diff mbox series

[2/2] soc: qcom: llcc: add support for SAR2130P and SAR1130P

Message ID 20241019-sar2130p-llcc-v1-2-4e09063d04f2@linaro.org (mailing list archive)
State Superseded
Headers show
Series soc: qcom: llcc: add support for SAR2130P and SAR1130P platforms | expand

Commit Message

Dmitry Baryshkov Oct. 19, 2024, 4:26 p.m. UTC 
Implement necessary support for the LLCC control on the SAR1130P and
SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
shift and also require manual override for num_banks.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/soc/qcom/llcc-qcom.c       | 468 ++++++++++++++++++++++++++++++++++++-
 include/linux/soc/qcom/llcc-qcom.h |  12 +
 2 files changed, 474 insertions(+), 6 deletions(-)

Comments

Konrad Dybcio Oct. 21, 2024, 11:04 a.m. UTC | #1 
On 19.10.2024 6:26 PM, Dmitry Baryshkov wrote:
> Implement necessary support for the LLCC control on the SAR1130P and
> SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
> shift and also require manual override for num_banks.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/soc/qcom/llcc-qcom.c       | 468 ++++++++++++++++++++++++++++++++++++-
>  include/linux/soc/qcom/llcc-qcom.h |  12 +
>  2 files changed, 474 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> index a470285f54a875bf2262aac7b0f84ed8fd028ef1..ef84fe3b2af4e777126a8308bfd4ec47b28aeae2 100644
> --- a/drivers/soc/qcom/llcc-qcom.c
> +++ b/drivers/soc/qcom/llcc-qcom.c
> @@ -32,6 +32,7 @@
>  #define ATTR1_FIXED_SIZE_SHIFT        0x03
>  #define ATTR1_PRIORITY_SHIFT          0x04
>  #define ATTR1_MAX_CAP_SHIFT           0x10
> +#define ATTR1_MAX_CAP_SHIFT_sar       0x0e
>  #define ATTR0_RES_WAYS_MASK           GENMASK(15, 0)
>  #define ATTR0_BONUS_WAYS_MASK         GENMASK(31, 16)
>  #define ATTR0_BONUS_WAYS_SHIFT        0x10
> @@ -140,6 +141,11 @@ struct qcom_llcc_config {
>  	bool need_llcc_cfg;
>  	bool no_edac;
>  	bool irq_configured;
> +	/*
> +	 * special workarounds for SAR2130P and similar platforms which have
> +	 * slightly different register mapping.
> +	 */
> +	bool is_sar_chip;

This is not the only odd ball, please make max_cap_width variable

[...]

> +	/*
> +	 * For some reason register returns incorrect value here.
> +	 * List compatibles instead of using .is_sar_chip since there might be
> +	 * SAR-like chips which have other number of banks.
> +	 */
> +	if (of_device_is_compatible(dev->of_node, "qcom,sar1130p-llcc") ||
> +	    of_device_is_compatible(dev->of_node, "qcom,sar2130p-llcc")) {
> +		num_banks = 2;
> +	} else {
> +		ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
> +		if (ret)
> +			goto err;
> +
> +		num_banks &= LLCC_LB_CNT_MASK;
> +		num_banks >>= LLCC_LB_CNT_SHIFT;
> +	}
>  
> -	num_banks &= LLCC_LB_CNT_MASK;
> -	num_banks >>= LLCC_LB_CNT_SHIFT;
>  	drv_data->num_banks = num_banks;

