@@ -1,7 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_QCOMTEE) += qcomtee.o
qcomtee-objs += async.o
+qcomtee-objs += call.o
qcomtee-objs += core.o
qcomtee-objs += primordial_obj.o
qcomtee-objs += qcom_scm.o
qcomtee-objs += release.o
+qcomtee-objs += user_obj.o
new file mode 100644
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/tee.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/firmware/qcom/qcom_tzmem.h>
+#include <linux/firmware/qcom/qcom_scm.h>
+
+#include "qcomtee_private.h"
+
+/**
+ * enum qcom_tee_object_host - Object host where it is managed.
+ * @QCOM_TEE_OBJECT_HOST_USER: objects in userspace.
+ * @QCOM_TEE_OBJECT_HOST_TEE: objects in QTEE.
+ *
+ * We refer to object hosted in userspace as 'Local Object' and objects hosted
+ * in QTEE as 'Remote Object'.
+ */
+enum qcom_tee_object_host {
+ QCOM_TEE_OBJECT_HOST_USER, /* Object that is managed in userspace. */
+ QCOM_TEE_OBJECT_HOST_TEE, /* Object that is managed in QTEE. */
+};
+
+/* Read object ID host information. */
+static enum qcom_tee_object_host qcom_tee_object_host(struct tee_param *param)
+{
+ if (param->u.objref.flags & QCOM_TEE_OBJREF_FLAG_USER)
+ return QCOM_TEE_OBJECT_HOST_USER;
+ return QCOM_TEE_OBJECT_HOST_TEE;
+}
+
+/* qcom_tee_context_add_qtee_object() - Add a QTEE object to the context.
+ * @param: TEE parameter represents @object.
+ * @object: QTEE object.
+ * @ctx: context to add the object.
+ *
+ * It assumes @object is %QCOM_TEE_OBJECT_TYPE_TEE and caller has already issued
+ * qcom_tee_object_get() for @object.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_context_add_qtee_object(struct tee_param *param, struct qcom_tee_object *object,
+ struct qcom_tee_context *ctx)
+{
+ int ret;
+
+ guard(mutex)(&ctx->lock);
+ ret = idr_alloc(&ctx->qtee_objects_idr, object, 0, 0, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+
+ param->u.objref.id = ret;
+ /* QTEE Object: !QCOM_TEE_OBJREF_FLAG_USER. */
+ param->u.objref.flags = 0;
+
+ return 0;
+}
+
+static int find_qtee_object(struct qcom_tee_object **object, unsigned long id,
+ struct qcom_tee_context *ctx)
+{
+ int err = 0;
+
+ guard(rcu)();
+ /* Object release is RCU protected. */
+ *object = idr_find(&ctx->qtee_objects_idr, id);
+ if (!qcom_tee_object_get(*object))
+ err = -EINVAL;
+
+ return err;
+}
+
+static void del_qtee_object(unsigned long id, struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_object *object;
+
+ scoped_guard(mutex, &ctx->lock)
+ object = idr_remove(&ctx->qtee_objects_idr, id);
+ qcom_tee_object_put(object);
+}
+
+/* Get the QTEE object added with qcom_tee_context_add_qtee_object(). */
+int qcom_tee_context_find_qtee_object(struct qcom_tee_object **object, struct tee_param *param,
+ struct qcom_tee_context *ctx)
+{
+ /* 'qtee_objects_idr' stores QTEE objects only. */
+ if (qcom_tee_object_host(param) != QCOM_TEE_OBJECT_HOST_TEE)
+ return -EINVAL;
+ return find_qtee_object(object, param->u.objref.id, ctx);
+}
+
+/**
+ * qcom_tee_context_del_qtee_object() - Delete a QTEE object from the context.
+ * @param: TEE parameter represents @object.
+ * @ctx: context to delete the object.
+ *
+ * @param returned by qcom_tee_context_add_qtee_object().
+ */
+void qcom_tee_context_del_qtee_object(struct tee_param *param, struct qcom_tee_context *ctx)
+{
+ /* 'qtee_objects_idr' stores QTEE objects only. */
+ if (qcom_tee_object_host(param) == QCOM_TEE_OBJECT_HOST_TEE)
+ del_qtee_object(param->u.objref.id, ctx);
+}
+
+/**
+ * qcom_tee_objref_to_arg() - Convert OBJREF parameter to QTEE argument in a context.
+ * @arg: QTEE argument.
+ * @param: TEE parameter.
+ * @ctx: context in which the conversion should happen.
+ *
+ * It assumes @param is OBJREF.
+ * It does not set @arg.type; caller should initialize it to a correct
+ * &enum qcom_tee_arg_type value.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_objref_to_arg(struct qcom_tee_arg *arg, struct tee_param *param,
+ struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_object *object;
+ int err;
+
+ if (arg->type != QCOM_TEE_ARG_TYPE_IO &&
+ arg->type != QCOM_TEE_ARG_TYPE_OO)
+ return -EINVAL;
+
+ /* It is a NULL object?! */
+ if (param->u.objref.id == TEE_OBJREF_NULL) {
+ arg->o = NULL_QCOM_TEE_OBJECT;
+
+ return 0;
+ }
+
+ switch (qcom_tee_object_host(param)) {
+ case QCOM_TEE_OBJECT_HOST_USER:
+ err = qcom_tee_user_param_to_object(&object, param, ctx);
+ if (err)
+ break;
+
+ /* Keep a copy for driver as QTEE may release it (e.g. using async msg). */
+ qcom_tee_object_get(object);
+
+ break;
+ case QCOM_TEE_OBJECT_HOST_TEE:
+ err = qcom_tee_context_find_qtee_object(&object, param, ctx);
+
+ break;
+ }
+
+ arg->o = err ? NULL_QCOM_TEE_OBJECT : object;
+
+ return err;
+}
+
+/**
+ * qcom_tee_objref_from_arg() - Convert QTEE argument to OBJREF param in a context.
+ * @param: TEE parameter.
+ * @arg: QTEE argument.
+ * @ctx: context in which the conversion should happen.
+ *
+ * It assumes @arg is of %QCOM_TEE_ARG_TYPE_IO or %QCOM_TEE_ARG_TYPE_OO.
+ * It does not set @param.attr; caller should initialize it to a correct OBJREF type.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_objref_from_arg(struct tee_param *param, struct qcom_tee_arg *arg,
+ struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_object *object;
+ int err;
+
+ /* param should be of OBJREF. */
+ if (param->attr != TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT &&
+ param->attr != TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT &&
+ param->attr != TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INOUT)
+ return -EINVAL;
+
+ object = arg->o;
+
+ switch (typeof_qcom_tee_object(object)) {
+ case QCOM_TEE_OBJECT_TYPE_NULL:
+ param->u.objref.id = TEE_OBJREF_NULL;
+ err = 0;
+
+ break;
+ case QCOM_TEE_OBJECT_TYPE_CB_OBJECT:
+ err = qcom_tee_user_param_from_object(param, object, ctx);
+
+ break;
+ case QCOM_TEE_OBJECT_TYPE_TEE:
+ err = qcom_tee_context_add_qtee_object(param, object, ctx);
+
+ break;
+ case QCOM_TEE_OBJECT_TYPE_ROOT:
+ default:
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+/**
+ * qcom_tee_params_to_args() - Convert TEE parameters to QTEE arguments in a context.
+ * @u: QTEE arguments.
+ * @params: TEE parameters.
+ * @num_params: number of elements in the parameter array.
+ * @ctx: context in which the conversion should happen.
+ *
+ * It assumes @u has at least @num_param + 1 entries and has been initialized
+ * with %QCOM_TEE_ARG_TYPE_INV as &struct qcom_tee_arg.type.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+static int qcom_tee_params_to_args(struct qcom_tee_arg *u,
+ struct tee_param *params, int num_params,
+ struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_object *object;
+ int i;
+
+ for (i = 0; i < num_params; i++) {
+ switch (params[i].attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_INPUT:
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_OUTPUT:
+ u[i].flags = QCOM_TEE_ARG_FLAGS_UADDR;
+ u[i].b.uaddr = params[i].u.membuf.uaddr;
+ u[i].b.size = params[i].u.membuf.size;
+
+ if (params[i].attr == TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_INPUT)
+ u[i].type = QCOM_TEE_ARG_TYPE_IB;
+ else /* TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_OUTPUT */
+ u[i].type = QCOM_TEE_ARG_TYPE_OB;
+
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT:
+ u[i].type = QCOM_TEE_ARG_TYPE_IO;
+ if (qcom_tee_objref_to_arg(&u[i], ¶ms[i], ctx))
+ goto out_failed;
+
+ break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT:
+ u[i].type = QCOM_TEE_ARG_TYPE_OO;
+ u[i].o = NULL_QCOM_TEE_OBJECT;
+ break;
+ default: /* Unsupported TEE parameters. */
+ goto out_failed;
+ }
+ }
+
+ return 0;
+
+out_failed:
+
+ /* On ERROR: */
+ /* Put IO objects processed so far. */
+ for (--i; i >= 0; i--) {
+ if (u[i].type != QCOM_TEE_ARG_TYPE_IO)
+ continue;
+
+ object = u[i].o;
+ qcom_tee_user_object_set_notify(object, false);
+ /* For callback object, we hold a reference for the driver, put it. */
+ if (typeof_qcom_tee_object(object) == QCOM_TEE_OBJECT_TYPE_CB_OBJECT)
+ qcom_tee_object_put(object);
+ /* Put QTEE copy of object. */
+ qcom_tee_object_put(object);
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * qcom_tee_params_from_args() - Convert QTEE arguments to TEE parameters in a context.
+ * @params: TEE parameters.
+ * @u: QTEE arguments.
+ * @num_params: number of elements in the parameter array.
+ * @ctx: context in which the conversion should happen.
+ *
+ * @u should have been already initialized by qcom_tee_params_to_args().
+ * This also represents end of a QTEE invocation that started with qcom_tee_params_to_args()
+ * by releasing %QCOM_TEE_ARG_TYPE_IO objects.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+static int qcom_tee_params_from_args(struct tee_param *params,
+ struct qcom_tee_arg *u, int num_params,
+ struct qcom_tee_context *ctx)
+{
+ int i, np;
+
+ for (np = 0; u[np].type; np++) {
+ enum qcom_tee_arg_type at = u[np].type;
+
+ if (at == QCOM_TEE_ARG_TYPE_OB) {
+ /* TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_OUTPUT */
+ params[np].u.value.b = u[np].b.size;
+
+ } else if (at == QCOM_TEE_ARG_TYPE_IO) {
+ /* IEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT */
+ qcom_tee_object_put(u[np].o);
+
+ } else if (at == QCOM_TEE_ARG_TYPE_OO) {
+ /* TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT */
+ if (qcom_tee_objref_from_arg(¶ms[np], &u[np], ctx))
+ goto out_failed;
+ }
+ }
+
+ return 0;
+
+out_failed:
+
+ /* On ERROR: */
+ /* - Release params associated to QTEE objects in this context so far. */
+ for (i = 0; i < np; i++) {
+ if (params[i].attr == TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT)
+ qcom_tee_context_del_qtee_object(¶ms[i], ctx);
+ }
+ /* - Release any IO and OO objects not processed so far. */
+ while (u[i].type) {
+ if (u[i].type == QCOM_TEE_ARG_TYPE_OO ||
+ u[i].type == QCOM_TEE_ARG_TYPE_IO)
+ qcom_tee_object_put(u[i++].o);
+ }
+
+ return -EINVAL;
+}
+
+/* TEE Device Ops. */
+
+static int qcom_tee_params_check(struct tee_param *params, int num_params)
+{
+ int io = 0, oo = 0, ib = 0, ob = 0;
+ int i;
+
+ /* QTEE accepts 64 arguments. */
+ if (num_params > QCOM_TEE_ARGS_MAX)
+ return -EINVAL;
+
+ /* Supported parameter types. */
+ for (i = 0; i < num_params; i++) {
+ switch (params[i].attr) {
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_INPUT:
+ ib++; break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_OUTPUT:
+ ob++; break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT:
+ io++; break;
+ case TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT:
+ oo++; break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ /* QTEE accepts 16 arguments of each supported types. */
+ if (io > QCOM_TEE_ARGS_PER_TYPE || oo > QCOM_TEE_ARGS_PER_TYPE ||
+ ib > QCOM_TEE_ARGS_PER_TYPE || ob > QCOM_TEE_ARGS_PER_TYPE)
+ return -EINVAL;
+
+ return 0;
+}
+
+/* Check if user issued a permitted operation on ROOT_QCOM_TEE_OBJECT from userspace. */
+static int qcom_tee_root_object_check(u32 op, struct tee_param *params, int num_params)
+{
+ /* Some privileged operations recognized by QTEE. */
+ if (op == 4 || op == 8 || op == 9)
+ return -EINVAL;
+
+ /* OP 5 is to register with QTEE by passing credential object as input OBJREF. */
+ /* TEE_OBJREF_NULL as credential object represents a privileged client for QTEE,
+ * only kernel can pass TEE_OBJREF_NULL.
+ */
+ if (op == 5) {
+ if (num_params != 2)
+ return -EINVAL;
+
+ if (params[0].attr == TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT &&
+ params[1].attr == TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT) {
+ if (params[0].u.objref.id == TEE_OBJREF_NULL)
+ return -EINVAL;
+
+ } else if (params[0].attr == TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT &&
+ params[1].attr == TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT) {
+ if (params[1].u.objref.id == TEE_OBJREF_NULL)
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * qcom_tee_object_invoke() - Invoke a QTEE object.
+ * @tee_ctx: TEE context.
+ * @arg: ioctl arguments.
+ * @params: parameters for the object.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+static int qcom_tee_object_invoke(struct tee_context *tee_ctx,
+ struct tee_ioctl_object_invoke_arg *arg,
+ struct tee_param *params)
+{
+ struct qcom_tee_object_invoke_ctx *oic __free(kfree) = NULL;
+ struct qcom_tee_context *ctx = tee_ctx->data;
+ struct qcom_tee_arg *u __free(kfree) = NULL;
+ struct qcom_tee_object *object;
+ int i, ret, result;
+
+ if (qcom_tee_params_check(params, arg->num_params))
+ return -EINVAL;
+
+ /* Handle OBJREF reserved operations. */
+ if (arg->op == QCOM_TEE_OBJREF_OP_RELEASE) {
+ del_qtee_object(arg->object, ctx);
+
+ return 0;
+ }
+
+ /* Unsupported reserved operation. */
+ if (arg->op > QCOM_TEE_OBJREF_OP_MIN)
+ return -EINVAL;
+
+ oic = kzalloc(sizeof(*oic), GFP_KERNEL);
+ if (!oic)
+ return -ENOMEM;
+
+ /* +1 for ending QCOM_TEE_ARG_TYPE_INV. */
+ u = kzalloc(sizeof(*u) * (arg->num_params + 1), GFP_KERNEL);
+ if (!u)
+ return -ENOMEM;
+
+ if (arg->object == TEE_OBJREF_NULL &&
+ !qcom_tee_root_object_check(arg->op, params, arg->num_params)) {
+ /* Use ROOT if NULL is invoked. */
+ object = ROOT_QCOM_TEE_OBJECT;
+ } else {
+ /* Get object being invoked. */
+ ret = find_qtee_object(&object, arg->object, ctx);
+ if (ret)
+ return ret;
+ }
+
+ ret = qcom_tee_params_to_args(u, params, arg->num_params, ctx);
+ if (ret)
+ goto out;
+
+ ret = qcom_tee_object_do_invoke(oic, object, arg->op, u, &result);
+ if (!ret) {
+ if (!result) {
+ /* Only parse QTEE response on SUCCESS. */
+ ret = qcom_tee_params_from_args(params, u, arg->num_params, ctx);
+ } else {
+ /* Put driver's IO objects copy; get in qcom_tee_params_to_args(). */
+ qcom_tee_arg_for_each_input_object(i, u)
+ qcom_tee_object_put(u[i++].o);
+ }
+ } else if (ret != -EAGAIN && ret != -ENODEV) {
+ /* Unable to initiate a QTEE invocation; cleanup qcom_tee_params_to_args(). */
+ qcom_tee_arg_for_each_input_object(i, u) {
+ qcom_tee_user_object_set_notify(u[i].o, false);
+ if (typeof_qcom_tee_object(u[i].o) == QCOM_TEE_OBJECT_TYPE_CB_OBJECT)
+ qcom_tee_object_put(u[i].o);
+ qcom_tee_object_put(u[i].o);
+ }
+ }
+
+ arg->ret = result;
+out:
+ qcom_tee_object_put(object);
+
+ return ret;
+}
+
+/**
+ * qcom_tee_supp_recv() - Pick a request for the supplicant.
+ * @tee_ctx: TEE context.
+ * @op: requested operation on object.
+ * @num_params: number of elements in the parameter array, updated with number used.
+ * @params: parameters for @op.
+ *
+ * The first parameter is a %TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT meta parameter.
+ * On input, it provides a user buffer. This buffer is used for parameters of type
+ * %TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_INPUT in qcom_tee_cb_params_from_args().
+ * On output, object id and request id are stored in the meta parameter.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+static int qcom_tee_supp_recv(struct tee_context *tee_ctx, u32 *op, u32 *num_params,
+ struct tee_param *params)
+{
+ struct qcom_tee_user_object_request_data data;
+ struct qcom_tee_context *ctx = tee_ctx->data;
+ void __user *uaddr;
+ size_t ubuf_size;
+ int i, ret;
+
+ if (!*num_params)
+ return -EINVAL;
+
+ /* We expect the first parameter to be an INOUT + meta parameter. */
+ if (params->attr != (TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT | TEE_IOCTL_PARAM_ATTR_META))
+ return -EINVAL;
+
+ /* Others parameters are none. */
+ for (i = 1; i < *num_params; i++)
+ if (params[i].attr)
+ return -EINVAL;
+
+ if (IS_ALIGNED(params->u.value.a, 8))
+ return -EINVAL;
+
+ /* User buffer and size from meta parameter. */
+ uaddr = u64_to_user_ptr(params->u.value.a);
+ ubuf_size = params->u.value.b;
+ /* Process TEE parameters. +/-1 to ignore meta parameter. */
+ ret = qcom_tee_user_object_pop(ctx, params + 1, *num_params - 1, uaddr, ubuf_size, &data);
+ if (ret)
+ return ret;
+
+ params->u.value.a = data.object_id;
+ params->u.value.b = data.id;
+ params->u.value.c = 0;
+ *op = data.op;
+ *num_params = data.np + 1;
+
+ return 0;
+}
+
+/**
+ * qcom_tee_supp_send() - Pick a request for the supplicant.
+ * @tee_ctx: TEE context.
+ * @ret: return value of the request.
+ * @num_params: number of elements in the parameter array.
+ * @params: returned parameters.
+ *
+ * The first parameter is a %TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT meta parameter.
+ * It specifies the request id this response is belong to.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+static int qcom_tee_supp_send(struct tee_context *tee_ctx, u32 errno, u32 num_params,
+ struct tee_param *params)
+{
+ struct qcom_tee_context *ctx = tee_ctx->data;
+ int id;
+
+ if (!num_params)
+ return -EINVAL;
+
+ /* We expect the first parameter to be an INPUT + meta parameter. */
+ if (params->attr != (TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT | TEE_IOCTL_PARAM_ATTR_META))
+ return -EINVAL;
+
+ /* Get the req_id of response. */
+ id = params->u.value.a;
+
+ /* Process TEE parameters. +/-1 to ignore meta parameter. */
+ return qcom_tee_user_object_submit(ctx, params + 1, num_params - 1, id, errno);
+}
+
+static int qcom_tee_open(struct tee_context *tee_context)
+{
+ struct qcom_tee_context *ctx __free(kfree) = NULL;
+ int err;
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ err = init_srcu_struct(&ctx->req_srcu);
+ if (err)
+ return err;
+
+ ctx->tee_context = tee_context;
+ idr_init(&ctx->qtee_objects_idr);
+ idr_init(&ctx->reqs_idr);
+ mutex_init(&ctx->lock);
+ init_completion(&ctx->req_c);
+ kref_init(&ctx->ref_cnt);
+
+ tee_context->data = no_free_ptr(ctx);
+
+ return 0;
+}
+
+static void qcom_tee_release(struct tee_context *tee_context)
+{
+ struct qcom_tee_context *ctx = tee_context->data;
+ struct qcom_tee_object *object;
+ int id;
+
+ /* Process QUEUED or PROCESSING requests. */
+ qcom_tee_requests_destroy(ctx);
+
+ /* Release QTEE objects. */
+ idr_for_each_entry(&ctx->qtee_objects_idr, object, id)
+ qcom_tee_object_put(object);
+
+ /* Put the context; wait for all user objects to go away. */
+ kref_put(&ctx->ref_cnt, __qcom_tee_context_destroy);
+}
+
+void __qcom_tee_context_destroy(struct kref *ref_cnt)
+{
+ struct qcom_tee_context *ctx = container_of(ref_cnt, struct qcom_tee_context, ref_cnt);
+
+ idr_destroy(&ctx->qtee_objects_idr);
+ idr_destroy(&ctx->reqs_idr);
+ cleanup_srcu_struct(&ctx->req_srcu);
+ kfree(ctx);
+}
+
+static void qcom_tee_get_version(struct tee_device *teedev, struct tee_ioctl_version_data *vers)
+{
+ struct tee_ioctl_version_data v = {
+ .impl_id = TEE_IMPL_ID_QTEE,
+ .gen_caps = TEE_GEN_CAP_OBJREF,
+ };
+
+ *vers = v;
+}
+
+static const struct tee_driver_ops qcom_tee_ops = {
+ .get_version = qcom_tee_get_version,
+ .open = qcom_tee_open,
+ .release = qcom_tee_release,
+ .object_invoke_func = qcom_tee_object_invoke,
+ .supp_recv = qcom_tee_supp_recv,
+ .supp_send = qcom_tee_supp_send,
+};
+
+static const struct tee_desc qcom_tee_desc = {
+ .name = "qcom_tee",
+ .ops = &qcom_tee_ops,
+ .owner = THIS_MODULE,
+};
+
+static int qcom_tee_probe(struct platform_device *pdev)
+{
+ struct tee_device *teedev;
+ int err;
+
+ if (!qcom_scm_is_available())
+ return -EPROBE_DEFER;
+
+ teedev = tee_device_alloc(&qcom_tee_desc, NULL, NULL, NULL);
+ if (IS_ERR(teedev))
+ return PTR_ERR(teedev);
+
+ err = tee_device_register(teedev);
+ if (err)
+ goto err_unreg_teedev;
+
+ platform_set_drvdata(pdev, teedev);
+ return 0;
+
+err_unreg_teedev:
+ tee_device_unregister(teedev);
+
+ return err;
+}
+
+static void qcom_tee_remove(struct platform_device *pdev)
+{
+ struct tee_device *teedev = platform_get_drvdata(pdev);
+
+ /* Keep a copy, tee_device_unregister() sets it to NULL. */
+ struct tee_shm_pool *pool = teedev->pool;
+
+ /* Wait for users to go away. */
+ tee_device_unregister(teedev);
+ tee_shm_pool_free(pool);
+}
+
+static const struct of_device_id qcom_tee_dt_match[] = {
+ { .compatible = "qcom,tee" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qcom_tee_dt_match);
+
+static struct platform_driver qcom_tee_platform_driver = {
+ .probe = qcom_tee_probe,
+ .remove = qcom_tee_remove,
+ .driver = {
+ .name = "qcom_tee",
+ .of_match_table = qcom_tee_dt_match,
+ },
+};
+
+int qcom_tee_driver_register(void)
+{
+ return platform_driver_register(&qcom_tee_platform_driver);
+}
+
+void qcom_tee_driver_unregister(void)
+{
+ platform_driver_unregister(&qcom_tee_platform_driver);
+}
@@ -904,8 +904,14 @@ static int __init qcom_tee_object_invoke_init(void)
if (ret)
goto err_kobject_put;
+ ret = qcom_tee_driver_register();
+ if (ret)
+ goto err_remove_group;
+
return 0;
+err_remove_group:
+ sysfs_remove_group(qcom_tee_object_invoke_kobj, &attr_group);
err_kobject_put:
/* Remove '/sys/firmware/qcom_tee'. */
kobject_put(qcom_tee_object_invoke_kobj);
@@ -920,6 +926,8 @@ module_init(qcom_tee_object_invoke_init);
static void __exit qcom_tee_object_invoke_deinit(void)
{
+ qcom_tee_driver_unregister();
+
/* Wait for RELEASE operations for QTEE objects. */
qcom_tee_release_destroy();
qcom_tee_msg_buffers_destroy();
@@ -10,6 +10,14 @@
#include <linux/kobject.h>
#include <linux/tee_core.h>
+/* Flags relating to object reference. */
+#define QCOM_TEE_OBJREF_FLAG_USER 1
+
+/* Reserved OBJREF operations. */
+/* These operations are not sent to QTEE and handled in driver. */
+#define QCOM_TEE_OBJREF_OP_MIN USHRT_MAX
+#define QCOM_TEE_OBJREF_OP_RELEASE (QCOM_TEE_OBJREF_OP_MIN + 1)
+
struct qcom_tee_object *qcom_tee_idx_erase(u32 idx);
void qcom_tee_object_free(struct qcom_tee_object *object);
@@ -44,9 +52,167 @@ int __qcom_tee_object_do_invoke(struct qcom_tee_object_invoke_ctx *oic,
struct qcom_tee_object *object, u32 op, struct qcom_tee_arg *u,
int *result);
+/**
+ * struct qcom_tee_context - Clients or supplicants context.
+ * @tee_context: TEE context.
+ * @qtee_objects_idr: QTEE objects in this context.
+ * @reqs_idr: Requests currently being processed.
+ * @lock: mutex for @reqs_idr and @qtee_objects_idr.
+ * @req_srcu: srcu for exclusive access to requests.
+ * @req_c: completion used when supplicant is waiting for requests.
+ * @released: state of this context.
+ * @ref_cnt: ref count.
+ */
+struct qcom_tee_context {
+ struct tee_context *tee_context;
+
+ struct idr qtee_objects_idr;
+ struct idr reqs_idr;
+ /* Synchronize access to @reqs_idr, @qtee_objects_idr and updating requests state. */
+ struct mutex lock;
+ struct srcu_struct req_srcu;
+ struct completion req_c;
+
+ int released;
+
+ struct kref ref_cnt;
+};
+
+void __qcom_tee_context_destroy(struct kref *ref_cnt);
+
+/* qcom_tee_context_add_qtee_object() - Add a QTEE object to the context.
+ * @param: TEE parameter represents @object.
+ * @object: QTEE object.
+ * @ctx: context to add the object.
+ *
+ * It assumes @object is %QCOM_TEE_OBJECT_TYPE_TEE and caller has already issued
+ * qcom_tee_object_get() for @object.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_context_add_qtee_object(struct tee_param *param, struct qcom_tee_object *object,
+ struct qcom_tee_context *ctx);
+
+/* Get the QTEE object added with qcom_tee_context_add_qtee_object(). */
+int qcom_tee_context_find_qtee_object(struct qcom_tee_object **object, struct tee_param *param,
+ struct qcom_tee_context *ctx);
+
+/**
+ * qcom_tee_context_del_qtee_object() - Delete a QTEE object from the context.
+ * @param: TEE parameter represents @object.
+ * @ctx: context to delete the object.
+ *
+ * @param returned by qcom_tee_context_add_qtee_object().
+ */
+void qcom_tee_context_del_qtee_object(struct tee_param *param, struct qcom_tee_context *ctx);
+
+/**
+ * qcom_tee_objref_to_arg() - Convert OBJREF parameter to QTEE argument in a context.
+ * @arg: QTEE argument.
+ * @param: TEE parameter.
+ * @ctx: context in which the conversion should happen.
+ *
+ * It assumes @param is OBJREF.
+ * It does not set @arg.type; caller should initialize it to a correct
+ * &enum qcom_tee_arg_type value.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_objref_to_arg(struct qcom_tee_arg *arg, struct tee_param *param,
+ struct qcom_tee_context *ctx);
+
+/**
+ * qcom_tee_objref_from_arg() - Convert QTEE argument to OBJREF param in a context.
+ * @param: TEE parameter.
+ * @arg: QTEE argument.
+ * @ctx: context in which the conversion should happen.
+ *
+ * It assumes @arg is of %QCOM_TEE_ARG_TYPE_IO or %QCOM_TEE_ARG_TYPE_OO.
+ * It does not set @param.attr; caller should initialize it to a correct OBJREF type.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_objref_from_arg(struct tee_param *param, struct qcom_tee_arg *arg,
+ struct qcom_tee_context *ctx);
+
+int qcom_tee_driver_register(void);
+void qcom_tee_driver_unregister(void);
+
/* OBJECTS: */
/* (1) Primordial Object. */
extern struct qcom_tee_object qcom_tee_primordial_object;
+/* (2) User Object API. */
+
+/* Is it a user object? */
+int is_qcom_tee_user_object(struct qcom_tee_object *object);
+
+/* Set user object's 'notify on release' flag. */
+void qcom_tee_user_object_set_notify(struct qcom_tee_object *object, bool notify);
+
+/**
+ * qcom_tee_user_param_to_object() - Convert OBJREF parameter to &struct qcom_tee_object.
+ * @object: object returned.
+ * @param: TEE parameter.
+ * @ctx: context in which the conversion should happen.
+ *
+ * @param is OBJREF with %TEE_IOCTL_OBJREF_USER flags.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_user_param_to_object(struct qcom_tee_object **object, struct tee_param *param,
+ struct qcom_tee_context *ctx);
+
+/* Reverse what qcom_tee_user_param_to_object() does. */
+int qcom_tee_user_param_from_object(struct tee_param *param, struct qcom_tee_object *object,
+ struct qcom_tee_context *ctx);
+
+struct qcom_tee_user_object_request_data {
+ int id; /* Id assigned to the request. */
+ u64 object_id; /* Object id being invoked by QTEE. */
+ u32 op; /* Requested operation on object. */
+ int np; /* Number of parameters in the request.*/
+};
+
+/**
+ * qcom_tee_user_object_pop() - Pop a request for a user object.
+ * @ctx: context to look for user object.
+ * @params: parameters for @op.
+ * @num_params: number of elements in the parameter array.
+ * @uaddr: user buffer for output MEMBUF parameters.
+ * @size: size of user buffer @uaddr.
+ * @data: information for the pop request.
+ *
+ * @params is filled along with @data for the picked request.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_user_object_pop(struct qcom_tee_context *ctx,
+ struct tee_param *params, int num_params,
+ void __user *uaddr, size_t size,
+ struct qcom_tee_user_object_request_data *data);
+
+/**
+ * qcom_tee_user_object_submit() - Submit a response for a user object.
+ * @ctx: context to look for user object.
+ * @params: returned parameters.
+ * @num_params: number of elements in the parameter array.
+ * @id: request id for the response.
+ * @errno: result of user object invocation.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_user_object_submit(struct qcom_tee_context *ctx,
+ struct tee_param *params, int num_params, int id, int errno);
+
+/**
+ * qcom_tee_requests_destroy() - Destroy requests in a context.
+ * @ctx: context for which to destroy requests.
+ *
+ * After calling qcom_tee_requests_destroy(), @ctx can not be reused.
+ * It should be called on @ctx cleanup path.
+ */
+void qcom_tee_requests_destroy(struct qcom_tee_context *ctx);
+
#endif /* QCOM_TEE_PRIVATE_H */
new file mode 100644
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "qcomtee_private.h"
+
+/**
+ * DOC: User Objects aka Supplicants
+ *
+ * Any userspace process with access to the TEE device file can behave as a supplicant
+ * by creating a user object. Any TEE parameter of type OBJREF with %QCOM_TEE_OBJREF_FLAG_USER
+ * flag set is considered as user object.
+ *
+ * A supplicant uses qcom_tee_user_object_pick() (i.e. TEE_IOC_SUPPL_RECV) to receive a
+ * QTEE user object request and qcom_tee_user_object_submit() (i.e. TEE_IOC_SUPPL_SEND)
+ * to submit a response. QTEE expects to receive the response, including OB and OO in
+ * specific order in the message; parameters submitted with qcom_tee_user_object_submit()
+ * should maintain this order.
+ */
+
+/**
+ * struct qcom_tee_user_object - User object.
+ * @object: &struct qcom_tee_object representing this user object.
+ * @ctx: context for which user object is defined.
+ * @object_id: object ID in @ctx.
+ * @nor: notify userspace if object is released.
+ *
+ * Any object managed in userspace is represented with this struct.
+ * If @nor is set, on release a notification message is send back to the userspace.
+ */
+struct qcom_tee_user_object {
+ struct qcom_tee_object object;
+ struct qcom_tee_context *ctx;
+ u64 object_id;
+
+ bool nor;
+};
+
+#define to_qcom_tee_user_object(o) container_of((o), struct qcom_tee_user_object, object)
+
+static struct qcom_tee_object_operations qcom_tee_user_object_ops;
+
+/* Is it a user object? */
+int is_qcom_tee_user_object(struct qcom_tee_object *object)
+{
+ return object != NULL_QCOM_TEE_OBJECT &&
+ typeof_qcom_tee_object(object) == QCOM_TEE_OBJECT_TYPE_CB_OBJECT &&
+ object->ops == &qcom_tee_user_object_ops;
+}
+
+/* Set user object's 'notify on release' flag. */
+void qcom_tee_user_object_set_notify(struct qcom_tee_object *object, bool notify)
+{
+ if (is_qcom_tee_user_object(object))
+ WRITE_ONCE(to_qcom_tee_user_object(object)->nor, notify);
+}
+
+/**
+ * enum qcom_tee_req_state - Current state of request.
+ * @QCOM_TEE_REQ_QUEUED: Request is waiting for supplicant.
+ * @QCOM_TEE_REQ_PROCESSING: Request has been picked by the supplicant.
+ * @QCOM_TEE_REQ_PROCESSED: Response has been submitted for the request.
+ */
+enum qcom_tee_req_state {
+ QCOM_TEE_REQ_QUEUED = 1,
+ QCOM_TEE_REQ_PROCESSING,
+ QCOM_TEE_REQ_PROCESSED,
+};
+
+/* User requests sent to supplicants. */
+struct qcom_tee_user_req {
+ enum qcom_tee_req_state state;
+
+ int req_id; /* Request ID. */
+ u64 object_id; /* User object ID. */
+ u32 op; /* Operation to perform on object. */
+ struct qcom_tee_arg *args; /* QTEE arguments for this operation. */
+ int errno; /* Result of operation. */
+
+ struct completion c; /* Completion for whoever wait for results. */
+};
+
+/* Static placeholder for a request in PROCESSING state in qcom_tee_context.reqs_idr.
