diff mbox series

[v2,3/3] arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855

Message ID 20240903093629.16242-4-brgl@bgdev.pl (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: sc8280xp: enable WLAN and Bluetooth | expand

Commit Message

Bartosz Golaszewski Sept. 3, 2024, 9:36 a.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
and bluetooth nodes to consume the PMU's outputs.

Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 98 ++++++++++++++++---
 1 file changed, 86 insertions(+), 12 deletions(-)

Comments

Dmitry Baryshkov Sept. 3, 2024, 2:18 p.m. UTC | #1
On Tue, Sep 03, 2024 at 11:36:28AM GMT, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
> and bluetooth nodes to consume the PMU's outputs.
> 
> Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 98 ++++++++++++++++---
>  1 file changed, 86 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 6a28cab97189..88b31550f9df 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -400,6 +400,67 @@ usb1_sbu_mux: endpoint {
>  			};
>  		};
>  	};
> +
> +	wcn6855-pmu {
> +		compatible = "qcom,wcn6855-pmu";
> +
> +		pinctrl-0 = <&wlan_en>;
> +		pinctrl-names = "default";
> +
> +		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
> +		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
> +
> +		vddio-supply = <&vreg_s10b>;
> +		vddaon-supply = <&vreg_s12b>;
> +		vddpmu-supply = <&vreg_s12b>;
> +		vddrfa0p95-supply = <&vreg_s12b>;
> +		vddrfa1p3-supply = <&vreg_s11b>;
> +		vddrfa1p9-supply = <&vreg_s1c>;
> +		vddpcie1p3-supply = <&vreg_s11b>;
> +		vddpcie1p9-supply = <&vreg_s1c>;

As the WiFi is now properly using the PMU, should we also remove some of
the regulator-always-on properties?

> +
Bartosz Golaszewski Sept. 5, 2024, 12:21 p.m. UTC | #2
On Tue, Sep 3, 2024 at 4:18 PM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Tue, Sep 03, 2024 at 11:36:28AM GMT, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> > Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
> > and bluetooth nodes to consume the PMU's outputs.
> >
> > Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > ---
> >  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 98 ++++++++++++++++---
> >  1 file changed, 86 insertions(+), 12 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > index 6a28cab97189..88b31550f9df 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > @@ -400,6 +400,67 @@ usb1_sbu_mux: endpoint {
> >                       };
> >               };
> >       };
> > +
> > +     wcn6855-pmu {
> > +             compatible = "qcom,wcn6855-pmu";
> > +
> > +             pinctrl-0 = <&wlan_en>;
> > +             pinctrl-names = "default";
> > +
> > +             wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
> > +             bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
> > +
> > +             vddio-supply = <&vreg_s10b>;
> > +             vddaon-supply = <&vreg_s12b>;
> > +             vddpmu-supply = <&vreg_s12b>;
> > +             vddrfa0p95-supply = <&vreg_s12b>;
> > +             vddrfa1p3-supply = <&vreg_s11b>;
> > +             vddrfa1p9-supply = <&vreg_s1c>;
> > +             vddpcie1p3-supply = <&vreg_s11b>;
> > +             vddpcie1p9-supply = <&vreg_s1c>;
>
> As the WiFi is now properly using the PMU, should we also remove some of
> the regulator-always-on properties?
>

I added a separate patch that doesn't seem to impact anything with the
PMU changes applied but will be easy to revert if something does
break.

Bart

> > +
>
> --
> With best wishes
> Dmitry
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 6a28cab97189..88b31550f9df 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -400,6 +400,67 @@  usb1_sbu_mux: endpoint {
 			};
 		};
 	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&wlan_en>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -927,6 +988,16 @@  wifi@0 {
 		compatible = "pci17cb,1103";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
 		qcom,ath11k-calibration-variant = "LE_X13S";
 	};
 };
@@ -1258,20 +1329,16 @@  &uart2 {
 	bluetooth {
 		compatible = "qcom,wcn6855-bt";
 
-		vddio-supply = <&vreg_s10b>;
-		vddbtcxmx-supply = <&vreg_s12b>;
-		vddrfacmn-supply = <&vreg_s12b>;
-		vddrfa0p8-supply = <&vreg_s12b>;
-		vddrfa1p2-supply = <&vreg_s11b>;
-		vddrfa1p7-supply = <&vreg_s1c>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
 
 		max-speed = <3200000>;
-
-		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
-		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&bt_default>;
-		pinctrl-names = "default";
 	};
 };
 
@@ -1761,4 +1828,11 @@  reset-pins {
 			bias-disable;
 		};
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
 };