| Message ID | 20240913121250.2995351-3-quic_srichara@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add minimal boot support for IPQ5424 | expand |
On 13/09/2024 14:12, Sricharan R wrote: > From: Sricharan Ramabadhran <quic_srichara@quicinc.com> > > Add device tree bindings for IPQ5332 TLMM block. > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > .../bindings/pinctrl/qcom,ipq5424-tlmm.yaml | 115 ++++++++++++++++++ > 1 file changed, 115 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml > new file mode 100644 > index 000000000000..a16d9725e368 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml > @@ -0,0 +1,115 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5424-tlmm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm IPQ5424 TLMM pin controller > + > +maintainers: > + - Bjorn Andersson <andersson@kernel.org> > + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Sorry, not me. I don't have this hardware. > + > +description: | Drop | > + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5424 SoC. > + > +allOf: > + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# > + > +properties: > + compatible: > + const: qcom,ipq5424-tlmm > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + gpio-reserved-ranges: > + minItems: 1 > + maxItems: 26 25, I believe is the max in such case > + > + gpio-line-names: > + maxItems: 50 > + Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
[..] >> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml >> @@ -0,0 +1,115 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5424-tlmm.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm IPQ5424 TLMM pin controller >> + >> +maintainers: >> + - Bjorn Andersson <andersson@kernel.org> >> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Sorry, not me. I don't have this hardware. > ok, will remove >> + >> +description: | > > Drop | > ok >> + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5424 SoC. >> + >> +allOf: >> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# >> + >> +properties: >> + compatible: >> + const: qcom,ipq5424-tlmm >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + maxItems: 1 >> + >> + gpio-reserved-ranges: >> + minItems: 1 >> + maxItems: 26 > > 25, I believe is the max in such case > ok >> + >> + gpio-line-names: >> + maxItems: 50 >> + > > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Thanks Regards, Sricharan
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml new file mode 100644 index 000000000000..a16d9725e368 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5424-tlmm.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5424-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ5424 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + Top Level Mode Multiplexer pin controller in Qualcomm IPQ5424 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,ipq5424-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 26 + + gpio-line-names: + maxItems: 50 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq5424-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq5424-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq5424-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-4][0-9])$" + minItems: 1 + maxItems: 50 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec, + audio_sec0, audio_sec1, core_voltage, cri_trng0, cri_trng1, + cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out, gcc_plltest, + gcc_tlmm, gpio, i2c0_scl, i2c0_sda, i2c1_scl, i2c1_sda, i2c11, + mac0, mac1, mdc_mst, mdc_slv, mdio_mst, mdio_slv, pcie0_clk, + pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake, + pcie3_clk, pcie3_wake, pll_test, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, PTA0_0, PTA0_1, PTA0_2, PTA10, PTA11, + pwm0, pwm1, pwm2, qdss_cti_trig_in_a0, qdss_cti_trig_out_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_out_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_out_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_b1, + qdss_traceclk_a, qdss_tracectl_a, qdss_tracedata_a, qspi_clk, + qspi_cs, qspi_data, resout, rx0, rx1, rx2, sdc_clk, sdc_cmd, + sdc_data, spi0, spi1, spi10, spi11, tsens_max, uart0, uart1, + wci_txd, wci_rxd, wsi_clk, wsi_data ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5424-tlmm"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 50>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + uart1_pins: uart1-state { + pins = "gpio43", "gpio44"; + function = "uart1"; + drive-strength = <8>; + bias-pull-up; + }; + };