+ * If the thread initiated the QTEE call using qcom_tee_object_invoke() dies, and supplicant
+ * is processing the request, we replace the entry in qcom_tee_context.reqs_idr with
+ * __empty_ureq. So (1) the req_id remains busy and not reused, and (2) supplicant fails to
+ * submit response and does the necessary rollback.
+ */
+static struct qcom_tee_user_req __empty_ureq = { .state = QCOM_TEE_REQ_PROCESSING };
+
+/* Enqueue a user request for a context. */
+static int qcom_tee_request_enqueue(struct qcom_tee_user_req *ureq, struct qcom_tee_context *ctx)
+{
+ int ret;
+
+ guard(mutex)(&ctx->lock);
+ /* Supplicant is dying. */
+ if (ctx->released)
+ return -ENODEV;
+
+ ret = idr_alloc(&ctx->reqs_idr, ureq, 0, 0, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+
+ ureq->req_id = ret;
+ ureq->state = QCOM_TEE_REQ_QUEUED;
+
+ return 0;
+}
+
+/**
+ * qcom_tee_requests_destroy() - Destroy requests in a context.
+ * @ctx: context for which to destroy requests.
+ */
+void qcom_tee_requests_destroy(struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_user_req *ureq;
+ int id;
+
+ guard(mutex)(&ctx->lock);
+
+ /* So qcom_tee_request_enqueue() refuses new requests. */
+ ctx->released = 1;
+ idr_for_each_entry(&ctx->reqs_idr, ureq, id) {
+ if (ureq == &__empty_ureq)
+ continue;
+ /* ureq in QUEUED or PROCESSING state, terminate them. */
+ if (ureq->op == QCOM_TEE_OBJREF_OP_RELEASE) {
+ kfree(ureq);
+ } else {
+ ureq->state = QCOM_TEE_REQ_PROCESSED;
+ ureq->errno = -ENODEV;
+ complete(&ureq->c);
+ }
+ }
+}
+
+/**
+ * qcom_tee_supp_pop_entry() - Pop the next request in a context.
+ * @ctx: context from which to pop a request.
+ * @ubuf_size: size of available buffer for MEMBUF parameters.
+ * @num_params: number of entries for TEE parameter array.
+ *
+ * It does not remove the request from &qcom_tee_context.reqs_idr.
+ * It checks if @num_params is large enough to fit the next request arguments.
+ * It checks if @ubuf_size is large enough to fit IB buffer arguments from QTEE.
+ * It updates request state to %QCOM_TEE_REQ_PROCESSING state.
+ *
+ * Return: On success return a request or NULL and ERR_PTR on failure.
+ */
+static struct qcom_tee_user_req *qcom_tee_supp_pop_entry(struct qcom_tee_context *ctx,
+ size_t ubuf_size, int num_params)
+{
+ struct qcom_tee_user_req *ureq;
+ struct qcom_tee_arg *u;
+ int i, id;
+
+ guard(mutex)(&ctx->lock);
+
+ /* Find the a QUEUED request. */
+ idr_for_each_entry(&ctx->reqs_idr, ureq, id)
+ if (ureq->state == QCOM_TEE_REQ_QUEUED)
+ break;
+
+ if (!ureq)
+ return NULL;
+
+ u = ureq->args;
+ /* (1) Is there enough TEE parameters? */
+ if (num_params < qcom_tee_args_len(u))
+ return ERR_PTR(-EINVAL);
+
+ /* (2) Is there enough space to pass input buffers? */
+ qcom_tee_arg_for_each_input_buffer(i, u) {
+ ubuf_size = size_sub(ubuf_size, u[i].b.size);
+ if (ubuf_size == SIZE_MAX)
+ return ERR_PTR(-EINVAL);
+
+ ubuf_size = round_down(ubuf_size, 8);
+ }
+
+ /* Ready to process request 'QUEUED -> PROCESSING'. */
+ ureq->state = QCOM_TEE_REQ_PROCESSING;
+
+ return ureq;
+}
+
+/* User object dispatcher. */
+static int qcom_tee_user_object_dispatch(struct qcom_tee_object_invoke_ctx *oic,
+ struct qcom_tee_object *object, u32 op,
+ struct qcom_tee_arg *args)
+{
+ struct qcom_tee_user_object *uo = to_qcom_tee_user_object(object);
+ struct qcom_tee_user_req *ureq __free(kfree);
+ struct qcom_tee_context *ctx = uo->ctx;
+ int errno;
+
+ ureq = kzalloc(sizeof(*ureq), GFP_KERNEL);
+ if (!ureq)
+ return -ENOMEM;
+
+ init_completion(&ureq->c);
+ ureq->object_id = uo->object_id;
+ ureq->op = op;
+ ureq->args = args;
+
+ /* Queue the request. */
+ if (qcom_tee_request_enqueue(ureq, ctx))
+ return -ENODEV;
+
+ /* Wakeup supplicant to process it. */
+ complete(&ctx->req_c);
+
+ /* Wait for supplicant to process the request. */
+ /* Supplicant is expected to process request in a timely manner. We wait as KILLABLE,
+ * in case supplicant and invoke thread both running from a same user process, otherwise
+ * the process stuck on fatal signal.
+ */
+ if (!wait_for_completion_state(&ureq->c, TASK_KILLABLE | TASK_FREEZABLE)) {
+ errno = ureq->errno;
+ /* On SUCCESS, end_cb_notify frees the request. */
+ if (!errno)
+ oic->data = no_free_ptr(ureq);
+ } else {
+ enum qcom_tee_req_state prev_state;
+
+ errno = -ENODEV;
+
+ scoped_guard(mutex, &ctx->lock) {
+ prev_state = ureq->state;
+ /* Replace ureq with '__empty_ureq' to keep req_id reserved. */
+ if (prev_state == QCOM_TEE_REQ_PROCESSING)
+ idr_replace(&ctx->reqs_idr, &__empty_ureq, ureq->req_id);
+ /* Remove ureq as supplicant has never seen this request. */
+ else if (prev_state == QCOM_TEE_REQ_QUEUED)
+ idr_remove(&ctx->reqs_idr, ureq->req_id);
+ }
+
+ /* Wait for exclusive access to ureq. */
+ synchronize_srcu(&ctx->req_srcu);
+
+ /* Supplicant did some work for us, we should not discard it. */
+ if (prev_state == QCOM_TEE_REQ_PROCESSED) {
+ errno = ureq->errno;
+ /* On SUCCESS, end_cb_notify frees the request. */
+ if (!errno)
+ oic->data = no_free_ptr(ureq);
+ }
+ }
+
+ return errno;
+}
+
+/* Called after submitting the callback response. */
+static void qcom_tee_user_object_end_cb_notify(struct qcom_tee_object_invoke_ctx *oic,
+ struct qcom_tee_object *unused_object, int err)
+{
+ struct qcom_tee_user_req *ureq = oic->data;
+ struct qcom_tee_arg *u = ureq->args;
+ struct qcom_tee_object *object;
+ int i;
+
+ qcom_tee_arg_for_each_output_object(i, u) {
+ object = u[i].o;
+ /* If err, drop QTEE copy otherwise just drop driver's copy. */
+ if (err && (typeof_qcom_tee_object(object) == QCOM_TEE_OBJECT_TYPE_CB_OBJECT))
+ qcom_tee_object_put(object);
+ qcom_tee_object_put(object);
+ }
+
+ kfree(ureq);
+}
+
+static void qcom_tee_user_object_release(struct qcom_tee_object *object)
+{
+ struct qcom_tee_user_object *uo = to_qcom_tee_user_object(object);
+ struct qcom_tee_context *ctx = uo->ctx;
+ struct qcom_tee_user_req *ureq;
+
+ static struct qcom_tee_arg args[] = { { .type = QCOM_TEE_ARG_TYPE_INV } };
+
+ if (READ_ONCE(uo->nor)) {
+ ureq = kzalloc(sizeof(*ureq), GFP_KERNEL);
+ if (ureq) {
+ ureq->object_id = uo->object_id;
+ ureq->op = QCOM_TEE_OBJREF_OP_RELEASE;
+ ureq->args = args;
+
+ /* Queue the RELEASE request and wake supplicant to process it. */
+ qcom_tee_request_enqueue(ureq, ctx);
+
+ complete(&ctx->req_c);
+ } else {
+ pr_err("failed to notify user object (%s) release.\n",
+ qcom_tee_object_name(object));
+ }
+ }
+
+ /* Matching get is in qcom_tee_user_param_to_object(). */
+ kref_put(&ctx->ref_cnt, __qcom_tee_context_destroy);
+ kfree(uo);
+}
+
+static struct qcom_tee_object_operations qcom_tee_user_object_ops = {
+ .release = qcom_tee_user_object_release,
+ .notify = qcom_tee_user_object_end_cb_notify,
+ .dispatch = qcom_tee_user_object_dispatch,
+};
+
+/**
+ * qcom_tee_user_param_to_object() - Convert OBJREF parameter to &struct qcom_tee_object.
+ * @object: object returned.
+ * @param: TEE parameter.
+ * @ctx: context in which the conversion should happen.
+ *
+ * @param is OBJREF with %QCOM_TEE_OBJREF_FLAG_USER flags.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_user_param_to_object(struct qcom_tee_object **object, struct tee_param *param,
+ struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_user_object *user_object __free(kfree) = NULL;
+ struct qcom_tee_object *uo;
+ int err;
+
+ user_object = kzalloc(sizeof(*user_object), GFP_KERNEL);
+ if (!user_object)
+ return -ENOMEM;
+
+ user_object->ctx = ctx;
+ user_object->object_id = param->u.objref.id;
+ /* By default, always notify userspace on release. */
+ user_object->nor = true;
+
+ err = qcom_tee_object_user_init(&user_object->object, QCOM_TEE_OBJECT_TYPE_CB_OBJECT,
+ &qcom_tee_user_object_ops, "uo-%lu", param->u.objref.id);
+ if (err)
+ return err;
+
+ uo = &no_free_ptr(user_object)->object;
+ /* Keep context alive as user object is alive. */
+ kref_get(&ctx->ref_cnt);
+
+ *object = uo;
+
+ return 0;
+}
+
+/* Reverse what qcom_tee_user_param_to_object() does. */
+int qcom_tee_user_param_from_object(struct tee_param *param, struct qcom_tee_object *object,
+ struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_user_object *uo;
+
+ if (!is_qcom_tee_user_object(object))
+ return -EINVAL;
+
+ uo = to_qcom_tee_user_object(object);
+ /* Sure if the object is in a same context as caller? */
+ if (uo->ctx != ctx)
+ return -EINVAL;
+
+ param->u.objref.id = uo->object_id;
+ param->u.objref.flags = QCOM_TEE_OBJREF_FLAG_USER;
+
+ /* User objects are valid in the context of userspace; drop the driver copy. */
+ qcom_tee_object_put(object);
+
+ return 0;
+}
+
+/**
+ * qcom_tee_cb_params_from_args() - Convert QTEE arguments to TEE parameters in a context.
+ * @params: TEE parameters.
+ * @u: QTEE arguments.
+ * @num_params: number of elements in the parameter array.
+ * @ubuf_addr: user buffer for argument of type %QCOM_TEE_ARG_TYPE_IB.
+ * @ubuf_size: size of user buffer.
+ * @ctx: context in which the conversion should happen.
+ *
+ * It expects @params to have enough entries for @u. Entries in @params are of
+ * %TEE_IOCTL_PARAM_ATTR_TYPE_NONE. On failure, it puts IO objects.
+ *
+ * Return: On success return number of input parameters processed or <0 on failure.
+ */
+static int qcom_tee_cb_params_from_args(struct tee_param *params,
+ struct qcom_tee_arg *u, int num_params,
+ void __user *ubuf_addr, size_t ubuf_size,
+ struct qcom_tee_context *ctx)
+{
+ int i, np = 0;
+
+ qcom_tee_arg_for_each(i, u) {
+ enum qcom_tee_arg_type at = u[i].type;
+
+ if (at == QCOM_TEE_ARG_TYPE_IB) {
+ params[np].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_INPUT;
+
+ /* Underflow already checked in qcom_tee_supp_pop_entry(). */
+ ubuf_size = round_down(ubuf_size - u[i].b.size, 8);
+ params[np].u.membuf.uaddr = (void * __user)(ubuf_addr + ubuf_size);
+ params[np].u.membuf.size = u[i].b.size;
+ if (copy_to_user(params[np].u.membuf.uaddr, u[i].b.addr, u[i].b.size))
+ goto out_failed;
+
+ np++;
+ } else if (at == QCOM_TEE_ARG_TYPE_IO) {
+ params[np].attr = TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT;
+ if (qcom_tee_objref_from_arg(¶ms[np], &u[i], ctx))
+ goto out_failed;
+
+ np++;
+ }
+ }
+
+ return np;
+
+out_failed:
+
+ /* On ERROR: */
+ /* - Release params associated to QTEE objects in this context so far. */
+ for (; np >= 0; np--) {
+ if (params[np].attr == TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT)
+ qcom_tee_context_del_qtee_object(¶ms[np], ctx);
+ }
+ /* - Release any IO objects not processed so far. */
+ while (u[i].type) {
+ if (u[i].type == QCOM_TEE_ARG_TYPE_IO)
+ qcom_tee_object_put(u[i++].o);
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * qcom_tee_cb_params_to_args() - Convert TEE parameters to QTEE arguments in a context.
+ * @u: QTEE arguments.
+ * @params: TEE parameters.
+ * @num_params: number of elements in the parameter array.
