diff mbox series

[16/21] drm/msm/dpu: support SSPP assignment for quad-pipe case

Message ID 20240829-sm8650-v6-11-hmd-pocf-mdss-quad-upstream-8-v1-16-bdb05b4b5a2e@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series drm/msm: Support quad pipe with dual-DSI | expand

Commit Message

Jun Nie Aug. 29, 2024, 10:17 a.m. UTC
Support SSPP assignment for quad-pipe case with unified method

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 58 +++++++++++++------------------
 1 file changed, 25 insertions(+), 33 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 95cb2575c63b4..c38c1bedd40fb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -1143,25 +1143,18 @@  static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 	struct dpu_rm_sspp_requirements reqs;
 	struct dpu_plane_state *pstate;
-	struct dpu_sw_pipe *pipe;
-	struct dpu_sw_pipe *r_pipe;
-	struct dpu_sw_pipe_cfg *pipe_cfg;
-	struct dpu_sw_pipe_cfg *r_pipe_cfg;
+	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	const struct msm_format *fmt;
 	uint32_t max_linewidth;
+	u32 i;
 
 	if (plane_state->crtc)
 		crtc_state = drm_atomic_get_new_crtc_state(state,
 							   plane_state->crtc);
 
 	pstate = to_dpu_plane_state(plane_state);
-	pipe = &pstate->pipe;
-	r_pipe = &pstate->r_pipe;
-	pipe_cfg = &pstate->pipe_cfg;
-	r_pipe_cfg = &pstate->r_pipe_cfg;
-
-	pipe->sspp = NULL;
-	r_pipe->sspp = NULL;
+	for (i = 0; i < PIPES_PER_STAGE; i++)
+		pstate->pipe[i].sspp = NULL;
 
 	if (!plane_state->fb)
 		return -EINVAL;
@@ -1175,41 +1168,40 @@  static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
 
 	max_linewidth = dpu_kms->catalog->caps->max_linewidth;
 
-	pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs);
-	if (!pipe->sspp)
-		return -ENODEV;
+	for (i = 0; i < PIPES_PER_STAGE; i++) {
+		struct dpu_sw_pipe *r_pipe = &pstate->pipe[i + 1];
+		struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->pipe_cfg[i + 1];
+		struct dpu_sw_pipe *pipe = &pstate->pipe[i];
+		struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg[i];
 
-	if (drm_rect_width(&r_pipe_cfg->src_rect) == 0) {
-		pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-		pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+		if (!pipe_cfg->visible)
+			break;
 
-		r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+		pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs);
+		if (!pipe->sspp)
+			return -ENODEV;
 
-		r_pipe->sspp = NULL;
-	} else {
-		if (dpu_plane_is_multirect_parallel_capable(pipe, pipe_cfg, fmt, max_linewidth) &&
-		    dpu_plane_is_multirect_parallel_capable(r_pipe, r_pipe_cfg, fmt, max_linewidth) &&
+		if (r_pipe_cfg->visible &&
+		    drm_rect_width(&r_pipe_cfg->src_rect) != 0 &&
+		    dpu_plane_is_multirect_parallel_capable(pipe_cfg, fmt, max_linewidth) &&
+		    dpu_plane_is_multirect_parallel_capable(r_pipe_cfg, fmt, max_linewidth) &&
+		    pipe_cfg->mxcfg_id == r_pipe_cfg->mxcfg_id &&
 		    (test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) ||
 		     test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features))) {
-			r_pipe->sspp = pipe->sspp;
-
 			pipe->multirect_index = DPU_SSPP_RECT_0;
 			pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
 
+			DPU_DEBUG_PLANE(pdpu, "allocating sspp_%d for pipe %d and set pipe %d as multi-rect\n",
+					pipe->sspp->idx, i, i+1);
+			r_pipe->sspp = pipe->sspp;
 			r_pipe->multirect_index = DPU_SSPP_RECT_1;
 			r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
+			i++;
 		} else {
-			/* multirect is not possible, use two SSPP blocks */
-			r_pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs);
-			if (!r_pipe->sspp)
-				return -ENODEV;
-
 			pipe->multirect_index = DPU_SSPP_RECT_SOLO;
 			pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-
-			r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-			r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+			DPU_DEBUG_PLANE(pdpu, "allocating sspp_%d for pipe %d.\n",
+					pipe->sspp->idx, i);
 		}
 	}