| Message ID | 20241203-x1e80100-va-mic-bias-v1-1-0dfd4d9b492c@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: Drop duplicate DMIC supplies for X13S/CRD | expand |
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index f3190f408f4b2c7ca9fe368d652d5d66bb3949af..0f1ebd869ce315bfed2c17ae90b2451b3892b96b 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -1202,9 +1202,6 @@ &sound { "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", - "VA DMIC0", "VA MIC BIAS1", - "VA DMIC1", "VA MIC BIAS1", - "VA DMIC2", "VA MIC BIAS3", "TX SWR_ADC1", "ADC2_OUTPUT"; wcd-playback-dai-link {
The WCD938x codec provides two controls for each of the MIC_BIASn outputs: - "MIC BIASn" enables an internal regulator to generate the output with a configurable voltage (qcom,micbiasN-microvolt). - "VA MIC BIASn" enables "pull-up mode" that bypasses the internal regulator and directly outputs fixed 1.8V from the VDD_PX pin. This is intended for low-power VA (voice activation) use cases. The audio-routing setup for the ThinkPad X13s currently specifies both as power supplies for the DMICs, but only one of them can be active at the same time. In practice, only the internal regulator is used with the current setup because the driver prefers it over pull-up mode. Make this more clear by dropping the redundant routes to the pull-up "VA MIC BIASn" supply. There is no functional difference except that we skip briefly switching to pull-up mode when shutting down the microphone. Fixes: 2e498f35c385 ("arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> --- arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 3 --- 1 file changed, 3 deletions(-)