diff mbox series

[3/6] arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10

Message ID 20241025-b4-linux-next-24-10-25-camss-dts-fixups-v1-3-cdff2f1a5792@linaro.org (mailing list archive)
State Accepted
Commit ec83cf7581bd0a03e2a4a7145ffb4eda1f2e243a
Headers show
Series qcom: camss: dts: Prune and tidy x13s, rb5 and rb3 CAMSS dts | expand

Commit Message

Bryan O'Donoghue Oct. 25, 2024, 3:43 p.m. UTC 
clock-lanes does nothing here - the sensor doesn't care about this
property, remove it.

Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x13s
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 1 -
 1 file changed, 1 deletion(-)

Comments

Konrad Dybcio Oct. 25, 2024, 5:23 p.m. UTC | #1 
On 25.10.2024 5:43 PM, Bryan O'Donoghue wrote:
> clock-lanes does nothing here - the sensor doesn't care about this
> property, remove it.
> 
> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x13s
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---

drivers/media/platform/qcom/camss/camss.c : camss_of_parse_endpoint_node()

seems to reference it and pass it on to the PHY drivers

Konrad
Bryan O'Donoghue Oct. 25, 2024, 7:39 p.m. UTC | #2 
On 25/10/2024 18:23, Konrad Dybcio wrote:
> On 25.10.2024 5:43 PM, Bryan O'Donoghue wrote:
>> clock-lanes does nothing here - the sensor doesn't care about this
>> property, remove it.
>>
>> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x13s
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> ---
> 
> drivers/media/platform/qcom/camss/camss.c : camss_of_parse_endpoint_node()
> 
> seems to reference it and pass it on to the PHY drivers
> 
> Konrad

Yep but that parses the clock-lane indicator in camss ports

&camss {
         vdda-phy-supply = <&vreg_l6d>;
         vdda-pll-supply = <&vreg_l4d>;

         status = "okay";

         ports {
                 port@0 {
                         csiphy0_lanes01_ep: endpoint@0 {
                                 reg = <0>; // HERE
                                 clock-lanes = <7>;
                                 data-lanes = <0 1>;
                                 remote-endpoint = <&ov5675_ep>;
                         };
                 };
         };
};

this patch and its sister patch remove clock-lanes form the sensor

&cci2_i2c1 {
         camera@10 {

		<snip>
                 port {
                         ov5675_ep: endpoint {
				clock-lanes = <0>;//HERE
                                 data-lanes = <1 2>;
				<snip>
                         };
                 };

         };
};

This is removing the camera@10{} clock-lanes not the camss{} clock lanes 
which you're right is referenced.

---
bod
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index 83208b10f994b282ed50c3ba8a82298b6fc50deb..15f59b622bcd4250f43d329fd9a371ae4d0a73c6 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -633,7 +633,6 @@  camera@10 {
 
 		port {
 			ov5675_ep: endpoint {
-				clock-lanes = <0>;
 				data-lanes = <1 2>;
 				link-frequencies = /bits/ 64 <450000000>;
 				remote-endpoint = <&csiphy0_lanes01_ep>;