diff mbox series

[v2,4/5] arm64: dts: qcom: x1e80100: Add UART2

Message ID 20240826-topic-sl7-v2-4-c32ebae78789@quicinc.com (mailing list archive)
State Accepted
Commit ecbdce2041ee09cb3a046fd2b7d000fa5e333773
Headers show
Series X1E Surface Laptop 7 support | expand

Commit Message

Konrad Dybcio Aug. 26, 2024, 2:37 p.m. UTC 
From: Konrad Dybcio <quic_kdybcio@quicinc.com>

GENI SE2 within QUP0 is used as UART on some devices, describe it.
While at it, rewrite the adjacent UART21 pins node to make it more
easily modifiable.

Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 70 +++++++++++++++++++++++++++++++---
 1 file changed, 65 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index 6abff8258674..f9e0b1dda4c0 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2143,6 +2143,28 @@  &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
 				status = "disabled";
 			};
 
+			uart2: serial@b88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart2_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
 			spi2: spi@b88000 {
 				compatible = "qcom,geni-spi";
 				reg = <0 0x00b88000 0 0x4000>;
@@ -5559,12 +5581,50 @@  qup_spi23_data_clk: qup-spi23-data-clk-state {
 				bias-disable;
 			};
 
+			qup_uart2_default: qup-uart2-default-state {
+				cts-pins {
+					pins = "gpio8";
+					function = "qup0_se2";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rts-pins {
+					pins = "gpio9";
+					function = "qup0_se2";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio10";
+					function = "qup0_se2";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio11";
+					function = "qup0_se2";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
 			qup_uart21_default: qup-uart21-default-state {
-				/* TX, RX */
-				pins = "gpio86", "gpio87";
-				function = "qup2_se5";
-				drive-strength = <2>;
-				bias-disable;
+				tx-pins {
+					pins = "gpio86";
+					function = "qup2_se5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio87";
+					function = "qup2_se5";
+					drive-strength = <2>;
+					bias-disable;
+				};
 			};
 		};