| Message ID | 20241017130701.3301785-6-quic_kriskura@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add support for primary USB controller on QCS615 | expand |
On Thu, 17 Oct 2024 at 16:07, Krishna Kurapati <quic_kriskura@quicinc.com> wrote: > > Provide PHY configuration for the USB QMP PHY for QCS615 Platform. > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> After checking platform details, Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Please perform global s/QCS615/SM6150/ and s/qcs615/sm6150/ > --- > drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c > index d4fa1063ea61..c56ba8468538 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c > @@ -1123,6 +1123,9 @@ static const struct of_device_id qmp_usbc_of_match_table[] = { > }, { > .compatible = "qcom,qcm2290-qmp-usb3-phy", > .data = &qcm2290_usb3phy_cfg, > + }, { > + .compatible = "qcom,qcs615-qmp-usb3-phy", > + .data = &qcm2290_usb3phy_cfg, > }, { > .compatible = "qcom,sdm660-qmp-usb3-phy", > .data = &sdm660_usb3phy_cfg, > -- > 2.34.1 >
On 10/18/2024 2:27 AM, Dmitry Baryshkov wrote: > On Thu, 17 Oct 2024 at 16:07, Krishna Kurapati > <quic_kriskura@quicinc.com> wrote: >> >> Provide PHY configuration for the USB QMP PHY for QCS615 Platform. >> >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > After checking platform details, > > Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > Please perform global s/QCS615/SM6150/ and s/qcs615/sm6150/ QCS615 and SM6150 are different variants of the same SoC. QCS615 is an IoT variant, while SM6150 is a mobile variant. We are currently adding QCS615 SoC support to the upstream Kernel, as it is in an active development stage and we anticipate many products based on this SoC. On the other hand, the SM6150 is an older mobile platform that is unlikely to be used in new designs. For a product introduction of the QCS615, please refer to https://docs.qualcomm.com/bundle/publicresource/87-83838-1_REV_A_Qualcomm_IQ6_Series_Product_Brief.pdf > >> --- >> drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c >> index d4fa1063ea61..c56ba8468538 100644 >> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c >> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c >> @@ -1123,6 +1123,9 @@ static const struct of_device_id qmp_usbc_of_match_table[] = { >> }, { >> .compatible = "qcom,qcm2290-qmp-usb3-phy", >> .data = &qcm2290_usb3phy_cfg, >> + }, { >> + .compatible = "qcom,qcs615-qmp-usb3-phy", >> + .data = &qcm2290_usb3phy_cfg, >> }, { >> .compatible = "qcom,sdm660-qmp-usb3-phy", >> .data = &sdm660_usb3phy_cfg, >> -- >> 2.34.1 >> > >
On Fri, 18 Oct 2024 at 10:48, Tingwei Zhang <quic_tingweiz@quicinc.com> wrote: > > On 10/18/2024 2:27 AM, Dmitry Baryshkov wrote: > > On Thu, 17 Oct 2024 at 16:07, Krishna Kurapati > > <quic_kriskura@quicinc.com> wrote: > >> > >> Provide PHY configuration for the USB QMP PHY for QCS615 Platform. > >> > >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > >> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > After checking platform details, > > > > Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > Please perform global s/QCS615/SM6150/ and s/qcs615/sm6150/ > > QCS615 and SM6150 are different variants of the same SoC. QCS615 is an > IoT variant, while SM6150 is a mobile variant. We are currently adding > QCS615 SoC support to the upstream Kernel, as it is in an active > development stage and we anticipate many products based on this SoC. On > the other hand, the SM6150 is an older mobile platform that is unlikely > to be used in new designs. For a product introduction of the QCS615, > please refer to > https://docs.qualcomm.com/bundle/publicresource/87-83838-1_REV_A_Qualcomm_IQ6_Series_Product_Brief.pdf Yes, I guessed so. It would have been nice if it was documented this way from the beginning. Please note