[v5,2/5] arm64: dts: qcom: add Linksys EA9350 V3

Commit Message

Karl Chan Oct. 2, 2024, 11:28 p.m. UTC

Add device tree source for Linksys EA9350 V3 which is a WiFi router based on the IPQ5018 SoC.

As of now , only the UART,USB,USB LED,buttons is working.The front PWM LED require the IPQ PWM driver.Therefore the PWM LED isn't configed in the tree.

Also The original firmware from Linksys can only boot ARM32 kernels.

As of now There seems to be no way to boot ARM64 kernels on those device.

However, it is possible to use this device tree by compiling an ARM32 kernel instead.

Signed-off-by: Karl Chan <[e-mail]>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/ipq5018-linksys-jamaica.dts | 107 ++++++++++++++++++
 2 files changed, 108 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-linksys-jamaica.dts

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index ae002c7cf126..5c6fac2cc8c5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -10,6 +10,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-linksys-jamaica.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-tplink-archer-ax55-v1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-linksys-jamaica.dts b/arch/arm64/boot/dts/qcom/ipq5018-linksys-jamaica.dts
new file mode 100644
index 000000000000..2fe18733f9ca
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-linksys-jamaica.dts
@@ -0,0 +1,107 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+
+/dts-v1/;
+
+/*
+ * NOTE: The original firmware from Linksys can only boot ARM32 kernels.
+ *
+ * As of now There seems to be no way to boot ARM64 kernels on those device.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other IPQ5018 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom/qcom-ipq5018-linksys-jamaica.dts
+ */
+
+#include "ipq5018.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+
+/ {
+	model = "Linksys EA9350 V3";
+	compatible = "linksys,jamaica", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		button-1 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	button_pins: button-pins-state {
+		pins = "gpio27", "gpio28";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	led_pins: led-pins-state {
+		pins = "gpio19";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};