This too

Konrad
Dmitry Baryshkov Oct. 21, 2024, 1:13 p.m. UTC | #2 
On Mon, 21 Oct 2024 at 14:04, Konrad Dybcio
<konrad.dybcio@oss.qualcomm.com> wrote:
>
> On 19.10.2024 6:26 PM, Dmitry Baryshkov wrote:
> > Implement necessary support for the LLCC control on the SAR1130P and
> > SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
> > shift and also require manual override for num_banks.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >  drivers/soc/qcom/llcc-qcom.c       | 468 ++++++++++++++++++++++++++++++++++++-
> >  include/linux/soc/qcom/llcc-qcom.h |  12 +
> >  2 files changed, 474 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
> > index a470285f54a875bf2262aac7b0f84ed8fd028ef1..ef84fe3b2af4e777126a8308bfd4ec47b28aeae2 100644
> > --- a/drivers/soc/qcom/llcc-qcom.c
> > +++ b/drivers/soc/qcom/llcc-qcom.c
> > @@ -32,6 +32,7 @@
> >  #define ATTR1_FIXED_SIZE_SHIFT        0x03
> >  #define ATTR1_PRIORITY_SHIFT          0x04
> >  #define ATTR1_MAX_CAP_SHIFT           0x10
> > +#define ATTR1_MAX_CAP_SHIFT_sar       0x0e
> >  #define ATTR0_RES_WAYS_MASK           GENMASK(15, 0)
> >  #define ATTR0_BONUS_WAYS_MASK         GENMASK(31, 16)
> >  #define ATTR0_BONUS_WAYS_SHIFT        0x10
> > @@ -140,6 +141,11 @@ struct qcom_llcc_config {
> >       bool need_llcc_cfg;
> >       bool no_edac;
> >       bool irq_configured;
> > +     /*
> > +      * special workarounds for SAR2130P and similar platforms which have
> > +      * slightly different register mapping.
> > +      */
> > +     bool is_sar_chip;
>
> This is not the only odd ball, please make max_cap_width variable

I'm not sure what you mean here. Moving max_cap_width to the drv_data
/ configuration? Or do you mean something else?

>
> [...]
>
> > +     /*
> > +      * For some reason register returns incorrect value here.
> > +      * List compatibles instead of using .is_sar_chip since there might be
> > +      * SAR-like chips which have other number of banks.
> > +      */
> > +     if (of_device_is_compatible(dev->of_node, "qcom,sar1130p-llcc") ||
> > +         of_device_is_compatible(dev->of_node, "qcom,sar2130p-llcc")) {
> > +             num_banks = 2;
> > +     } else {
> > +             ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
> > +             if (ret)
> > +                     goto err;
> > +
> > +             num_banks &= LLCC_LB_CNT_MASK;
> > +             num_banks >>= LLCC_LB_CNT_SHIFT;
> > +     }
> >
> > -     num_banks &= LLCC_LB_CNT_MASK;
> > -     num_banks >>= LLCC_LB_CNT_SHIFT;
> >       drv_data->num_banks = num_banks;
>
> This too

This can probably go to qcom_llcc_config.
Konrad Dybcio Oct. 21, 2024, 1:58 p.m. UTC | #3 
On 21.10.2024 3:13 PM, Dmitry Baryshkov wrote:
> On Mon, 21 Oct 2024 at 14:04, Konrad Dybcio
> <konrad.dybcio@oss.qualcomm.com> wrote:
>>
>> On 19.10.2024 6:26 PM, Dmitry Baryshkov wrote:
>>> Implement necessary support for the LLCC control on the SAR1130P and
>>> SAR2130P platforms. These two platforms use different ATTR1_MAX_CAP
>>> shift and also require manual override for num_banks.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>>>  drivers/soc/qcom/llcc-qcom.c       | 468 ++++++++++++++++++++++++++++++++++++-
>>>  include/linux/soc/qcom/llcc-qcom.h |  12 +
>>>  2 files changed, 474 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
>>> index a470285f54a875bf2262aac7b0f84ed8fd028ef1..ef84fe3b2af4e777126a8308bfd4ec47b28aeae2 100644
>>> --- a/drivers/soc/qcom/llcc-qcom.c
>>> +++ b/drivers/soc/qcom/llcc-qcom.c
>>> @@ -32,6 +32,7 @@
>>>  #define ATTR1_FIXED_SIZE_SHIFT        0x03
>>>  #define ATTR1_PRIORITY_SHIFT          0x04
>>>  #define ATTR1_MAX_CAP_SHIFT           0x10
>>> +#define ATTR1_MAX_CAP_SHIFT_sar       0x0e
>>>  #define ATTR0_RES_WAYS_MASK           GENMASK(15, 0)
>>>  #define ATTR0_BONUS_WAYS_MASK         GENMASK(31, 16)
>>>  #define ATTR0_BONUS_WAYS_SHIFT        0x10
>>> @@ -140,6 +141,11 @@ struct qcom_llcc_config {
>>>       bool need_llcc_cfg;
>>>       bool no_edac;
>>>       bool irq_configured;
>>> +     /*
>>> +      * special workarounds for SAR2130P and similar platforms which have
>>> +      * slightly different register mapping.
>>> +      */
>>> +     bool is_sar_chip;
>>
>> This is not the only odd ball, please make max_cap_width variable
> 
> I'm not sure what you mean here. Moving max_cap_width to the drv_data
> / configuration? Or do you mean something else?