that we usually get support for the mobile SoC first. So in most of the cases devices use mobile compatible even for IoT platforms, see qrb5165, qrb4210, qcm6490 and other similar platforms. I simply asked to follow the established pattern. > > > > >> --- > >> drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 +++ > >> 1 file changed, 3 insertions(+) > >> > >> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c > >> index d4fa1063ea61..c56ba8468538 100644 > >> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c > >> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c > >> @@ -1123,6 +1123,9 @@ static const struct of_device_id qmp_usbc_of_match_table[] = { > >> }, { > >> .compatible = "qcom,qcm2290-qmp-usb3-phy", > >> .data = &qcm2290_usb3phy_cfg, > >> + }, { > >> + .compatible = "qcom,qcs615-qmp-usb3-phy", > >> + .data = &qcm2290_usb3phy_cfg, > >> }, { > >> .compatible = "qcom,sdm660-qmp-usb3-phy", > >> .data = &sdm660_usb3phy_cfg, > >> -- > >> 2.34.1 > >> > > > > > > > -- > Thanks, > Tingwei
On 10/18/2024 4:06 PM, Dmitry Baryshkov wrote: > On Fri, 18 Oct 2024 at 10:48, Tingwei Zhang <quic_tingweiz@quicinc.com> wrote: >> >> On 10/18/2024 2:27 AM, Dmitry Baryshkov wrote: >>> On Thu, 17 Oct 2024 at 16:07, Krishna Kurapati >>> <quic_kriskura@quicinc.com> wrote: >>>> >>>> Provide PHY configuration for the USB QMP PHY for QCS615 Platform. >>>> >>>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >>> >>> After checking platform details, >>> >>> Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >>> >>> Please perform global s/QCS615/SM6150/ and s/qcs615/sm6150/ >> >> QCS615 and SM6150 are different variants of the same SoC. QCS615 is an >> IoT variant, while SM6150 is a mobile variant. We are currently adding >> QCS615 SoC support to the upstream Kernel, as it is in an active >> development stage and we anticipate many products based on this SoC. On >> the other hand, the SM6150 is an older mobile platform that is unlikely >> to be used in new designs. For a product introduction of the QCS615, >> please refer to >> https://docs.qualcomm.com/bundle/publicresource/87-83838-1_REV_A_Qualcomm_IQ6_Series_Product_Brief.pdf > > Yes, I guessed so. It would have been nice if it was documented this > way from the beginning. > > Please note that we usually get support for the mobile SoC first. So > in most of the cases devices use mobile compatible even for IoT > platforms, see qrb5165, qrb4210, qcm6490 and other similar platforms. > I simply asked to follow the established pattern. Yes, we start from mobile variant for most of the platforms. There are some exceptions like sc7180 and sc7280 which we started from compute variant since they are widely used by compute platform on upstream Kernel. I think we have similar case here. QCS615 will be widely used by IOT products on upstream Kernel. We should have clarified this from beginning so there's no ambiguity. > >> >>> >>>> --- >>>> drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 3 +++ >>>> 1 file changed, 3 insertions(+) >>>> >>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c >>>> index d4fa1063ea61..c56ba8468538 100644 >>>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c >>>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c >>>> @@ -1123,6 +1123,9 @@ static const struct of_device_id qmp_usbc_of_match_table[] = { >>>> }, { >>>> .compatible = "qcom,qcm2290-qmp-usb3-phy", >>>> .data = &qcm2290_usb3phy_cfg, >>>> + }, { >>>> + .compatible = "qcom,qcs615-qmp-usb3-phy", >>>> + .data = &qcm2290_usb3phy_cfg, >>>> }, { >>>> .compatible = "qcom,sdm660-qmp-usb3-phy", >>>> .data = &sdm660_usb3phy_cfg, >>>> -- >>>> 2.34.1 >>>> >>> >>> >> >> >> -- >> Thanks, >> Tingwei > > >
