diff mbox series

[v4,12/12] arm64: dts: qcom: sm8450: Add 'global' interrupt to the PCIe RC node

Message ID 20240828-pci-qcom-hotplug-v4-12-263a385fbbcb@linaro.org (mailing list archive)
State Accepted
Commit 7dc36be39c96f00d0d7c577cc91ff6b108b1d444
Headers show
Series PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt | expand

Commit Message

Manivannan Sadhasivam via B4 Relay Aug. 28, 2024, 3:46 p.m. UTC 
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPUs. This interrupt can be used by the device driver to
identify events such as PCIe link specific events, safety events, etc...

Hence, add it to the PCIe RC node along with the existing MSI interrupts.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 9bafb3b350ff..564b071eb77c 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1787,7 +1787,8 @@  pcie0: pcie@1c00000 {
 				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1795,7 +1796,8 @@  pcie0: pcie@1c00000 {
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
@@ -1949,7 +1951,8 @@  pcie1: pcie@1c08000 {
 				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1957,7 +1960,8 @@  pcie1: pcie@1c08000 {
 					  "msi4",
 					  "msi5",
 					  "msi6",
-					  "msi7";
+					  "msi7",
+					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */