diff mbox series

[V2,2/4] remoteproc: qcom: add hexagon based WCSS secure PIL driver

Message ID 20240829134021.1452711-3-quic_gokulsri@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series Add new driver for WCSS secure PIL loading | expand

Commit Message

Gokul Sriram P Aug. 29, 2024, 1:40 p.m. UTC 
From: Vignesh Viswanathan <quic_viswanat@quicinc.com>

Add support to bring up hexagon based WCSS secure PIL remoteproc.
IPQ5332, IPQ9574 supports secure PIL remoteproc.

Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
---
changes since v1: Addressed comments by Krzysztof
	- moved of_node_put( ) before return value check to avoid
	  leaking refcount.
	- simplified if/else for error handling.
	- implemented 'devm_clk_get_enabled' instead of using
	  'devm_clk_get' and 'clk_prepare_enable' conscutively.
	- implemented 'dev_err_probe' for error handling.

 drivers/remoteproc/Kconfig              |  22 ++
 drivers/remoteproc/Makefile             |   1 +
 drivers/remoteproc/qcom_q6v5_wcss_sec.c | 354 ++++++++++++++++++++++++
 3 files changed, 377 insertions(+)
 create mode 100644 drivers/remoteproc/qcom_q6v5_wcss_sec.c

Comments

Dmitry Baryshkov Aug. 30, 2024, 7:41 a.m. UTC | #1 
On Thu, Aug 29, 2024 at 07:10:19PM GMT, Gokul Sriram Palanisamy wrote:
> From: Vignesh Viswanathan <quic_viswanat@quicinc.com>
> 
> Add support to bring up hexagon based WCSS secure PIL remoteproc.
> IPQ5332, IPQ9574 supports secure PIL remoteproc.

Could you please clarify, why this can't be handled by the qcom_q6v5_pas
driver.

> 
> Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
> ---
> changes since v1: Addressed comments by Krzysztof
> 	- moved of_node_put( ) before return value check to avoid
> 	  leaking refcount.
> 	- simplified if/else for error handling.
> 	- implemented 'devm_clk_get_enabled' instead of using
> 	  'devm_clk_get' and 'clk_prepare_enable' conscutively.
> 	- implemented 'dev_err_probe' for error handling.
> 
>  drivers/remoteproc/Kconfig              |  22 ++
>  drivers/remoteproc/Makefile             |   1 +
>  drivers/remoteproc/qcom_q6v5_wcss_sec.c | 354 ++++++++++++++++++++++++
>  3 files changed, 377 insertions(+)
>  create mode 100644 drivers/remoteproc/qcom_q6v5_wcss_sec.c
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 0f0862e20a93..3e7c6fc62ca1 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -255,6 +255,28 @@ config QCOM_Q6V5_WCSS
>  	  Hexagon V5 based WCSS remote processors on e.g. IPQ8074.  This is
>  	  a non-TrustZone wireless subsystem.
>  
> +config QCOM_Q6V5_WCSS_SEC
> +	tristate "Qualcomm Hexagon based WCSS Secure Peripheral Image Loader"
> +	depends on OF && ARCH_QCOM
> +	depends on QCOM_SMEM
> +	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
> +	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
> +	depends on QCOM_SYSMON || QCOM_SYSMON=n
> +	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
> +	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
> +	select QCOM_MDT_LOADER
> +	select QCOM_PIL_INFO
> +	select QCOM_Q6V5_COMMON
> +	select QCOM_RPROC_COMMON
> +	select QCOM_SCM
> +	help
> +	  Say y here to support the Qualcomm Secure Peripheral Image Loader
> +	  for the Hexagon based remote processors on e.g. IPQ5332.
> +
> +	  This is TrustZone wireless subsystem. The firmware is
> +	  verified and booted with the help of the Peripheral Authentication
> +	  System (PAS) in TrustZone.
> +
>  config QCOM_SYSMON
>  	tristate "Qualcomm sysmon driver"
>  	depends on RPMSG
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 5ff4e2fee4ab..d4971b672812 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_QCOM_Q6V5_ADSP)		+= qcom_q6v5_adsp.o
>  obj-$(CONFIG_QCOM_Q6V5_MSS)		+= qcom_q6v5_mss.o
>  obj-$(CONFIG_QCOM_Q6V5_PAS)		+= qcom_q6v5_pas.o
>  obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
> +obj-$(CONFIG_QCOM_Q6V5_WCSS_SEC)	+= qcom_q6v5_wcss_sec.o
>  obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
>  obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
>  qcom_wcnss_pil-y			+= qcom_wcnss.o
> diff --git a/drivers/remoteproc/qcom_q6v5_wcss_sec.c b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
> new file mode 100644
> index 000000000000..3c8bb2639567
> --- /dev/null
> +++ b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
> @@ -0,0 +1,354 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016-2018 Linaro Ltd.
> + * Copyright (C) 2014 Sony Mobile Communications AB
> + * Copyright (c) 2012-2018, 2024 The Linux Foundation. All rights reserved.
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/firmware/qcom/qcom_scm.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/soc/qcom/mdt_loader.h>
> +#include <linux/soc/qcom/smem.h>
> +#include <linux/soc/qcom/smem_state.h>
> +#include "qcom_common.h"
> +#include "qcom_q6v5.h"
> +
> +#include "remoteproc_internal.h"
> +
> +#define WCSS_CRASH_REASON		421
> +
> +#define WCSS_PAS_ID			0x6
> +#define MPD_WCSS_PAS_ID			0xD
> +
> +struct wcss_sec {
> +	struct device *dev;
> +	struct qcom_rproc_glink glink_subdev;
> +	struct qcom_rproc_ssr ssr_subdev;
> +	struct qcom_q6v5 q6;
> +	phys_addr_t mem_phys;
> +	phys_addr_t mem_reloc;
> +	void *mem_region;
> +	size_t mem_size;
> +	const struct wcss_data *desc;
> +	const char *fw_name;
> +
> +	struct clk *sleep_clk;
> +};
> +
> +struct wcss_data {
> +	u32 pasid;
> +	const struct rproc_ops *ops;
> +	bool need_auto_boot;