On Fri, Oct 18, 2024 at 05:01:48PM +0800, Tingwei Zhang wrote: > On 10/18/2024 4:06 PM, Dmitry Baryshkov wrote: > > On Fri, 18 Oct 2024 at 10:48, Tingwei Zhang <quic_tingweiz@quicinc.com> wrote: > > > > > > On 10/18/2024 2:27 AM, Dmitry Baryshkov wrote: > > > > On Thu, 17 Oct 2024 at 16:07, Krishna Kurapati > > > > <quic_kriskura@quicinc.com> wrote: > > > > > > > > > > Provide PHY configuration for the USB QMP PHY for QCS615 Platform. > > > > > > > > > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > > > > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > > > > > After checking platform details, > > > > > > > > Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > > > > > Please perform global s/QCS615/SM6150/ and s/qcs615/sm6150/ > > > > > > QCS615 and SM6150 are different variants of the same SoC. QCS615 is an > > > IoT variant, while SM6150 is a mobile variant. We are currently adding > > > QCS615 SoC support to the upstream Kernel, as it is in an active > > > development stage and we anticipate many products based on this SoC. On > > > the other hand, the SM6150 is an older mobile platform that is unlikely > > > to be used in new designs. For a product introduction of the QCS615, > > > please refer to > > > https://docs.qualcomm.com/bundle/publicresource/87-83838-1_REV_A_Qualcomm_IQ6_Series_Product_Brief.pdf > > > > Yes, I guessed so. It would have been nice if it was documented this > > way from the beginning. > > > > Please note that we usually get support for the mobile SoC first. So > > in most of the cases devices use mobile compatible even for IoT > > platforms, see qrb5165, qrb4210, qcm6490 and other similar platforms. > > I simply asked to follow the established pattern. > > Yes, we start from mobile variant for most of the platforms. There are some > exceptions like sc7180 and sc7280 which we started from compute variant > since they are widely used by compute platform on upstream Kernel. I think > we have similar case here. QCS615 will be widely used by IOT products on > upstream Kernel. We should have clarified this from beginning so there's no > ambiguity. After offline discussion with Krzysztof, I'll lift my objection, so still Reviewed-by.
On 10/18/2024 3:41 PM, Dmitry Baryshkov wrote: > On Fri, Oct 18, 2024 at 05:01:48PM +0800, Tingwei Zhang wrote: >> On 10/18/2024 4:06 PM, Dmitry Baryshkov wrote: >>> On Fri, 18 Oct 2024 at 10:48, Tingwei Zhang <quic_tingweiz@quicinc.com> wrote: >>>> >>>> On 10/18/2024 2:27 AM, Dmitry Baryshkov wrote: >>>>> On Thu, 17 Oct 2024 at 16:07, Krishna Kurapati >>>>> <quic_kriskura@quicinc.com> wrote: >>>>>> >>>>>> Provide PHY configuration for the USB QMP PHY for QCS615 Platform. >>>>>> >>>>>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >>>>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >>>>> >>>>> After checking platform details, >>>>> >>>>> Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >>>>> >>>>> Please perform global s/QCS615/SM6150/ and s/qcs615/sm6150/ >>>> >>>> QCS615 and SM6150 are different variants of the same SoC. QCS615 is an >>>> IoT variant, while SM6150 is a mobile variant. We are currently adding >>>> QCS615 SoC support to the upstream Kernel, as it is in an active >>>> development stage and we anticipate many products based on this SoC. On >>>> the other hand, the SM6150 is an older mobile platform that is unlikely >>>> to be used in new designs. For a product introduction of the QCS615, >>>> please refer to >>>> https://docs.qualcomm.com/bundle/publicresource/87-83838-1_REV_A_Qualcomm_IQ6_Series_Product_Brief.pdf >>> >>> Yes, I guessed so. It would have been nice if it was documented this >>> way from the beginning. >>> >>> Please note that we usually get support for the mobile SoC first. So >>> in most of the cases devices use mobile compatible even for IoT >>> platforms, see qrb5165, qrb4210, qcm6490 and other similar platforms. >>> I simply asked to follow the established pattern. >> >> Yes, we