diff mbox series

[v7,6/7] arm64: dts: qcom: ipq5424: Add tsens node

Message ID 20241107140550.3260859-7-quic_mmanikan@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add TSENS support for IPQ5332, IPQ5424 | expand

Commit Message

Manikanta Mylavarapu Nov. 7, 2024, 2:05 p.m. UTC
IPQ5424 has tsens v2.3.3 peripheral. This patch adds the tsense
node with nvmem cells for calibration data.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
---
Changes in V7:
	- No change

 arch/arm64/boot/dts/qcom/ipq5424.dtsi | 87 +++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 76af0d87e9a8..e97cf6529dd7 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -137,6 +137,93 @@  soc@0 {
 		#size-cells = <2>;
 		ranges = <0 0 0 0 0x10 0>;
 
+		efuse@a4000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0 0x000a4000 0 0x741>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			s9: s9@3dc {
+				reg = <0x3dc 0x1>;
+				bits = <4 4>;
+			};
+
+			s10: s10@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <0 4>;
+			};
+
+			s11: s11@3dd {
+				reg = <0x3dd 0x1>;
+				bits = <4 4>;
+			};
+
+			s12: s12@3de {
+				reg = <0x3de 0x1>;
+				bits = <0 4>;
+			};
+
+			s13: s13@3de {
+				reg = <0x3de 0x1>;
+				bits = <4 4>;
+			};
+
+			s14: s14@3e5 {
+				reg = <0x3e5 0x2>;
+				bits = <7 4>;
+			};
+
+			s15: s15@3e6 {
+				reg = <0x3e6 0x1>;
+				bits = <3 4>;
+			};
+
+			tsens_mode: mode@419 {
+				reg = <0x419 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base0: base0@419 {
+				reg = <0x419 0x2>;
+				bits = <3 10>;
+			};
+
+			tsens_base1: base1@41a {
+				reg = <0x41a 0x2>;
+				bits = <5 10>;
+			};
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5424-tsens";
+			reg = <0 0x004a9000 0 0x1000>,
+			      <0 0x004a8000 0 0x1000>;
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base0>,
+				      <&tsens_base1>,
+				      <&s9>,
+				      <&s10>,
+				      <&s11>,
+				      <&s12>,
+				      <&s13>,
+				      <&s14>,
+				      <&s15>;
+			nvmem-cell-names = "mode",
+					   "base0",
+					   "base1",
+					   "s9",
+					   "s10",
+					   "s11",
+					   "s12",
+					   "s13",
+					   "s14",
+					   "s15";
+			interrupts = <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "combined";
+			#qcom,sensors = <7>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5424-tlmm";
 			reg = <0 0x01000000 0 0x300000>;