@@ -836,10 +836,12 @@ static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
- struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
- struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
+ struct dpu_sw_pipe_cfg pipe_cfg;
struct drm_rect fb_rect = { 0 };
+ const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
uint32_t max_linewidth;
+ u32 lm_num;
+ int cfg_idx = 0, cfg_id, mixercfg_num;
min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
max_scale = MAX_DOWNSCALE_RATIO << 16;
@@ -862,10 +864,10 @@ static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
return -EINVAL;
}
- /* state->src is 16.16, src_rect is not */
- drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
+ lm_num = dpu_crtc_get_lm_num(crtc_state);
- pipe_cfg->dst_rect = new_plane_state->dst;
+ /* state->src is 16.16, src_rect is not */
+ drm_rect_fp_to_int(&pipe_cfg.src_rect, &new_plane_state->src);
fb_rect.x2 = new_plane_state->fb->width;
fb_rect.y2 = new_plane_state->fb->height;
@@ -880,34 +882,77 @@ static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
max_linewidth = pdpu->catalog->caps->max_linewidth;
- drm_rect_rotate(&pipe_cfg->src_rect,
+ drm_rect_rotate(&pipe_cfg.src_rect,
new_plane_state->fb->width, new_plane_state->fb->height,
new_plane_state->rotation);
- if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
- _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
- if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
- DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
- DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
- return -E2BIG;
- }
+ /*
+ * We have 1 mixer cfg for 1:1:1 and 2:2:1 topology, 2 mixer configs
+ * for left and right half screen in case of 4:4:2 topology.
+ * But we may have 2 SSPP to split plane with 1 mixer config for 2:2:1.
+ * So need to handle super wide plane splitting, and plane on right half
+ * for dual-DSI case. Check dest rectangle left/right splitting
+ * first, then check super wide rectangle splitting next.
+ */
+ mixercfg_num = lm_num / 2;
+ mixercfg_num = mixercfg_num == 0 ? 1 : mixercfg_num;
+ /* iterate mixer configs for this plane, to separate left/right with the id */
+ for (cfg_id = 0; cfg_id < mixercfg_num; cfg_id++) {
+ struct drm_rect mixer_rect = {cfg_id * mode->hdisplay / mixercfg_num, 0,
+ (cfg_id + 1) * mode->hdisplay / mixercfg_num, mode->vdisplay};
+ struct dpu_sw_pipe_cfg *cur_cfg = &pstate->pipe_cfg[cfg_idx];
+
+ drm_rect_fp_to_int(&cur_cfg->src_rect, &new_plane_state->src);
+ cur_cfg->dst_rect = new_plane_state->dst;
+
+ DPU_DEBUG_PLANE(pdpu, "checking src " DRM_RECT_FMT " vs clip " DRM_RECT_FMT "\n",
+ DRM_RECT_ARG(&cur_cfg->src_rect), DRM_RECT_ARG(&mixer_rect));
+
+ /* If this plane does not fall into mixer rect, check next mixer rect */
+ if (!drm_rect_clip_scaled(&cur_cfg->src_rect, &cur_cfg->dst_rect, &mixer_rect))
+ continue;
- *r_pipe_cfg = *pipe_cfg;
- pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
- pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
- r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
- r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
- } else {
- memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
- }
+ cur_cfg->visible = true;
+ cur_cfg->mxcfg_id = cfg_id;
+ cur_cfg->dst_rect.x1 -= mixer_rect.x1;
+ cur_cfg->dst_rect.x2 -= mixer_rect.x1;
+
+ DPU_DEBUG_PLANE(pdpu, "Got clip src:" DRM_RECT_FMT " dst: " DRM_RECT_FMT "\n",
+ DRM_RECT_ARG(&cur_cfg->src_rect), DRM_RECT_ARG(&cur_cfg->dst_rect));
+
+ /* Split super wide rect into 2 rect */
+ if ((drm_rect_width(&cur_cfg->src_rect) > max_linewidth) ||
+ _dpu_plane_calc_clk(mode, cur_cfg) > max_mdp_clk_rate) {
+ struct dpu_sw_pipe_cfg *next_cfg = &pstate->pipe_cfg[cfg_idx + 1];
+
+ if (drm_rect_width(&cur_cfg->src_rect) > 2 * max_linewidth) {
+ DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+ DRM_RECT_ARG(&cur_cfg->src_rect), max_linewidth);
+ return -E2BIG;
+ }
+
+ memcpy(next_cfg, cur_cfg, sizeof(struct dpu_sw_pipe_cfg));
+ cur_cfg->src_rect.x2 = (cur_cfg->src_rect.x1 + cur_cfg->src_rect.x2) >> 1;
+ cur_cfg->dst_rect.x2 = (cur_cfg->dst_rect.x1 + cur_cfg->dst_rect.x2) >> 1;
+ next_cfg->src_rect.x1 = cur_cfg->src_rect.x2;
+ next_cfg->dst_rect.x1 = cur_cfg->dst_rect.x2;
+ next_cfg->visible = true;
+ next_cfg->mxcfg_id = cfg_id;
+ DPU_DEBUG_PLANE(pdpu, "Split super wide plane into:" DRM_RECT_FMT "and" DRM_RECT_FMT "\n",
+ DRM_RECT_ARG(&cur_cfg->src_rect), DRM_RECT_ARG(&next_cfg->src_rect));
+ cfg_idx++;
+ }
- drm_rect_rotate_inv(&pipe_cfg->src_rect,
- new_plane_state->fb->width, new_plane_state->fb->height,
- new_plane_state->rotation);
- if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
- drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
+ drm_rect_rotate_inv(&cur_cfg->src_rect,
new_plane_state->fb->width, new_plane_state->fb->height,
new_plane_state->rotation);
+ cfg_idx++;
+ }
+
+ for (; cfg_idx < MIX_CFGS_IN_CRTC; cfg_idx++) {
+ memset(&pstate->pipe_cfg[cfg_idx], 0, sizeof(struct dpu_sw_pipe_cfg));
+ memset(&pstate->pipe[cfg_idx], 0, sizeof(struct dpu_sw_pipe));
+ }
pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
Clip plane into SSPPs per left and right half screen per ROI if topology is quad pipe. Then split the split rectangle by half if the clip width still exceed limit. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 97 ++++++++++++++++++++++--------- 1 file changed, 71 insertions(+), 26 deletions(-)