This isn't set anywere, drop it

> +	u8 bootargs_version;

Not used, drop it

> +	int (*init_clk)(struct wcss_sec *wcss);
> +};
> +
> +static int wcss_sec_start(struct rproc *rproc)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	const struct wcss_data *desc = of_device_get_match_data(dev);
> +	int ret;
> +
> +	qcom_q6v5_prepare(&wcss->q6);
> +
> +	ret = qcom_scm_pas_auth_and_reset(desc->pasid);
> +	if (ret) {
> +		dev_err(dev, "wcss_reset failed\n");
> +		return ret;
> +	}
> +
> +	ret = qcom_q6v5_wait_for_start(&wcss->q6, 5 * HZ);
> +	if (ret == -ETIMEDOUT)
> +		dev_err(dev, "start timed out\n");
> +
> +	return ret;
> +}
> +
> +static int wcss_sec_stop(struct rproc *rproc)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	const struct wcss_data *desc = of_device_get_match_data(dev);
> +	int ret;
> +
> +	ret = qcom_scm_pas_shutdown(desc->pasid);
> +	if (ret) {
> +		dev_err(dev, "not able to shutdown\n");
> +		return ret;
> +	}
> +	qcom_q6v5_unprepare(&wcss->q6);
> +
> +	return 0;
> +}
> +
> +static void *wcss_sec_da_to_va(struct rproc *rproc, u64 da, size_t len,
> +			       bool *is_iomem)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	int offset;
> +
> +	offset = da - wcss->mem_reloc;
> +	if (offset < 0 || offset + len > wcss->mem_size)
> +		return NULL;
> +
> +	return wcss->mem_region + offset;
> +}
> +
> +static int wcss_sec_load(struct rproc *rproc, const struct firmware *fw)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	const struct wcss_data *desc = of_device_get_match_data(dev);
> +
> +	return qcom_mdt_load(dev, fw, rproc->firmware, desc->pasid,
> +			     wcss->mem_region, wcss->mem_phys, wcss->mem_size,
> +			     &wcss->mem_reloc);

No qcom_pil_info_store() ?

> +}
> +
> +static unsigned long wcss_sec_panic(struct rproc *rproc)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +
> +	return qcom_q6v5_panic(&wcss->q6);
> +}
> +
> +static void wcss_sec_copy_segment(struct rproc *rproc,
> +				  struct rproc_dump_segment *segment,
> +				  void *dest, size_t offset, size_t size)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	void *ptr;
> +
> +	ptr = devm_ioremap_wc(dev, segment->da, segment->size);

Please don't use devm_ioremap if you are going to unmap it several lines
below. There is no need to burden devres with it.

> +	if (!ptr) {
> +		dev_err(dev, "Failed to ioremap segment %pad size %zx\n",
> +			&segment->da, segment->size);
> +		return;
> +	}
> +
> +	if (size <= segment->size - offset)
> +		memcpy(dest, ptr + offset, size);
> +	else
> +		dev_err(dev, "Copy size greater than segment size. Skipping\n");
> +	devm_iounmap(dev, ptr);
> +}
> +
> +static int wcss_sec_dump_segments(struct rproc *rproc,
> +				  const struct firmware *fw)
> +{
> +	struct device *dev = rproc->dev.parent;
> +	struct reserved_mem *rmem = NULL;
> +	struct device_node *node;
> +	int num_segs, index = 0;
> +	int ret;
> +
> +	/* Parse through additional reserved memory regions for the rproc
> +	 * and add them to the coredump segments
> +	 */
> +	num_segs = of_count_phandle_with_args(dev->of_node,
> +					      "memory-region", NULL);
> +	while (index < num_segs) {
> +		node = of_parse_phandle(dev->of_node,
> +					"memory-region", index);
> +		if (!node)
> +			return -EINVAL;
> +
> +		rmem = of_reserved_mem_lookup(node);
> +		of_node_put(node);
> +		if (!rmem) {
> +			dev_err(dev, "unable to acquire memory-region index %d num_segs %d\n",
> +				index, num_segs);
> +			return -EINVAL;
> +		}
> +
> +		dev_dbg(dev, "Adding segment 0x%pa size 0x%pa",
> +			&rmem->base, &rmem->size);
> +		ret = rproc_coredump_add_custom_segment(rproc,
> +							rmem->base,
> +							rmem->size,
> +							wcss_sec_copy_segment,
> +							NULL);
> +		if (ret)
> +			return ret;
> +
> +		index++;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct rproc_ops wcss_sec_ops = {
> +	.start = wcss_sec_start,
> +	.stop = wcss_sec_stop,
> +	.da_to_va = wcss_sec_da_to_va,
> +	.load = wcss_sec_load,
> +	.get_boot_addr = rproc_elf_get_boot_addr,
> +	.panic = wcss_sec_panic,
> +	.parse_fw = wcss_sec_dump_segments,
> +};
> +
> +static int wcss_sec_alloc_memory_region(struct wcss_sec *wcss)
> +{
> +	struct reserved_mem *rmem = NULL;
> +	struct device_node *node;
> +	struct device *dev = wcss->dev;
> +
> +	node = of_parse_phandle(dev->of_node, "memory-region", 0);
> +	if (!node) {
> +		dev_err(dev, "can't find phandle memory-region\n");
> +		return -EINVAL;
> +	}
> +
> +	rmem = of_reserved_mem_lookup(node);
> +	of_node_put(node);
> +
> +	if (!rmem) {
> +		dev_err(dev, "unable to acquire memory-region\n");
> +		return -EINVAL;
> +	}
> +
> +	wcss->mem_phys = rmem->base;
> +	wcss->mem_reloc = rmem->base;
> +	wcss->mem_size = rmem->size;
> +	wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
> +	if (!wcss->mem_region) {
> +		dev_err(dev, "unable to map memory region: %pa+%pa\n",
> +			&rmem->base, &rmem->size);
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
> +static int wcss_sec_probe(struct platform_device *pdev)
> +{
> +	struct wcss_sec *wcss;
> +	struct rproc *rproc;
> +	const char *fw_name = NULL;
> +	const struct wcss_data *desc = of_device_get_match_data(&pdev->dev);
> +	int ret;
> +
> +	if (!desc)
> +		return -EINVAL;
> +
> +	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
> +				      &fw_name);
> +	if (ret < 0)
> +		return ret;
> +
> +	rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, fw_name,
> +			    sizeof(*wcss));
> +	if (!rproc) {
> +		dev_err(&pdev->dev, "failed to allocate rproc\n");
> +		return -ENOMEM;
> +	}
> +
> +	wcss = rproc->priv;
> +	wcss->dev = &pdev->dev;
> +	wcss->desc = desc;
> +	wcss->fw_name = fw_name;
> +
> +	ret = wcss_sec_alloc_memory_region(wcss);
> +	if (ret)
> +		goto free_rproc;
> +
> +	if (desc->init_clk) {

Just use devm_clk_get_optional_enabled() instead of an optional
callback.

> +		ret = desc->init_clk(wcss);
> +		if (ret)
> +			goto free_rproc;
> +	}
> +
> +	ret = qcom_q6v5_init(&wcss->q6, pdev, rproc,
> +			     WCSS_CRASH_REASON, NULL, NULL);
> +	if (ret)
> +		goto free_rproc;
> +
> +	qcom_add_glink_subdev(rproc, &wcss->glink_subdev, "q6wcss");
> +	qcom_add_ssr_subdev(rproc, &wcss->ssr_subdev, pdev->name);
> +
> +	rproc->auto_boot = desc->need_auto_boot;
> +	rproc->dump_conf = RPROC_COREDUMP_INLINE;
> +	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
> +
> +	ret = rproc_add(rproc);
> +	if (ret)
> +		goto free_rproc;
> +
> +	platform_set_drvdata(pdev, rproc);
> +
> +	return 0;
> +
> +free_rproc:
> +	rproc_free(rproc);
> +
> +	return ret;
> +}
> +
> +static void wcss_sec_remove(struct platform_device *pdev)
> +{
> +	struct rproc *rproc = platform_get_drvdata(pdev);
> +	struct wcss_sec *wcss = rproc->priv;
> +
> +	qcom_q6v5_deinit(&wcss->q6);
> +
> +	rproc_del(rproc);
> +	rproc_free(rproc);
> +}
> +
> +static int wcss_sec_ipq5332_init_clk(struct wcss_sec *wcss)
> +{
> +	int ret;
> +	struct device *dev = wcss->dev;
> +
> +	wcss->sleep_clk = devm_clk_get_enabled(dev, "sleep");
> +	if (IS_ERR(wcss->sleep_clk)) {
> +		return dev_err_probe(dev, PTR_ERR(wcss->sleep_clk),
> +				     "Could not get sleep clock\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct wcss_data wcss_sec_ipq5332_res_init = {
> +	.pasid = MPD_WCSS_PAS_ID,
> +	.ops = &wcss_sec_ops,
> +	.bootargs_version = 2,
> +	.init_clk = wcss_sec_ipq5332_init_clk,
> +};
> +
> +static const struct wcss_data wcss_sec_ipq9574_res_init = {
> +	.pasid = WCSS_PAS_ID,
> +	.ops = &wcss_sec_ops,
> +};
> +
> +static const struct of_device_id wcss_sec_of_match[] = {
> +	{ .compatible = "qcom,ipq5332-wcss-sec-pil", .data = &wcss_sec_ipq5332_res_init },
> +	{ .compatible = "qcom,ipq9574-wcss-sec-pil", .data = &wcss_sec_ipq9574_res_init },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, wcss_sec_of_match);
> +
> +static struct platform_driver wcss_sec_driver = {
> +	.probe = wcss_sec_probe,
> +	.remove = wcss_sec_remove,
> +	.driver = {
> +		.name = "qcom-wcss-secure-pil",
> +		.of_match_table = wcss_sec_of_match,
> +	},
> +};
> +module_platform_driver(wcss_sec_driver);
> +
> +MODULE_DESCRIPTION("Hexagon WCSS Secure Peripheral Image Loader");
> +MODULE_LICENSE("GPL");
> -- 
> 2.34.1
>
Kathiravan Thirumoorthy Sept. 3, 2024, 4:37 a.m. UTC | #2 
On 8/29/2024 7:10 PM, Gokul Sriram Palanisamy wrote:
> From: Vignesh Viswanathan <quic_viswanat@quicinc.com>
> 
> Add support to bring up hexagon based WCSS secure PIL remoteproc.
> IPQ5332, IPQ9574 supports secure PIL remoteproc.
> 
> Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
> ---
> changes since v1: Addressed comments by Krzysztof
> 	- moved of_node_put( ) before return value check to avoid
> 	  leaking refcount.
> 	- simplified if/else for error handling.
> 	- implemented 'devm_clk_get_enabled' instead of using
> 	  'devm_clk_get' and 'clk_prepare_enable' conscutively.
> 	- implemented 'dev_err_probe' for error handling.
> 
>   drivers/remoteproc/Kconfig              |  22 ++
>   drivers/remoteproc/Makefile             |   1 +
>   drivers/remoteproc/qcom_q6v5_wcss_sec.c | 354 ++++++++++++++++++++++++
>   3 files changed, 377 insertions(+)
>   create mode 100644 drivers/remoteproc/qcom_q6v5_wcss_sec.c
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 0f0862e20a93..3e7c6fc62ca1 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -255,6 +255,28 @@ config QCOM_Q6V5_WCSS
>   	  Hexagon V5 based WCSS remote processors on e.g. IPQ8074.  This is
>   	  a non-TrustZone wireless subsystem.
>   
> +config QCOM_Q6V5_WCSS_SEC
> +	tristate "Qualcomm Hexagon based WCSS Secure Peripheral Image Loader"
> +	depends on OF && ARCH_QCOM
> +	depends on QCOM_SMEM
> +	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
> +	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
