@@ -133,6 +133,14 @@ config CORESIGHT_STM
To compile this driver as a module, choose M here: the
module will be called coresight-stm.
+config CORESIGHT_CTCU
+ tristate "CoreSight TMC Control Unit driver"
+ help
+ This driver provides support for CoreSight TMC Control Unit
+ that hosts miscellaneous configuration registers. This is
+ primarily used for controlling the behaviors of the TMC
+ ETR device.
+
config CORESIGHT_CPU_DEBUG
tristate "CoreSight CPU Debug driver"
depends on ARM || ARM64
@@ -51,3 +51,4 @@ coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
coresight-cti-sysfs.o
obj-$(CONFIG_ULTRASOC_SMB) += ultrasoc-smb.o
obj-$(CONFIG_CORESIGHT_DUMMY) += coresight-dummy.o
+obj-$(CONFIG_CORESIGHT_CTCU) += coresight-ctcu.o
new file mode 100644
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/coresight.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "coresight-ctcu.h"
+#include "coresight-priv.h"
+#include "coresight-trace-id.h"
+
+DEFINE_CORESIGHT_DEVLIST(ctcu_devs, "ctcu");
+
+#define ctcu_writel(drvdata, val, offset) __raw_writel((val), drvdata->base + offset)
+#define ctcu_readl(drvdata, offset) __raw_readl(drvdata->base + offset)
+
+/* The TMC Coresight Control Unit uses four ATID registers to control the data filter function based
+ * on the trace ID for each TMC ETR sink. The length of each ATID register is 32 bits. Therefore,
+ * the ETR has a related field in CTCU that is 128 bits long. Each trace ID is represented by one
+ * bit in that filed.
+ * e.g. ETR0ATID0 layout, set bit 5 for traceid 5
+ * bit5
+ * ------------------------------------------------------
+ * | |28| |24| |20| |16| |12| |8| 1|4| |0|
+ * ------------------------------------------------------
+ *
+ * e.g. ETR0:
+ * 127 0 from ATID_offset for ETR0ATID0
+ * -------------------------
+ * |ATID3|ATID2|ATID1|ATID0|
+ *
+ */
+#define CTCU_ATID_REG_OFFSET(traceid, atid_offset) \
+ ((traceid / 32) * 4 + atid_offset)
+
+#define CTCU_ATID_REG_BIT(traceid) (traceid % 32)
+#define CTCU_ATID_REG_SIZE 0x10
+
+struct ctcu_atid_config {
+ const int atid_offset;
+ const int port_num;
+};
+
+struct ctcu_config {
+ const struct ctcu_atid_config *atid_config;
+ int num_atid_config;
+};
+
+static const struct ctcu_atid_config sa8775p_atid_cfgs[] = {
+ {0xf8, 0},
+ {0x108, 1},
+};
+
+static const struct ctcu_config sa8775p_cfgs = {
+ .atid_config = sa8775p_atid_cfgs,
+ .num_atid_config = ARRAY_SIZE(sa8775p_atid_cfgs),
+};
+
+/*
+ * __ctcu_set_etr_traceid: Set bit in the ATID register based on trace ID when enable is true.
+ * Reset the bit of the ATID register based on trace ID when enable is false.
+ *
+ * @csdev: coresight_device struct related to the device
+ * @traceid: trace ID of the source tracer.
+ * @enable: True for set bit and false for reset bit.
+ *
+ * Returns 0 indicates success. Non-zero result means failure.