start from mobile variant for most of the platforms. There are some >> exceptions like sc7180 and sc7280 which we started from compute variant >> since they are widely used by compute platform on upstream Kernel. I think >> we have similar case here. QCS615 will be widely used by IOT products on >> upstream Kernel. We should have clarified this from beginning so there's no >> ambiguity. > > After offline discussion with Krzysztof, I'll lift my objection, so > still Reviewed-by. > Thanks Dmitry. Can you help review patch-4 of the series. I made the changes you suggested on v1 (uppercase to lowercase and removing un-necessary re-inits). Regards, Krishna,
On Fri, Oct 18, 2024 at 03:53:22PM +0530, Krishna Kurapati wrote: > > > On 10/18/2024 3:41 PM, Dmitry Baryshkov wrote: > > On Fri, Oct 18, 2024 at 05:01:48PM +0800, Tingwei Zhang wrote: > > > On 10/18/2024 4:06 PM, Dmitry Baryshkov wrote: > > > > On Fri, 18 Oct 2024 at 10:48, Tingwei Zhang <quic_tingweiz@quicinc.com> wrote: > > > > > > > > > > On 10/18/2024 2:27 AM, Dmitry Baryshkov wrote: > > > > > > On Thu, 17 Oct 2024 at 16:07, Krishna Kurapati > > > > > > <quic_kriskura@quicinc.com> wrote: > > > > > > > > > > > > > > Provide PHY configuration for the USB QMP PHY for QCS615 Platform. > > > > > > > > > > > > > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > > > > > > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > > > > > > > > > After checking platform details, > > > > > > > > > > > > Unreviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > > > > > > > > > > Please perform global s/QCS615/SM6150/ and s/qcs615/sm6150/ > > > > > > > > > > QCS615 and SM6150 are different variants of the same SoC. QCS615 is an > > > > > IoT variant, while SM6150 is a mobile variant. We are currently adding > > > > > QCS615 SoC support to the upstream Kernel, as it is in an active > > > > > development stage and we anticipate many products based on this SoC. On > > > > > the other hand, the SM6150 is an older mobile platform that is unlikely > > > > > to be used in new designs. For a product introduction of the QCS615, > > > > > please refer to > > > > > https://docs.qualcomm.com/bundle/publicresource/87-83838-1_REV_A_Qualcomm_IQ6_Series_Product_Brief.pdf > > > > > > > > Yes, I guessed so. It would have been nice if it was documented this > > > > way from the beginning. > > > > > > > > Please note that we usually get support for the mobile SoC first. So > > > > in most of the cases devices use mobile compatible even for IoT > > > > platforms, see qrb5165, qrb4210, qcm6490 and other similar platforms. > > > > I simply asked to follow the established pattern. > > > > > > Yes, we start from mobile variant for most of the platforms. There are some > > > exceptions like sc7180 and sc7280 which we started from compute variant > > > since they are widely used by compute platform on upstream Kernel. I think > > > we have similar case here. QCS615 will be widely used by IOT products on > > > upstream Kernel. We should have clarified this from beginning so there's no > > > ambiguity. > > > > After offline discussion with Krzysztof, I'll lift my objection, so > > still Reviewed-by. > > > > Thanks Dmitry. > > Can you help review patch-4 of the series. I made the changes you suggested > on v1 (uppercase to lowercase and removing un-necessary re-inits). done
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c index d4fa1063ea61..c56ba8468538 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c @@ -1123,6 +1123,9 @@ static const struct of_device_id qmp_usbc_of_match_table[] = { }, { .compatible = "qcom,qcm2290-qmp-usb3-phy", .data = &qcm2290_usb3phy_cfg, + }, { + .compatible = "qcom,qcs615-qmp-usb3-phy", + .data = &qcm2290_usb3phy_cfg, }, { .compatible = "qcom,sdm660-qmp-usb3-phy", .data = &sdm660_usb3phy_cfg,