+ * @ctx: context in which the conversion should happen.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+static int qcom_tee_cb_params_to_args(struct qcom_tee_arg *u,
+ struct tee_param *params, int num_params,
+ struct qcom_tee_context *ctx)
+{
+ struct qcom_tee_object *object;
+ int i, np = 0;
+
+ qcom_tee_arg_for_each(i, u) {
+ enum qcom_tee_arg_type at = u[i].type;
+
+ if (at == QCOM_TEE_ARG_TYPE_OB) {
+ if (params[np].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMBUF_OUTPUT ||
+ params[np].u.membuf.size > u[i].b.size)
+ goto out_failed;
+
+ if (copy_from_user(u[i].b.addr, params[np].u.membuf.uaddr, u[i].b.size))
+ goto out_failed;
+
+ u[i].b.size = params[np].u.membuf.size;
+
+ np++;
+ } else if (at == QCOM_TEE_ARG_TYPE_OO) {
+ if (params[np].attr == TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT) {
+ if (qcom_tee_objref_to_arg(&u[i], ¶ms[np], ctx))
+ goto out_failed;
+ } else {
+ goto out_failed;
+ }
+
+ np++;
+ }
+ }
+
+ return 0;
+
+out_failed:
+
+ /* On ERROR: */
+ /* Put OO objects processed so far. */
+ for (--i; i >= 0; i--) {
+ if (u[i].type != QCOM_TEE_ARG_TYPE_OO)
+ continue;
+
+ object = u[i].o;
+ qcom_tee_user_object_set_notify(object, false);
+ /* For callback object, we hold a reference for the driver, put it. */
+ if (typeof_qcom_tee_object(object) == QCOM_TEE_OBJECT_TYPE_CB_OBJECT)
+ qcom_tee_object_put(object);
+ /* Put QTEE copy of object. */
+ qcom_tee_object_put(object);
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * qcom_tee_user_object_pop() - Pop a request for a user object.
+ * @ctx: context to look for user object.
+ * @params: parameters for @op.
+ * @num_params: number of elements in the parameter array.
+ * @uaddr: user buffer for output MEMBUF parameters.
+ * @size: size of user buffer @uaddr.
+ * @data: information for the pop request.
+ *
+ * @params is filled along with @data for the picked request.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_user_object_pop(struct qcom_tee_context *ctx,
+ struct tee_param *params, int num_params,
+ void __user *uaddr, size_t size,
+ struct qcom_tee_user_object_request_data *data)
+{
+ struct qcom_tee_user_req *ureq;
+ struct qcom_tee_arg *req_args;
+ u64 req_object_id;
+ u32 req_op;
+ int req_id;
+ int ret;
+
+ while (1) {
+ scoped_guard(srcu, &ctx->req_srcu) {
+ /* Pop a request 'QUEUED -> PROCESSING'. */
+ ureq = qcom_tee_supp_pop_entry(ctx, size, num_params);
+ if (!ureq)
+ goto wait_for_request;
+
+ /* On failure, issue with params, e.g. not enough space in user buffer. */
+ if (IS_ERR(ureq))
+ return PTR_ERR(ureq);
+
+ /* ''Prepare user request:'' */
+ req_id = ureq->req_id;
+ req_object_id = ureq->object_id;
+ req_op = ureq->op;
+ req_args = ureq->args;
+ ret = qcom_tee_cb_params_from_args(params, req_args,
+ num_params, uaddr,
+ size, ctx);
+ }
+
+ if (ret >= 0)
+ break;
+
+ /* On failure, issue with req_args, e.g. invalid object. */
+ scoped_guard(mutex, &ctx->lock) {
+ /* If (!= __empty_req) then 'PROCESSING -> PROCESSED'. */
+ if (idr_remove(&ctx->reqs_idr, req_id) == ureq) {
+ ureq->state = QCOM_TEE_REQ_PROCESSED;
+ ureq->errno = ret;
+ /* Send error to QTEE. */
+ complete(&ureq->c);
+ }
+ }
+
+ /* Try next request. */
+ continue;
+
+wait_for_request:
+ /* Wait for a new QUEUED request. */
+ if (wait_for_completion_interruptible(&ctx->req_c))
+ return -ERESTARTSYS;
+ }
+
+ /* It is a RELEASE message; no one is waiting for result. */
+ if (req_op == QCOM_TEE_OBJREF_OP_RELEASE) {
+ scoped_guard(mutex, &ctx->lock)
+ idr_remove(&ctx->reqs_idr, req_id);
+ kfree(ureq);
+ }
+
+ /* ''Pick a pending request:'' */
+ data->id = req_id;
+ data->object_id = req_object_id;
+ data->op = req_op;
+ data->np = ret;
+
+ return 0;
+}
+
+/**
+ * qcom_tee_user_object_submit() - Submit a response for a user object.
+ * @ctx: context to look for user object.
+ * @params: returned parameters.
+ * @num_params: number of elements in the parameter array.
+ * @id: request id for the response.
+ * @errno: result of user object invocation.
+ *
+ * Return: On success return 0 or <0 on failure.
+ */
+int qcom_tee_user_object_submit(struct qcom_tee_context *ctx,
+ struct tee_param *params, int num_params, int id, int errno)
+{
+ struct qcom_tee_user_req *ureq;
+
+ scoped_guard(srcu, &ctx->req_srcu) {
+ scoped_guard(mutex, &ctx->lock) {
+ ureq = idr_remove(&ctx->reqs_idr, id);
+ /* Is id invalid, or no one is waiting on response. */
+ if (ureq == &__empty_ureq || !ureq)
+ return -ENODEV;
+
+ ureq->state = QCOM_TEE_REQ_PROCESSED;
+ }
+
+ ureq->errno = errno;
+ /* Process params only on SUCCESS. */
+ if (!errno)
+ ureq->errno = qcom_tee_cb_params_to_args(ureq->args, params,
+ num_params, ctx);
+
+ errno = (!errno && ureq->errno) ? ureq->errno : 0;
+ /* Send result to QTEE. */
+ complete(&ureq->c);
+ }
+
+ return errno;
+}
@@ -59,6 +59,7 @@
#define TEE_IMPL_ID_OPTEE 1
#define TEE_IMPL_ID_AMDTEE 2
#define TEE_IMPL_ID_TSTEE 3
+#define TEE_IMPL_ID_QTEE 4
/*
* OP-TEE specific capabilities
Introduce basic support for invoking objects hosted in QTEE and userspace through the TEE subsystem. Signed-off-by: Amirreza Zarrabi <quic_azarrabi@quicinc.com> --- drivers/tee/qcomtee/Makefile | 2 + drivers/tee/qcomtee/call.c | 707 ++++++++++++++++++++++++++++++++++ drivers/tee/qcomtee/core.c | 8 + drivers/tee/qcomtee/qcomtee_private.h | 166 ++++++++ drivers/tee/qcomtee/user_obj.c | 625 ++++++++++++++++++++++++++++++ include/uapi/linux/tee.h | 1 + 6 files changed, 1509 insertions(+)