Match data (qcom_llcc_config) is fine, as qcom_llcc_cfg_program is only
called from .probe.

max_cap_width would be a new field that denotes the width of MAX_CAP
(which seems to always be at [31:n])

> 
>>
>> [...]
>>
>>> +     /*
>>> +      * For some reason register returns incorrect value here.
>>> +      * List compatibles instead of using .is_sar_chip since there might be
>>> +      * SAR-like chips which have other number of banks.
>>> +      */
>>> +     if (of_device_is_compatible(dev->of_node, "qcom,sar1130p-llcc") ||
>>> +         of_device_is_compatible(dev->of_node, "qcom,sar2130p-llcc")) {
>>> +             num_banks = 2;
>>> +     } else {
>>> +             ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
>>> +             if (ret)
>>> +                     goto err;
>>> +
>>> +             num_banks &= LLCC_LB_CNT_MASK;
>>> +             num_banks >>= LLCC_LB_CNT_SHIFT;
>>> +     }
>>>
>>> -     num_banks &= LLCC_LB_CNT_MASK;
>>> -     num_banks >>= LLCC_LB_CNT_SHIFT;
>>>       drv_data->num_banks = num_banks;
>>
>> This too
> 
> This can probably go to qcom_llcc_config.

Yep

Konrad
diff mbox series

Patch

diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index a470285f54a875bf2262aac7b0f84ed8fd028ef1..ef84fe3b2af4e777126a8308bfd4ec47b28aeae2 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -32,6 +32,7 @@ 
 #define ATTR1_FIXED_SIZE_SHIFT        0x03
 #define ATTR1_PRIORITY_SHIFT          0x04
 #define ATTR1_MAX_CAP_SHIFT           0x10
+#define ATTR1_MAX_CAP_SHIFT_sar       0x0e
 #define ATTR0_RES_WAYS_MASK           GENMASK(15, 0)
 #define ATTR0_BONUS_WAYS_MASK         GENMASK(31, 16)
 #define ATTR0_BONUS_WAYS_SHIFT        0x10
@@ -140,6 +141,11 @@  struct qcom_llcc_config {
 	bool need_llcc_cfg;
 	bool no_edac;
 	bool irq_configured;
+	/*
+	 * special workarounds for SAR2130P and similar platforms which have
+	 * slightly different register mapping.
+	 */
+	bool is_sar_chip;
 };
 
 struct qcom_sct_config {
@@ -298,6 +304,408 @@  static const struct llcc_slice_config sa8775p_data[] =  {
 	},
 };
 
+static const struct llcc_slice_config sar1130p_data[] = {
+	{
+		.usecase_id = LLCC_CPUSS,
+		.slice_id = 1,
+		.max_cap = 4096,
+		.priority = 1,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+		.activate_on_init = true,
+	}, {
+		.usecase_id = LLCC_VIDSC0,
+		.slice_id = 2,
+		.max_cap = 512,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_AUDIO,
+		.slice_id = 6,
+		.max_cap = 1024,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_CMPT,
+		.slice_id = 10,
+		.max_cap = 1024,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_GPUHTW,
+		.slice_id = 11,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_GPU,
+		.slice_id = 12,
+		.max_cap = 3072,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+		.write_scid_en = true,
+	}, {
+		.usecase_id = LLCC_MMUHWT,
+		.slice_id = 13,
+		.max_cap = 512,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+	}, {
+		.usecase_id = LLCC_DISP,
+		.slice_id = 16,
+		.max_cap = 12800,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_CVP,
+		.slice_id = 28,
+		.max_cap = 256,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_APTCM,
+		.slice_id = 26,
+		.max_cap = 2048,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x3,
+		.cache_mode = true,
+		.dis_cap_alloc = true,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_WRCACHE,
+		.slice_id = 31,
+		.max_cap = 256,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.activate_on_init = true,
+	}, {
+		.usecase_id = LLCC_AENPU,
+		.slice_id = 30,
+		.max_cap = 3072,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x1fff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_DISP_LEFT,
+		.slice_id = 17,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_DISP_RIGHT,
+		.slice_id = 18,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_EVCS_LEFT,
+		.slice_id = 22,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_EVCS_RIGHT,
+		.slice_id = 23,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	},
+};
+
+static const struct llcc_slice_config sar2130p_data[] = {
+	{
+		.usecase_id = LLCC_CPUSS,
+		.slice_id = 1,
+		.max_cap = 6144,
+		.priority = 1,
+		.fixed_size = 0,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+		.activate_on_init = true,
+	}, {
+		.usecase_id = LLCC_VIDSC0,
+		.slice_id = 2,
+		.max_cap = 128,
+		.priority = 2,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_AUDIO,
+		.slice_id = 6,
+		.max_cap = 1024,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_CMPT,
+		.slice_id = 10,
+		.max_cap = 1024,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_GPUHTW,
+		.slice_id = 11,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_GPU,
+		.slice_id = 12,
+		.max_cap = 1536,
+		.priority = 2,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+		.write_scid_en = true,
+	}, {
+		.usecase_id = LLCC_MMUHWT,
+		.slice_id = 13,
+		.max_cap = 1024,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.activate_on_init = true,
+	}, {
+		.usecase_id = LLCC_DISP,
+		.slice_id = 16,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_APTCM,
+		.slice_id = 26,
+		.max_cap = 2048,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x3,
+		.cache_mode = true,
+		.dis_cap_alloc = true,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_WRCACHE,
+		.slice_id = 31,
+		.max_cap = 256,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.activate_on_init = true,
+	}, {
+		.usecase_id = LLCC_VIEYE,
+		.slice_id = 7,
+		.max_cap = 7168,
+		.priority = 4,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_VIDPTH,
+		.slice_id = 8,
+		.max_cap = 7168,
+		.priority = 4,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_GPUMV,
+		.slice_id = 9,
+		.max_cap = 2048,
+		.priority = 2,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_EVA_LEFT,
+		.slice_id = 20,
+		.max_cap = 7168,
+		.priority = 5,
+		.fixed_size = true,
+		.bonus_ways = 0x3ffffffc,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_EVA_RIGHT,
+		.slice_id = 21,
+		.max_cap = 7168,
+		.priority = 5,
+		.fixed_size = true,
+		.bonus_ways = 0x3ffffffc,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_EVAGAIN,
+		.slice_id = 25,
+		.max_cap = 1024,
+		.priority = 2,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_AENPU,
+		.slice_id = 30,
+		.max_cap = 3072,
+		.priority = 3,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_VIPTH,
+		.slice_id = 29,
+		.max_cap = 1024,
+		.priority = 4,
+		.fixed_size = true,
+		.bonus_ways = 0x3fffffff,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_DISP_LEFT,
+		.slice_id = 17,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_DISP_RIGHT,
+		.slice_id = 18,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_EVCS_LEFT,
+		.slice_id = 22,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_EVCS_RIGHT,
+		.slice_id = 23,
+		.max_cap = 0,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	}, {
+		.usecase_id = LLCC_SPAD,
+		.slice_id = 24,
+		.max_cap = 7168,
+		.priority = 1,
+		.fixed_size = true,
+		.bonus_ways = 0x0,
+		.res_ways = 0x0,
+		.cache_mode = 0,
+		.retain_on_pc = true,
+	},
+};
+
 static const struct llcc_slice_config sc7180_data[] =  {
 	{
 		.usecase_id = LLCC_CPUSS,
@@ -2687,6 +3095,28 @@  static const struct qcom_llcc_config sa8775p_cfg[] = {
 	},
 };
 
+static const struct qcom_llcc_config sar1130p_cfg[] = {
+	{
+		.sct_data	= sar1130p_data,
+		.size		= ARRAY_SIZE(sar1130p_data),
+		.need_llcc_cfg	= true,
+		.reg_offset	= llcc_v2_1_reg_offset,
+		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+		.is_sar_chip	= true,
+	},
+};
+
+static const struct qcom_llcc_config sar2130p_cfg[] = {
+	{
+		.sct_data	= sar2130p_data,
+		.size		= ARRAY_SIZE(sar2130p_data),
+		.need_llcc_cfg	= true,
+		.reg_offset	= llcc_v2_1_reg_offset,
+		.edac_reg_offset = &llcc_v2_1_edac_reg_offset,
+		.is_sar_chip	= true,
+	},
+};
+
 static const struct qcom_llcc_config sc7180_cfg[] = {
 	{
 		.sct_data	= sc7180_data,
@@ -2839,6 +3269,16 @@  static const struct qcom_sct_config sa8775p_cfgs = {
 	.num_config	= ARRAY_SIZE(sa8775p_cfg),
 };
 
+static const struct qcom_sct_config sar1130p_cfgs = {
+	.llcc_config	= sar1130p_cfg,
+	.num_config	= ARRAY_SIZE(sar1130p_cfg),
+};
+
+static const struct qcom_sct_config sar2130p_cfgs = {
+	.llcc_config	= sar2130p_cfg,
+	.num_config	= ARRAY_SIZE(sar2130p_cfg),
+};
+
 static const struct qcom_sct_config sc7180_cfgs = {
 	.llcc_config	= sc7180_cfg,
 	.num_config	= ARRAY_SIZE(sc7180_cfg),
@@ -3146,7 +3586,10 @@  static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config,
 	 */
 	max_cap_cacheline = max_cap_cacheline / drv_data->num_banks;
 	max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
-	attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT;
+	if (cfg->is_sar_chip)
+		attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT_sar;
+	else
+		attr1_val |= max_cap_cacheline << ATTR1_MAX_CAP_SHIFT;
 
 	attr1_cfg = LLCC_TRP_ATTR1_CFGn(config->slice_id);
 
@@ -3383,12 +3826,23 @@  static int qcom_llcc_probe(struct platform_device *pdev)
 		goto err;
 	cfg = &cfgs->llcc_config[cfg_index];
 
-	ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
-	if (ret)
-		goto err;
+	/*
+	 * For some reason register returns incorrect value here.
+	 * List compatibles instead of using .is_sar_chip since there might be
+	 * SAR-like chips which have other number of banks.
+	 */
+	if (of_device_is_compatible(dev->of_node, "qcom,sar1130p-llcc") ||
+	    of_device_is_compatible(dev->of_node, "qcom,sar2130p-llcc")) {
+		num_banks = 2;
+	} else {
+		ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
+		if (ret)
+			goto err;
+
+		num_banks &= LLCC_LB_CNT_MASK;
+		num_banks >>= LLCC_LB_CNT_SHIFT;
+	}
 
-	num_banks &= LLCC_LB_CNT_MASK;
-	num_banks >>= LLCC_LB_CNT_SHIFT;
 	drv_data->num_banks = num_banks;
 
 	drv_data->regmaps = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmaps), GFP_KERNEL);
@@ -3486,6 +3940,8 @@  static int qcom_llcc_probe(struct platform_device *pdev)
 static const struct of_device_id qcom_llcc_of_match[] = {
 	{ .compatible = "qcom,qdu1000-llcc", .data = &qdu1000_cfgs},
 	{ .compatible = "qcom,sa8775p-llcc", .data = &sa8775p_cfgs },
+	{ .compatible = "qcom,sar1130p-llcc", .data = &sar1130p_cfgs },
+	{ .compatible = "qcom,sar2130p-llcc", .data = &sar2130p_cfgs },
 	{ .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfgs },
 	{ .compatible = "qcom,sc7280-llcc", .data = &sc7280_cfgs },
 	{ .compatible = "qcom,sc8180x-llcc", .data = &sc8180x_cfgs },
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 2f20281d4ad4352ef59e7b19148cd324c7991012..8e5d78fb4847a232ab17a66c2775552dcb287752 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -54,7 +54,19 @@ 
 #define LLCC_CAMEXP4	 52
 #define LLCC_DISP_WB	 53
 #define LLCC_DISP_1	 54
+#define LLCC_VIEYE	 57
+#define LLCC_VIDPTH	 58
+#define LLCC_GPUMV	 59
+#define LLCC_EVA_LEFT	 60
+#define LLCC_EVA_RIGHT	 61
+#define LLCC_EVAGAIN	 62
+#define LLCC_VIPTH	 63
 #define LLCC_VIDVSP	 64
+#define LLCC_DISP_LEFT	 65
+#define LLCC_DISP_RIGHT	 66
+#define LLCC_EVCS_LEFT	 67
+#define LLCC_EVCS_RIGHT	 68
+#define LLCC_SPAD	 69
 
 /**
  * struct llcc_slice_desc - Cache slice descriptor