diff mbox series

[v6,5/7] arm64: dts: qcom: ipq5332: Add thermal zone nodes

Message ID 20241104124413.2012794-6-quic_mmanikan@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add TSENS support for IPQ5332, IPQ5424 | expand

Commit Message

Manikanta Mylavarapu Nov. 4, 2024, 12:44 p.m. UTC
From: Praveenkumar I <quic_ipkumar@quicinc.com>

This patch adds thermal zone nodes for sensors present in
IPQ5332.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
---
Changes in V6:
	- No change

 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 78 +++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 94dca05fdc2a..72d724d67587 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -554,4 +554,82 @@  timer {
 			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	thermal-zones {
+		rfa-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				rfa-0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rfa-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				rfa-1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		misc-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				misc-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				cpu-top-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top-glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };