@@ -325,6 +325,24 @@ static struct clk_rcg2 gcc_xo_clk_src = {
},
};
+static struct clk_branch gcc_xo_clk = {
+ .halt_reg = 0x34018,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x34018,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "gcc_xo_clk",
+ .parent_hws = (const struct clk_hw*[]) {
+ &gcc_xo_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_fixed_factor gcc_xo_div4_clk_src = {
.mult = 1,
.div = 4,
@@ -2920,6 +2938,7 @@ static struct clk_regmap *gcc_ipq5424_clocks[] = {
[GCC_QPIC_CLK_SRC] = &gcc_qpic_clk_src.clkr,
[GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr,
[GCC_XO_CLK_SRC] = &gcc_xo_clk_src.clkr,
+ [GCC_XO_CLK] = &gcc_xo_clk.clkr,
[GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
[GCC_QDSS_AT_CLK] = &gcc_qdss_at_clk.clkr,
[GPLL0] = &gpll0.clkr,
The gcc_xo_clk is required for the functionality of the WiFi copy engine block. Therefore, add the gcc_xo_clk in gcc driver. Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com> --- drivers/clk/qcom/gcc-ipq5424.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)