| Message ID | 20241009-patchv3_1-v4-1-cd683a9ca554@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Display enablement changes for Qualcomm SA8775P platform | expand |
On Wed, Oct 09, 2024 at 08:02:01PM +0530, Mahadevan wrote: > Document the MDSS hardware found on the Qualcomm SA8775P platform. > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Signed-off-by: Mahadevan <quic_mahap@quicinc.com> > --- > .../bindings/display/msm/qcom,sa8775p-mdss.yaml | 241 +++++++++++++++++++++ > 1 file changed, 241 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml > new file mode 100644 > index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml [...] > + > + display-controller@ae01000 { > + compatible = "qcom,sa8775p-dpu"; > + reg = <0x0ae01000 0x8f000>, > + <0x0aeb0000 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc_ahb_clk>, > + <&dispcc_mdp_lut_clk>, > + <&dispcc_mdp_clk>, > + <&dispcc_mdp_vsync_clk>; > + clock-names = "bus", > + "iface", > + "lut", > + "core", > + "vsync"; > + It's been more than a week since Rob reported issues with the bindings. Any updates? Obviously I can not pick up patches with binding errors. > + assigned-clocks = <&dispcc_mdp_vsync_clk>; > + assigned-clock-rates = <19200000>; > + > + operating-points-v2 = <&mdss0_mdp_opp_table>; > + power-domains = <&rpmhpd RPMHPD_MMCX>; > + > + interrupt-parent = <&mdss0>; > + interrupts = <0>; > +
On Fri, Oct 18, 2024 at 6:00 AM Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > On Wed, Oct 09, 2024 at 08:02:01PM +0530, Mahadevan wrote: > > Document the MDSS hardware found on the Qualcomm SA8775P platform. > > > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > Signed-off-by: Mahadevan <quic_mahap@quicinc.com> > > --- > > .../bindings/display/msm/qcom,sa8775p-mdss.yaml | 241 +++++++++++++++++++++ > > 1 file changed, 241 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml > > new file mode 100644 > > index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml > > [...] > > > + > > + display-controller@ae01000 { > > + compatible = "qcom,sa8775p-dpu"; > > + reg = <0x0ae01000 0x8f000>, > > + <0x0aeb0000 0x2008>; > > + reg-names = "mdp", "vbif"; > > + > > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > > + <&dispcc_ahb_clk>, > > + <&dispcc_mdp_lut_clk>, > > + <&dispcc_mdp_clk>, > > + <&dispcc_mdp_vsync_clk>; > > + clock-names = "bus", > > + "iface", > > + "lut", > > + "core", > > + "vsync"; > > + > > It's been more than a week since Rob reported issues with the bindings. > Any updates? Obviously I can not pick up patches with binding errors. Well, someone picked up this version rather than v5 which appears to have fixed it. So, probably need an incremental patch to fix the warning in linux-next. Rob
On Mon, 11 Nov 2024 at 19:06, Rob Herring <robh@kernel.org> wrote: > > On Fri, Oct 18, 2024 at 6:00 AM Dmitry Baryshkov > <dmitry.baryshkov@linaro.org> wrote: > > > > On Wed, Oct 09, 2024 at 08:02:01PM +0530, Mahadevan wrote: > > > Document the MDSS hardware found on the Qualcomm SA8775P platform. > > > > > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > > Signed-off-by: Mahadevan <quic_mahap@quicinc.com> > > > --- > > > .../bindings/display/msm/qcom,sa8775p-mdss.yaml | 241 +++++++++++++++++++++ > > > 1 file changed, 241 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml > > > new file mode 100644 > > > index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml > > > > [...] > > > > > + > > > + display-controller@ae01000 { > > > + compatible = "qcom,sa8775p-dpu"; > > > + reg = <0x0ae01000 0x8f000>, > > > + <0x0aeb0000 0x2008>; > > > + reg-names = "mdp", "vbif"; > > > + > > > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > > > + <&dispcc_ahb_clk>, > > > + <&dispcc_mdp_lut_clk>, > > > + <&dispcc_mdp_clk>, > > > + <&dispcc_mdp_vsync_clk>; > > > + clock-names = "bus", > > > + "iface", > > > + "lut", > > > + "core", > > > + "vsync"; > > > + > > > > It's been more than a week since Rob reported issues with the bindings. > > Any updates? Obviously I can not pick up patches with binding errors. > > Well, someone picked up this version rather than v5 which appears to > have fixed it. So, probably need an incremental patch to fix the > warning in linux-next. Well, I picked up v5, [1]. I will check if there are warnings and send a patch targeting linux-next / msm-fixes. [1] https://gitlab.freedesktop.org/lumag/msm/-/commit/409685915f00
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml new file mode 100644 index 0000000000000000000000000000000000000000..37c04ae6876f873c2cddc51b5160b1f54e2b5118 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml @@ -0,0 +1,241 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,sa8775p-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SA87755P Display MDSS + +maintainers: + - Mahadevan <quic_mahap@quicinc.com> + +description: + SA8775P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces and EDP etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,sa8775p-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: qcom,sa8775p-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + items: + - const: qcom,sa8775p-dp + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,sa8775p-gcc.h> + #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,sa8775p-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>, + <&mmss_noc MASTER_MDP1 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + + resets = <&dispcc_core_bcr>; + power-domains = <&dispcc_gdsc>; + + clocks = <&dispcc_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc_mdp_clk>; + + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,sa8775p-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdss0_mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss0>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss0_dp0_in>; + }; + }; + }; + + mdss0_mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + displayport-controller@af54000 { + compatible = "qcom,sa8775p-dp"; + + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + reg = <0xaf54000 0x104>, + <0xaf54200 0x0c0>, + <0xaf55000 0x770>, + <0xaf56000 0x09c>; + + interrupt-parent = <&mdss0>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_dptx0_aux_clk>, + <&dispcc_dptx0_link_clk>, + <&dispcc_dptx0_link_intf_clk>, + <&dispcc_dptx0_pixel0_clk>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>, + <&dispcc_mdss_dptx0_pixel0_clk_src>; + assigned-clock-parents = <&mdss0_edp_phy 0>, <&mdss0_edp_phy 1>; + + phys = <&mdss0_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SA8775P_MMCX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss0_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + mdss0_dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +...