| Message ID | 20240820080439.837666-1-fabio.porcedda@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | bus: mhi: host: pci_generic: Fix the name for the Telit FE990A | expand |
On Tue, Aug 20, 2024 at 10:04:39AM +0200, Fabio Porcedda wrote: > Add a mhi_pci_dev_info struct specific for the Telit FE990A modem in > order to use the correct product name. > > Cc: stable@vger.kernel.org # 6.1+ > Fixes: 0724869ede9c ("bus: mhi: host: pci_generic: add support for Telit FE990 modem") > Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c > index 14a11880bcea..fb701c67f763 100644 > --- a/drivers/bus/mhi/host/pci_generic.c > +++ b/drivers/bus/mhi/host/pci_generic.c > @@ -680,6 +680,15 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = { > .mru_default = 32768, > }; > > +static const struct mhi_pci_dev_info mhi_telit_fe990a_info = { > + .name = "telit-fe990a", > + .config = &modem_telit_fn990_config, > + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, > + .dma_data_width = 32, > + .sideband_wake = false, > + .mru_default = 32768, > +}; > + > /* Keep the list sorted based on the PID. New VID should be added as the last entry */ > static const struct pci_device_id mhi_pci_id_table[] = { > { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), > @@ -697,9 +706,9 @@ static const struct pci_device_id mhi_pci_id_table[] = { > /* Telit FN990 */ > { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), > .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, > - /* Telit FE990 */ > + /* Telit FE990A */ > { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2015), > - .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, > + .driver_data = (kernel_ulong_t) &mhi_telit_fe990a_info }, > { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), > .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, > { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0309), > -- > 2.46.0 >
On Tue, Aug 20, 2024 at 10:04:39AM +0200, Fabio Porcedda wrote: > Add a mhi_pci_dev_info struct specific for the Telit FE990A modem in > order to use the correct product name. > > Cc: stable@vger.kernel.org # 6.1+ > Fixes: 0724869ede9c ("bus: mhi: host: pci_generic: add support for Telit FE990 modem") > Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Applied to mhi-next! - Mani > --- > drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c > index 14a11880bcea..fb701c67f763 100644 > --- a/drivers/bus/mhi/host/pci_generic.c > +++ b/drivers/bus/mhi/host/pci_generic.c > @@ -680,6 +680,15 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = { > .mru_default = 32768, > }; > > +static const struct mhi_pci_dev_info mhi_telit_fe990a_info = { > + .name = "telit-fe990a", > + .config = &modem_telit_fn990_config, > + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, > + .dma_data_width = 32, > + .sideband_wake = false, > + .mru_default = 32768, > +}; > + > /* Keep the list sorted based on the PID. New VID should be added as the last entry */ > static const struct pci_device_id mhi_pci_id_table[] = { > { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), > @@ -697,9 +706,9 @@ static const struct pci_device_id mhi_pci_id_table[] = { > /* Telit FN990 */ > { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), > .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, > - /* Telit FE990 */ > + /* Telit FE990A */ > { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2015), > - .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, > + .driver_data = (kernel_ulong_t) &mhi_telit_fe990a_info }, > { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), > .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, > { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0309), > -- > 2.46.0 >
diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c index 14a11880bcea..fb701c67f763 100644 --- a/drivers/bus/mhi/host/pci_generic.c +++ b/drivers/bus/mhi/host/pci_generic.c @@ -680,6 +680,15 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = { .mru_default = 32768, }; +static const struct mhi_pci_dev_info mhi_telit_fe990a_info = { + .name = "telit-fe990a", + .config = &modem_telit_fn990_config, + .bar_num = MHI_PCI_DEFAULT_BAR_NUM, + .dma_data_width = 32, + .sideband_wake = false, + .mru_default = 32768, +}; + /* Keep the list sorted based on the PID. New VID should be added as the last entry */ static const struct pci_device_id mhi_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304), @@ -697,9 +706,9 @@ static const struct pci_device_id mhi_pci_id_table[] = { /* Telit FN990 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, - /* Telit FE990 */ + /* Telit FE990A */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2015), - .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, + .driver_data = (kernel_ulong_t) &mhi_telit_fe990a_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0309),
Add a mhi_pci_dev_info struct specific for the Telit FE990A modem in order to use the correct product name. Cc: stable@vger.kernel.org # 6.1+ Fixes: 0724869ede9c ("bus: mhi: host: pci_generic: add support for Telit FE990 modem") Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> --- drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)