diff mbox series

[v4,07/12] ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node

Message ID 20240828-pci-qcom-hotplug-v4-7-263a385fbbcb@linaro.org (mailing list archive)
State Accepted
Commit 2014756b70d8a77fcac6fc5ce51e5dfca505a4e9
Headers show
Series PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt | expand

Commit Message

Manivannan Sadhasivam via B4 Relay Aug. 28, 2024, 3:46 p.m. UTC 
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.

Use this property to specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in SDX55 SoC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 68fa5859d263..d0f6120b665d 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -437,6 +437,7 @@  pcie_ep: pcie-ep@1c00000 {
 			phy-names = "pciephy";
 			max-link-speed = <3>;
 			num-lanes = <2>;
+			linux,pci-domain = <0>;
 
 			status = "disabled";
 		};