> +	depends on QCOM_SYSMON || QCOM_SYSMON=n
> +	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
> +	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
> +	select QCOM_MDT_LOADER
> +	select QCOM_PIL_INFO
> +	select QCOM_Q6V5_COMMON
> +	select QCOM_RPROC_COMMON
> +	select QCOM_SCM
> +	help
> +	  Say y here to support the Qualcomm Secure Peripheral Image Loader
> +	  for the Hexagon based remote processors on e.g. IPQ5332.
> +
> +	  This is TrustZone wireless subsystem. The firmware is
> +	  verified and booted with the help of the Peripheral Authentication
> +	  System (PAS) in TrustZone.
> +
>   config QCOM_SYSMON
>   	tristate "Qualcomm sysmon driver"
>   	depends on RPMSG
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 5ff4e2fee4ab..d4971b672812 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_QCOM_Q6V5_ADSP)		+= qcom_q6v5_adsp.o
>   obj-$(CONFIG_QCOM_Q6V5_MSS)		+= qcom_q6v5_mss.o
>   obj-$(CONFIG_QCOM_Q6V5_PAS)		+= qcom_q6v5_pas.o
>   obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
> +obj-$(CONFIG_QCOM_Q6V5_WCSS_SEC)	+= qcom_q6v5_wcss_sec.o
>   obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
>   obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
>   qcom_wcnss_pil-y			+= qcom_wcnss.o
> diff --git a/drivers/remoteproc/qcom_q6v5_wcss_sec.c b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
> new file mode 100644
> index 000000000000..3c8bb2639567
> --- /dev/null
> +++ b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
> @@ -0,0 +1,354 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016-2018 Linaro Ltd.
> + * Copyright (C) 2014 Sony Mobile Communications AB
> + * Copyright (c) 2012-2018, 2024 The Linux Foundation. All rights reserved.
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/firmware/qcom/qcom_scm.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/soc/qcom/mdt_loader.h>
> +#include <linux/soc/qcom/smem.h>
> +#include <linux/soc/qcom/smem_state.h>
> +#include "qcom_common.h"
> +#include "qcom_q6v5.h"
> +
> +#include "remoteproc_internal.h"
> +
> +#define WCSS_CRASH_REASON		421
> +
> +#define WCSS_PAS_ID			0x6
> +#define MPD_WCSS_PAS_ID			0xD
> +
> +struct wcss_sec {
> +	struct device *dev;
> +	struct qcom_rproc_glink glink_subdev;
> +	struct qcom_rproc_ssr ssr_subdev;
> +	struct qcom_q6v5 q6;
> +	phys_addr_t mem_phys;
> +	phys_addr_t mem_reloc;
> +	void *mem_region;
> +	size_t mem_size;
> +	const struct wcss_data *desc;
> +	const char *fw_name;
> +
> +	struct clk *sleep_clk;
> +};
> +
> +struct wcss_data {
> +	u32 pasid;
> +	const struct rproc_ops *ops;
> +	bool need_auto_boot;
> +	u8 bootargs_version;
> +	int (*init_clk)(struct wcss_sec *wcss);
> +};
> +
> +static int wcss_sec_start(struct rproc *rproc)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	const struct wcss_data *desc = of_device_get_match_data(dev);
> +	int ret;
> +
> +	qcom_q6v5_prepare(&wcss->q6);
> +
> +	ret = qcom_scm_pas_auth_and_reset(desc->pasid);
> +	if (ret) {
> +		dev_err(dev, "wcss_reset failed\n");
> +		return ret;
> +	}
> +
> +	ret = qcom_q6v5_wait_for_start(&wcss->q6, 5 * HZ);
> +	if (ret == -ETIMEDOUT)
> +		dev_err(dev, "start timed out\n");
> +
> +	return ret;
> +}
> +
> +static int wcss_sec_stop(struct rproc *rproc)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	const struct wcss_data *desc = of_device_get_match_data(dev);
> +	int ret;
> +
> +	ret = qcom_scm_pas_shutdown(desc->pasid);
> +	if (ret) {
> +		dev_err(dev, "not able to shutdown\n");
> +		return ret;
> +	}
> +	qcom_q6v5_unprepare(&wcss->q6);
> +
> +	return 0;
> +}
> +
> +static void *wcss_sec_da_to_va(struct rproc *rproc, u64 da, size_t len,
> +			       bool *is_iomem)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	int offset;
> +
> +	offset = da - wcss->mem_reloc;
> +	if (offset < 0 || offset + len > wcss->mem_size)
> +		return NULL;
> +
> +	return wcss->mem_region + offset;
> +}
> +
> +static int wcss_sec_load(struct rproc *rproc, const struct firmware *fw)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	const struct wcss_data *desc = of_device_get_match_data(dev);
> +
> +	return qcom_mdt_load(dev, fw, rproc->firmware, desc->pasid,
> +			     wcss->mem_region, wcss->mem_phys, wcss->mem_size,
> +			     &wcss->mem_reloc);
> +}
> +
> +static unsigned long wcss_sec_panic(struct rproc *rproc)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +
> +	return qcom_q6v5_panic(&wcss->q6);
> +}
> +
> +static void wcss_sec_copy_segment(struct rproc *rproc,
> +				  struct rproc_dump_segment *segment,
> +				  void *dest, size_t offset, size_t size)
> +{
> +	struct wcss_sec *wcss = rproc->priv;
> +	struct device *dev = wcss->dev;
> +	void *ptr;
> +
> +	ptr = devm_ioremap_wc(dev, segment->da, segment->size);
> +	if (!ptr) {
> +		dev_err(dev, "Failed to ioremap segment %pad size %zx\n",
> +			&segment->da, segment->size);
> +		return;
> +	}
> +
> +	if (size <= segment->size - offset)
> +		memcpy(dest, ptr + offset, size);
> +	else
> +		dev_err(dev, "Copy size greater than segment size. Skipping\n");
> +	devm_iounmap(dev, ptr);
> +}
> +
> +static int wcss_sec_dump_segments(struct rproc *rproc,
> +				  const struct firmware *fw)
> +{
> +	struct device *dev = rproc->dev.parent;
> +	struct reserved_mem *rmem = NULL;
> +	struct device_node *node;
> +	int num_segs, index = 0;
> +	int ret;
> +
> +	/* Parse through additional reserved memory regions for the rproc
> +	 * and add them to the coredump segments
> +	 */
> +	num_segs = of_count_phandle_with_args(dev->of_node,
> +					      "memory-region", NULL);
> +	while (index < num_segs) {
> +		node = of_parse_phandle(dev->of_node,
> +					"memory-region", index);
> +		if (!node)
> +			return -EINVAL;
> +
> +		rmem = of_reserved_mem_lookup(node);
> +		of_node_put(node);
> +		if (!rmem) {
> +			dev_err(dev, "unable to acquire memory-region index %d num_segs %d\n",
> +				index, num_segs);
> +			return -EINVAL;
> +		}
> +
> +		dev_dbg(dev, "Adding segment 0x%pa size 0x%pa",
> +			&rmem->base, &rmem->size);
> +		ret = rproc_coredump_add_custom_segment(rproc,
> +							rmem->base,
> +							rmem->size,
> +							wcss_sec_copy_segment,
> +							NULL);
> +		if (ret)
> +			return ret;
> +
> +		index++;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct rproc_ops wcss_sec_ops = {
> +	.start = wcss_sec_start,
> +	.stop = wcss_sec_stop,
> +	.da_to_va = wcss_sec_da_to_va,
> +	.load = wcss_sec_load,
> +	.get_boot_addr = rproc_elf_get_boot_addr,
> +	.panic = wcss_sec_panic,
> +	.parse_fw = wcss_sec_dump_segments,
> +};
> +
> +static int wcss_sec_alloc_memory_region(struct wcss_sec *wcss)
> +{
> +	struct reserved_mem *rmem = NULL;
> +	struct device_node *node;
> +	struct device *dev = wcss->dev;
> +
> +	node = of_parse_phandle(dev->of_node, "memory-region", 0);
> +	if (!node) {
> +		dev_err(dev, "can't find phandle memory-region\n");
> +		return -EINVAL;
> +	}
> +
> +	rmem = of_reserved_mem_lookup(node);
> +	of_node_put(node);
> +
> +	if (!rmem) {
> +		dev_err(dev, "unable to acquire memory-region\n");
> +		return -EINVAL;
> +	}
> +
> +	wcss->mem_phys = rmem->base;
> +	wcss->mem_reloc = rmem->base;
> +	wcss->mem_size = rmem->size;
> +	wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
> +	if (!wcss->mem_region) {
> +		dev_err(dev, "unable to map memory region: %pa+%pa\n",
> +			&rmem->base, &rmem->size);
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
> +static int wcss_sec_probe(struct platform_device *pdev)
> +{
> +	struct wcss_sec *wcss;
> +	struct rproc *rproc;
> +	const char *fw_name = NULL;
> +	const struct wcss_data *desc = of_device_get_match_data(&pdev->dev);
> +	int ret;
> +
> +	if (!desc)
> +		return -EINVAL;
> +
> +	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
> +				      &fw_name);
> +	if (ret < 0)
> +		return ret;
> +
> +	rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, fw_name,
> +			    sizeof(*wcss));


devm_rproc_alloc?


> +	if (!rproc) {
> +		dev_err(&pdev->dev, "failed to allocate rproc\n");
> +		return -ENOMEM;
> +	}
> +
> +	wcss = rproc->priv;
> +	wcss->dev = &pdev->dev;
> +	wcss->desc = desc;
> +	wcss->fw_name = fw_name;
> +
> +	ret = wcss_sec_alloc_memory_region(wcss);
> +	if (ret)
> +		goto free_rproc;
> +
> +	if (desc->init_clk) {
> +		ret = desc->init_clk(wcss);
> +		if (ret)
> +			goto free_rproc;
> +	}
> +
> +	ret = qcom_q6v5_init(&wcss->q6, pdev, rproc,
> +			     WCSS_CRASH_REASON, NULL, NULL);
> +	if (ret)
> +		goto free_rproc;
> +
> +	qcom_add_glink_subdev(rproc, &wcss->glink_subdev, "q6wcss");
> +	qcom_add_ssr_subdev(rproc, &wcss->ssr_subdev, pdev->name);
> +
> +	rproc->auto_boot = desc->need_auto_boot;
> +	rproc->dump_conf = RPROC_COREDUMP_INLINE;
> +	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
> +
> +	ret = rproc_add(rproc);
> +	if (ret)
> +		goto free_rproc;
> +
> +	platform_set_drvdata(pdev, rproc);
> +
> +	return 0;
> +
> +free_rproc:
> +	rproc_free(rproc);
> +
> +	return ret;
> +}
> +
> +static void wcss_sec_remove(struct platform_device *pdev)
> +{
> +	struct rproc *rproc = platform_get_drvdata(pdev);
> +	struct wcss_sec *wcss = rproc->priv;
> +
> +	qcom_q6v5_deinit(&wcss->q6);
> +
> +	rproc_del(rproc);
> +	rproc_free(rproc);
> +}
> +
> +static int wcss_sec_ipq5332_init_clk(struct wcss_sec *wcss)
> +{
> +	int ret;
> +	struct device *dev = wcss->dev;
> +
> +	wcss->sleep_clk = devm_clk_get_enabled(dev, "sleep");
> +	if (IS_ERR(wcss->sleep_clk)) {
> +		return dev_err_probe(dev, PTR_ERR(wcss->sleep_clk),
> +				     "Could not get sleep clock\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct wcss_data wcss_sec_ipq5332_res_init = {
> +	.pasid = MPD_WCSS_PAS_ID,
> +	.ops = &wcss_sec_ops,
> +	.bootargs_version = 2,
> +	.init_clk = wcss_sec_ipq5332_init_clk,
> +};
> +
> +static const struct wcss_data wcss_sec_ipq9574_res_init = {
> +	.pasid = WCSS_PAS_ID,
> +	.ops = &wcss_sec_ops,
> +};
> +
> +static const struct of_device_id wcss_sec_of_match[] = {
> +	{ .compatible = "qcom,ipq5332-wcss-sec-pil", .data = &wcss_sec_ipq5332_res_init },
> +	{ .compatible = "qcom,ipq9574-wcss-sec-pil", .data = &wcss_sec_ipq9574_res_init },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, wcss_sec_of_match);
> +
> +static struct platform_driver wcss_sec_driver = {
> +	.probe = wcss_sec_probe,
> +	.remove = wcss_sec_remove,
> +	.driver = {
> +		.name = "qcom-wcss-secure-pil",
> +		.of_match_table = wcss_sec_of_match,
> +	},
> +};
> +module_platform_driver(wcss_sec_driver);
> +
> +MODULE_DESCRIPTION("Hexagon WCSS Secure Peripheral Image Loader");
> +MODULE_LICENSE("GPL");
Jeff Johnson Oct. 11, 2024, 7:28 p.m. UTC | #3 
On 8/29/2024 6:40 AM, Gokul Sriram Palanisamy wrote:
...

> +++ b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
> @@ -0,0 +1,354 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016-2018 Linaro Ltd.
> + * Copyright (C) 2014 Sony Mobile Communications AB
> + * Copyright (c) 2012-2018, 2024 The Linux Foundation. All rights reserved.

I'm currently vetting a proposed ath driver change that is dependent upon two
of yours, and my vetting tools ran on your patchsets as well. This is one of
several issues that my vetting tools flagged.

This last copyright doesn't look correct.

As of December 2021 Qualcomm stopped assigning copyright to the Linux
Foundation via the Code Aurora Forum. Any Qualcomm contributions after
December 2021 should be Copyright Qualcomm Innovation Center, Inc.

So I suspect this last line should be replaced with two:
> + * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
Trilok Soni Oct. 11, 2024, 9:51 p.m. UTC | #4 
On 10/11/2024 12:28 PM, Jeff Johnson wrote:
> So I suspect this last line should be replaced with two:
>> + * Copyright (c) 2012-2018 The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.

I agree.
diff mbox series

Patch

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 0f0862e20a93..3e7c6fc62ca1 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -255,6 +255,28 @@  config QCOM_Q6V5_WCSS
 	  Hexagon V5 based WCSS remote processors on e.g. IPQ8074.  This is
 	  a non-TrustZone wireless subsystem.
 
+config QCOM_Q6V5_WCSS_SEC
+	tristate "Qualcomm Hexagon based WCSS Secure Peripheral Image Loader"
+	depends on OF && ARCH_QCOM
+	depends on QCOM_SMEM
+	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
+	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
+	depends on QCOM_SYSMON || QCOM_SYSMON=n
+	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
+	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
+	select QCOM_MDT_LOADER
+	select QCOM_PIL_INFO
+	select QCOM_Q6V5_COMMON
+	select QCOM_RPROC_COMMON
+	select QCOM_SCM
+	help
+	  Say y here to support the Qualcomm Secure Peripheral Image Loader
+	  for the Hexagon based remote processors on e.g. IPQ5332.
+
+	  This is TrustZone wireless subsystem. The firmware is
+	  verified and booted with the help of the Peripheral Authentication
+	  System (PAS) in TrustZone.
+
 config QCOM_SYSMON
 	tristate "Qualcomm sysmon driver"
 	depends on RPMSG
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 5ff4e2fee4ab..d4971b672812 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_QCOM_Q6V5_ADSP)		+= qcom_q6v5_adsp.o
 obj-$(CONFIG_QCOM_Q6V5_MSS)		+= qcom_q6v5_mss.o
 obj-$(CONFIG_QCOM_Q6V5_PAS)		+= qcom_q6v5_pas.o
 obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
+obj-$(CONFIG_QCOM_Q6V5_WCSS_SEC)	+= qcom_q6v5_wcss_sec.o
 obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
 obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
 qcom_wcnss_pil-y			+= qcom_wcnss.o
diff --git a/drivers/remoteproc/qcom_q6v5_wcss_sec.c b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
new file mode 100644
index 000000000000..3c8bb2639567
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
@@ -0,0 +1,354 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ * Copyright (C) 2014 Sony Mobile Communications AB
+ * Copyright (c) 2012-2018, 2024 The Linux Foundation. All rights reserved.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/soc/qcom/mdt_loader.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/smem_state.h>
+#include "qcom_common.h"
+#include "qcom_q6v5.h"
+
+#include "remoteproc_internal.h"
+
+#define WCSS_CRASH_REASON		421
+
+#define WCSS_PAS_ID			0x6
+#define MPD_WCSS_PAS_ID			0xD
+
+struct wcss_sec {
+	struct device *dev;
+	struct qcom_rproc_glink glink_subdev;
+	struct qcom_rproc_ssr ssr_subdev;
+	struct qcom_q6v5 q6;
+	phys_addr_t mem_phys;
+	phys_addr_t mem_reloc;
+	void *mem_region;
+	size_t mem_size;
+	const struct wcss_data *desc;
+	const char *fw_name;
+
+	struct clk *sleep_clk;
+};
+
+struct wcss_data {
+	u32 pasid;
+	const struct rproc_ops *ops;
+	bool need_auto_boot;
+	u8 bootargs_version;
+	int (*init_clk)(struct wcss_sec *wcss);
+};
+
+static int wcss_sec_start(struct rproc *rproc)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	const struct wcss_data *desc = of_device_get_match_data(dev);
+	int ret;
+
+	qcom_q6v5_prepare(&wcss->q6);
+
+	ret = qcom_scm_pas_auth_and_reset(desc->pasid);
+	if (ret) {
+		dev_err(dev, "wcss_reset failed\n");
+		return ret;
+	}
+
+	ret = qcom_q6v5_wait_for_start(&wcss->q6, 5 * HZ);
+	if (ret == -ETIMEDOUT)
+		dev_err(dev, "start timed out\n");
+
+	return ret;
+}
+
+static int wcss_sec_stop(struct rproc *rproc)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	const struct wcss_data *desc = of_device_get_match_data(dev);
+	int ret;
+
+	ret = qcom_scm_pas_shutdown(desc->pasid);
+	if (ret) {
+		dev_err(dev, "not able to shutdown\n");
+		return ret;
+	}
+	qcom_q6v5_unprepare(&wcss->q6);
+
+	return 0;
+}
+
+static void *wcss_sec_da_to_va(struct rproc *rproc, u64 da, size_t len,
+			       bool *is_iomem)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	int offset;
+
+	offset = da - wcss->mem_reloc;
+	if (offset < 0 || offset + len > wcss->mem_size)
+		return NULL;
+
+	return wcss->mem_region + offset;
+}
+
+static int wcss_sec_load(struct rproc *rproc, const struct firmware *fw)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	const struct wcss_data *desc = of_device_get_match_data(dev);
+
+	return qcom_mdt_load(dev, fw, rproc->firmware, desc->pasid,
+			     wcss->mem_region, wcss->mem_phys, wcss->mem_size,
+			     &wcss->mem_reloc);
+}
+
+static unsigned long wcss_sec_panic(struct rproc *rproc)
+{
+	struct wcss_sec *wcss = rproc->priv;
+
+	return qcom_q6v5_panic(&wcss->q6);
+}
+
+static void wcss_sec_copy_segment(struct rproc *rproc,
+				  struct rproc_dump_segment *segment,
+				  void *dest, size_t offset, size_t size)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	void *ptr;
+
+	ptr = devm_ioremap_wc(dev, segment->da, segment->size);
+	if (!ptr) {
+		dev_err(dev, "Failed to ioremap segment %pad size %zx\n",
+			&segment->da, segment->size);
+		return;
+	}
+
+	if (size <= segment->size - offset)
+		memcpy(dest, ptr + offset, size);
+	else
+		dev_err(dev, "Copy size greater than segment size. Skipping\n");
+	devm_iounmap(dev, ptr);
+}
+
+static int wcss_sec_dump_segments(struct rproc *rproc,
+				  const struct firmware *fw)
+{
+	struct device *dev = rproc->dev.parent;
+	struct reserved_mem *rmem = NULL;
+	struct device_node *node;
+	int num_segs, index = 0;
+	int ret;
+
+	/* Parse through additional reserved memory regions for the rproc
+	 * and add them to the coredump segments
+	 */
+	num_segs = of_count_phandle_with_args(dev->of_node,
+					      "memory-region", NULL);
+	while (index < num_segs) {
+		node = of_parse_phandle(dev->of_node,
+					"memory-region", index);
+		if (!node)
+			return -EINVAL;
+
+		rmem = of_reserved_mem_lookup(node);
+		of_node_put(node);
+		if (!rmem) {
+			dev_err(dev, "unable to acquire memory-region index %d num_segs %d\n",
+				index, num_segs);
+			return -EINVAL;
+		}
+
+		dev_dbg(dev, "Adding segment 0x%pa size 0x%pa",
+			&rmem->base, &rmem->size);
+		ret = rproc_coredump_add_custom_segment(rproc,
+							rmem->base,
+							rmem->size,
+							wcss_sec_copy_segment,
+							NULL);
+		if (ret)
+			return ret;
+
+		index++;
+	}
+
+	return 0;
+}
+
+static const struct rproc_ops wcss_sec_ops = {
+	.start = wcss_sec_start,
+	.stop = wcss_sec_stop,
+	.da_to_va = wcss_sec_da_to_va,
+	.load = wcss_sec_load,
+	.get_boot_addr = rproc_elf_get_boot_addr,
+	.panic = wcss_sec_panic,
+	.parse_fw = wcss_sec_dump_segments,
+};
+
+static int wcss_sec_alloc_memory_region(struct wcss_sec *wcss)
+{
+	struct reserved_mem *rmem = NULL;
+	struct device_node *node;
+	struct device *dev = wcss->dev;
+
+	node = of_parse_phandle(dev->of_node, "memory-region", 0);
+	if (!node) {
+		dev_err(dev, "can't find phandle memory-region\n");
+		return -EINVAL;
+	}
+
+	rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+
+	if (!rmem) {
+		dev_err(dev, "unable to acquire memory-region\n");
+		return -EINVAL;
+	}
+
+	wcss->mem_phys = rmem->base;
+	wcss->mem_reloc = rmem->base;
+	wcss->mem_size = rmem->size;
+	wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
+	if (!wcss->mem_region) {
+		dev_err(dev, "unable to map memory region: %pa+%pa\n",
+			&rmem->base, &rmem->size);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int wcss_sec_probe(struct platform_device *pdev)
+{
+	struct wcss_sec *wcss;
+	struct rproc *rproc;
+	const char *fw_name = NULL;
+	const struct wcss_data *desc = of_device_get_match_data(&pdev->dev);
+	int ret;
+
+	if (!desc)
+		return -EINVAL;
+
+	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+				      &fw_name);
+	if (ret < 0)
+		return ret;
+
+	rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, fw_name,
+			    sizeof(*wcss));
+	if (!rproc) {
+		dev_err(&pdev->dev, "failed to allocate rproc\n");
+		return -ENOMEM;
+	}
+
+	wcss = rproc->priv;
+	wcss->dev = &pdev->dev;
+	wcss->desc = desc;
+	wcss->fw_name = fw_name;
+
+	ret = wcss_sec_alloc_memory_region(wcss);
+	if (ret)
+		goto free_rproc;
+
+	if (desc->init_clk) {
+		ret = desc->init_clk(wcss);
+		if (ret)
+			goto free_rproc;
+	}
+
+	ret = qcom_q6v5_init(&wcss->q6, pdev, rproc,
+			     WCSS_CRASH_REASON, NULL, NULL);
+	if (ret)
+		goto free_rproc;
+
+	qcom_add_glink_subdev(rproc, &wcss->glink_subdev, "q6wcss");
+	qcom_add_ssr_subdev(rproc, &wcss->ssr_subdev, pdev->name);
+
+	rproc->auto_boot = desc->need_auto_boot;
+	rproc->dump_conf = RPROC_COREDUMP_INLINE;
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
+
+	ret = rproc_add(rproc);
+	if (ret)
+		goto free_rproc;
+
+	platform_set_drvdata(pdev, rproc);
+
+	return 0;
+
+free_rproc:
+	rproc_free(rproc);
+
+	return ret;
+}
+
+static void wcss_sec_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct wcss_sec *wcss = rproc->priv;
+
+	qcom_q6v5_deinit(&wcss->q6);
+
+	rproc_del(rproc);
+	rproc_free(rproc);
+}
+
+static int wcss_sec_ipq5332_init_clk(struct wcss_sec *wcss)
+{
+	int ret;
+	struct device *dev = wcss->dev;
+
+	wcss->sleep_clk = devm_clk_get_enabled(dev, "sleep");
+	if (IS_ERR(wcss->sleep_clk)) {
+		return dev_err_probe(dev, PTR_ERR(wcss->sleep_clk),
+				     "Could not get sleep clock\n");
+	}
+
+	return 0;
+}
+
+static const struct wcss_data wcss_sec_ipq5332_res_init = {
+	.pasid = MPD_WCSS_PAS_ID,
+	.ops = &wcss_sec_ops,
+	.bootargs_version = 2,
+	.init_clk = wcss_sec_ipq5332_init_clk,
+};
+
+static const struct wcss_data wcss_sec_ipq9574_res_init = {
+	.pasid = WCSS_PAS_ID,
+	.ops = &wcss_sec_ops,
+};
+
+static const struct of_device_id wcss_sec_of_match[] = {
+	{ .compatible = "qcom,ipq5332-wcss-sec-pil", .data = &wcss_sec_ipq5332_res_init },
+	{ .compatible = "qcom,ipq9574-wcss-sec-pil", .data = &wcss_sec_ipq9574_res_init },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, wcss_sec_of_match);
+
+static struct platform_driver wcss_sec_driver = {
+	.probe = wcss_sec_probe,
+	.remove = wcss_sec_remove,
+	.driver = {
+		.name = "qcom-wcss-secure-pil",
+		.of_match_table = wcss_sec_of_match,
+	},
+};
+module_platform_driver(wcss_sec_driver);
+
+MODULE_DESCRIPTION("Hexagon WCSS Secure Peripheral Image Loader");
+MODULE_LICENSE("GPL");