+ */
+static int __ctcu_set_etr_traceid(struct coresight_device *csdev,
+ u8 traceid,
+ int port_num,
+ bool enable)
+{
+ uint32_t atid_offset;
+ struct ctcu_drvdata *drvdata;
+ unsigned long flags;
+ uint32_t reg_offset;
+ int bit;
+ uint32_t val;
+
+ if (!IS_VALID_CS_TRACE_ID(traceid) || port_num < 0)
+ return -EINVAL;
+
+ drvdata = dev_get_drvdata(csdev->dev.parent);
+ if (IS_ERR_OR_NULL(drvdata))
+ return -EINVAL;
+
+ atid_offset = drvdata->atid_offset[port_num];
+ if (atid_offset == 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&drvdata->spin_lock, flags);
+ CS_UNLOCK(drvdata->base);
+
+ reg_offset = CTCU_ATID_REG_OFFSET(traceid, atid_offset);
+ bit = CTCU_ATID_REG_BIT(traceid);
+ if (reg_offset - atid_offset >= CTCU_ATID_REG_SIZE ||
+ bit >= CORESIGHT_TRACE_IDS_MAX) {
+ CS_LOCK(drvdata);
+ spin_unlock_irqrestore(&drvdata->spin_lock, flags);
+ return -EINVAL;
+ }
+
+ val = ctcu_readl(drvdata, reg_offset);
+ if (enable)
+ val = val | BIT(bit);
+ else
+ val = val & ~BIT(bit);
+ ctcu_writel(drvdata, val, reg_offset);
+
+ CS_LOCK(drvdata->base);
+ spin_unlock_irqrestore(&drvdata->spin_lock, flags);
+
+ return 0;
+}
+
+static int ctcu_get_active_port(struct coresight_device *sink, struct coresight_device *helper)
+{
+ int port, i;
+
+ for (i = 0; i < sink->pdata->nr_outconns; ++i) {
+ if (sink->pdata->out_conns[i]->dest_dev) {
+ port = sink->pdata->out_conns[i]->dest_port;
+ return port;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * ctcu_set_etr_traceid: Retrieve the ATID offset and trace ID.
+ *
+ * Returns 0 indicates success. None-zero result means failure.
+ */
+static int ctcu_set_etr_traceid(struct coresight_device *csdev,
+ struct cs_sink_data *sink_data,
+ bool enable)
+{
+ int port_num;
+
+ if (!IS_VALID_CS_TRACE_ID(sink_data->traceid) ||
+ (csdev == NULL) ||
+ (sink_data->sink == NULL)) {
+ dev_dbg(&csdev->dev, "Invalid parameters\n");
+ return -EINVAL;
+ }
+
+ port_num = ctcu_get_active_port(sink_data->sink, csdev);
+ if (port_num < 0)
+ return -EINVAL;
+
+ dev_dbg(&csdev->dev, "traceid is %d\n", sink_data->traceid);
+
+ return __ctcu_set_etr_traceid(csdev, sink_data->traceid, port_num, enable);
+}
+
+static int ctcu_enable(struct coresight_device *csdev, enum cs_mode mode,
+ void *data)
+{
+ int ret = 0;
+ struct cs_sink_data *sink_data = (struct cs_sink_data *)data;
+
+ ret = ctcu_set_etr_traceid(csdev, sink_data, true);
+ if (ret)
+ dev_dbg(&csdev->dev, "enable data filter failed\n");
+
+ return 0;
+}
+
+static int ctcu_disable(struct coresight_device *csdev, void *data)
+{
+ int ret = 0;
+ struct cs_sink_data *sink_data = (struct cs_sink_data *)data;
+
+ ret = ctcu_set_etr_traceid(csdev, sink_data, false);
+ if (ret)
+ dev_dbg(&csdev->dev, "disable data filter failed\n");
+
+ return 0;
+}
+
+static const struct coresight_ops_helper ctcu_helper_ops = {
+ .enable = ctcu_enable,
+ .disable = ctcu_disable,
+};
+
+static const struct coresight_ops ctcu_ops = {
+ .helper_ops = &ctcu_helper_ops,
+};
+
+static int ctcu_probe(struct platform_device *pdev)
+{
+ int i;
+ void __iomem *base;
+ struct device *dev = &pdev->dev;
+ struct coresight_platform_data *pdata;
+ struct ctcu_drvdata *drvdata;
+ struct coresight_desc desc = { 0 };
+ const struct ctcu_config *cfgs;
+ const struct ctcu_atid_config *atid_cfg;
+
+ desc.name = coresight_alloc_device_name(&ctcu_devs, dev);
+ if (!desc.name)
+ return -ENOMEM;
+
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ pdata = coresight_get_platform_data(dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ dev->platform_data = pdata;
+
+ base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+ if (!base)
+ return -ENOMEM;
+
+ drvdata->apb_clk = coresight_get_enable_apb_pclk(dev);
+ if (IS_ERR(drvdata->apb_clk))
+ return -ENODEV;
+
+ cfgs = of_device_get_match_data(dev);
+ if (cfgs) {
+ if (cfgs->num_atid_config <= ATID_MAX_NUM) {
+ for (i = 0; i < cfgs->num_atid_config; i++) {
+ atid_cfg = &cfgs->atid_config[i];
+ drvdata->atid_offset[i] = atid_cfg->atid_offset;
+ }
+ }
+ }
+
+ drvdata->base = base;
+ drvdata->dev = dev;
+ platform_set_drvdata(pdev, drvdata);
+
+ desc.type = CORESIGHT_DEV_TYPE_HELPER;
+ desc.subtype.helper_subtype = CORESIGHT_DEV_SUBTYPE_HELPER_CTCU;
+ desc.pdata = pdata;
+ desc.dev = dev;
+ desc.ops = &ctcu_ops;
+
+ drvdata->csdev = coresight_register(&desc);
+ if (IS_ERR(drvdata->csdev)) {
+ if (!IS_ERR_OR_NULL(drvdata->apb_clk))
+ clk_put(drvdata->apb_clk);
+
+ return PTR_ERR(drvdata->csdev);
+ }
+
+ return 0;
+}
+
+static void ctcu_remove(struct platform_device *pdev)
+{
+ struct ctcu_drvdata *drvdata = platform_get_drvdata(pdev);
+
+ coresight_unregister(drvdata->csdev);
+ if (!IS_ERR_OR_NULL(drvdata->apb_clk))
+ clk_put(drvdata->apb_clk);
+}
+
+static const struct of_device_id ctcu_match[] = {
+ {.compatible = "qcom,sa8775p-ctcu", .data = &sa8775p_cfgs},
+ {}
+};
+
+static struct platform_driver ctcu_driver = {
+ .probe = ctcu_probe,
+ .remove = ctcu_remove,
+ .driver = {
+ .name = "coresight-ctcu",
+ .of_match_table = ctcu_match,
+ .suppress_bind_attrs = true,
+ },
+};
+module_platform_driver(ctcu_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CoreSight TMC Control Unit driver");
new file mode 100644
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _CORESIGHT_CTCU_H
+#define _CORESIGHT_CTCU_H
+
+#define ATID_MAX_NUM 5
+
+struct ctcu_drvdata {
+ void __iomem *base;
+ struct clk *apb_clk;
+ phys_addr_t pbase;
+ struct device *dev;
+ struct coresight_device *csdev;
+ spinlock_t spin_lock;
+ uint32_t atid_offset[ATID_MAX_NUM];
+};
+
+#endif
@@ -71,7 +71,8 @@ enum coresight_dev_subtype_source {
enum coresight_dev_subtype_helper {
CORESIGHT_DEV_SUBTYPE_HELPER_CATU,
- CORESIGHT_DEV_SUBTYPE_HELPER_ECT_CTI
+ CORESIGHT_DEV_SUBTYPE_HELPER_ECT_CTI,
+ CORESIGHT_DEV_SUBTYPE_HELPER_CTCU
};
/**
The Coresight TMC Control Unit hosts miscellaneous configuration registers which control various features related to TMC ETR sink. Based on the trace ID, which is programmed in the related CTCU ATID register of a specific ETR, trace data with that trace ID gets into the ETR buffer, while other trace data gets dropped. Enabling source device sets one bit of the ATID register based on source device's trace ID. Disabling source device resets the bit according to the source device's trace ID. Signed-off-by: Jie Gan <quic_jiegan@quicinc.com> --- drivers/hwtracing/coresight/Kconfig | 8 + drivers/hwtracing/coresight/Makefile | 1 + drivers/hwtracing/coresight/coresight-ctcu.c | 292 +++++++++++++++++++ drivers/hwtracing/coresight/coresight-ctcu.h | 21 ++ include/linux/coresight.h | 3 +- 5 files changed, 324 insertions(+), 1 deletion(-) create mode 100644 drivers/hwtracing/coresight/coresight-ctcu.c create mode 100644 drivers/hwtracing/coresight/coresight-ctcu.h