and supported on all newer > > platforms, please keep them here! There are certain use cases where > > these are needed independent of the platform, e.g. to control an analog > > switch or mux connected to speaker or headphone outputs. > > > > I agree that it is cleaner to move the IO muxing to a new schema though. > > Perhaps we could define something like a shared qcom,sndcard-common.yaml > > schema to avoid duplication for these generic properties? In the Linux > > driver, these are handled for all platforms in sound/soc/qcom/common.c. > > This was added to the common driver code but it does not mean it is > reasonable binding. I don't understand why for example we even accept > here aux-devs, instead of putting them into one of DAI links. > The auxiliary devices (typically analog audio components) are not necessarily related to one particular digital audio interface link. It is typically the case (e.g. an analog speaker amplifier connected in parallel to the headphone output of one of the codecs), but I don't think we can assume that as a general rule. There are often multiple DAI links that go to one codec and then it might be tricky to decide which of the DAI links the aux-dev belongs to. > The pin-switches and widgets could be used, but are they? The only valid > argument to keep them is that you added them to common driver code. These go hand in hand with the aux-devs property. If you have multiple analog audio components connected to a codec output (e.g. an analog speaker amplifier connected to the codec headphone output) then the pin-switches/widgets describe that the output paths (speaker and headphones) should be separately controllable. The alternative for pin-switches and widgets in the DT is to hardcode them in the ASoC board/machine driver with a separate board-specific compatible. Personally, I would prefer to keep the machine driver specific to the SoC instead of having definitions for each and every board. Thanks, Stephan
On Tue, Jul 30, 2024 at 12:30:38PM +0200, Stephan Gerhold wrote: > On Sun, Jul 28, 2024 at 12:30:12PM +0200, Krzysztof Kozlowski wrote: > > This was added to the common driver code but it does not mean it is > > reasonable binding. I don't understand why for example we even accept > > here aux-devs, instead of putting them into one of DAI links. > The auxiliary devices (typically analog audio components) are not > necessarily related to one particular digital audio interface link. It > is typically the case (e.g. an analog speaker amplifier connected in > parallel to the headphone output of one of the codecs), but I don't > think we can assume that as a general rule. There are often multiple DAI > links that go to one codec and then it might be tricky to decide which > of the DAI links the aux-dev belongs to. Right, aux devices may cover more than one DAI link (eg, if there's a CODEC that can do mixing and they're connected to an analog output) or may in rare cases not fit with one at all (there's use cases where you have a sound card that has no DAIs and is all analog bypass). > > The pin-switches and widgets could be used, but are they? The only valid > > argument to keep them is that you added them to common driver code. > These go hand in hand with the aux-devs property. If you have multiple > analog audio components connected to a codec output (e.g. an analog > speaker amplifier connected to the codec headphone output) then the > pin-switches/widgets describe that the output paths (speaker and > headphones) should be separately controllable. Plus the above cases where you don't have a direct mapping with aux devs and DAIs also apply to pin switches since they're in the analog domain.
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml new file mode 100644 index 000000000000..6ad451549036 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,apq8016-sbc-sndcard.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APQ8016 and similar sound cards + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + - Stephan Gerhold <stephan@gerhold.net> + +properties: + compatible: + enum: + - qcom,apq8016-sbc-sndcard + - qcom,msm8916-qdsp6-sndcard + + reg: + items: + - description: Microphone I/O mux register address + - description: Speaker I/O mux register address + + reg-names: + items: + - const: mic-iomux + - const: spkr-iomux + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. Valid names could be power supplies, + MicBias of codec and the jacks on the board. + + aux-devs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + List of phandles pointing to auxiliary devices, such + as amplifiers, to be added to the sound card. + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User visible long sound card name + + pin-switches: + description: List of widget names for which pin switches should be created. + $ref: /schemas/types.yaml#/definitions/string-array + + widgets: + description: User specified audio sound widgets. + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + +patternProperties: + ".*-dai-link$": + description: + Each subnode represents a dai link. Subnodes of each dai links would be + cpu/codec dais. + + type: object + + properties: + link-name: + description: Indicates dai-link name and PCM stream name. + $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 + + cpu: + description: Holds subnode which indicates cpu dai. + type: object + additionalProperties: false + + properties: + sound-dai: + maxItems: 1 + + platform: + description: Holds subnode which indicates platform dai. + type: object + additionalProperties: false + + properties: + sound-dai: + maxItems: 1 + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + + properties: + sound-dai: + minItems: 1 + maxItems: 8 + + required: + - link-name + - cpu + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - model + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,lpass.h> + sound@7702000 { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + model = "DB410c"; + audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + + quaternary-dai-link { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + }; + + - | + #include <dt-bindings/sound/qcom,q6afe.h> + #include <dt-bindings/sound/qcom,q6asm.h> + sound@7702000 { + compatible = "qcom,msm8916-qdsp6-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + model = "msm8916"; + widgets = + "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker"; + audio-routing = + "Speaker", "Speaker Amp OUT", + "Speaker Amp IN", "HPH_R", + "Headphones", "HPH_L", + "Headphones", "HPH_R", + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS Internal3"; + aux-devs = <&speaker_amp>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + primary-dai-link { + link-name = "Primary MI2S"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index c9076dcd44c1..1d3acdc0c733 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -27,9 +27,7 @@ properties: - qcom,sm8650-sndcard - const: qcom,sm8450-sndcard - enum: - - qcom,apq8016-sbc-sndcard - qcom,apq8096-sndcard - - qcom,msm8916-qdsp6-sndcard - qcom,qcm6490-idp-sndcard - qcom,qcs6490-rb3gen2-sndcard - qcom,qrb5165-rb5-sndcard @@ -58,18 +56,6 @@ properties: $ref: /schemas/types.yaml#/definitions/string description: User visible long sound card name - pin-switches: - description: List of widget names for which pin switches should be created. - $ref: /schemas/types.yaml#/definitions/string-array - - widgets: - description: User specified audio sound widgets. - $ref: /schemas/types.yaml#/definitions/non-unique-string-array - - # Only valid for some compatibles (see allOf if below) - reg: true - reg-names: true - patternProperties: ".*-dai-link$": description: @@ -122,34 +108,6 @@ required: - compatible - model -allOf: - - if: - properties: - compatible: - contains: - enum: - - qcom,apq8016-sbc-sndcard - - qcom,msm8916-qdsp6-sndcard - then: - properties: - reg: - items: - - description: Microphone I/O mux register address - - description: Speaker I/O mux register address - reg-names: - items: - - const: mic-iomux - - const: spkr-iomux - required: - - compatible - - model - - reg - - reg-names - else: - properties: - reg: false - reg-names: false - additionalProperties: false examples: @@ -231,98 +189,3 @@ examples: }; }; }; - - - | - #include <dt-bindings/sound/qcom,lpass.h> - sound@7702000 { - compatible = "qcom,apq8016-sbc-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - - model = "DB410c"; - audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - - quaternary-dai-link { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; - - primary-dai-link { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - tertiary-dai-link { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; - }; - - - | - #include <dt-bindings/sound/qcom,q6afe.h> - #include <dt-bindings/sound/qcom,q6asm.h> - sound@7702000 { - compatible = "qcom,msm8916-qdsp6-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - - model = "msm8916"; - widgets = - "Speaker", "Speaker", - "Headphone", "Headphones"; - pin-switches = "Speaker"; - audio-routing = - "Speaker", "Speaker Amp OUT", - "Speaker Amp IN", "HPH_R", - "Headphones", "HPH_L", - "Headphones", "HPH_R", - "AMIC1", "MIC BIAS Internal1", - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS Internal3"; - aux-devs = <&speaker_amp>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cdc_pdm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus>; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - primary-dai-link { - link-name = "Primary MI2S"; - cpu { - sound-dai = <&q6afedai PRIMARY_MI2S_RX>; - }; - platform { - sound-dai = <&q6routing>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - };
The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from others: they have additional IO muxing address space and pin control. Move them to separate schema, so the original qcom,sm8250.yaml will be easier to manage. New schema is going to grow for other platforms having more of IO muxing address spaces. Cc: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../sound/qcom,apq8016-sbc-sndcard.yaml | 205 ++++++++++++++++++ .../bindings/sound/qcom,sm8250.yaml | 137 ------------ 2 files changed, 205 insertions(+), 137 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc-sndcard.yaml