diff mbox series

[v2,04/14] arm64: dts: qcom: sm6115: add LPASS devices

Message ID 20241212004727.2903846-5-alexey.klimov@linaro.org (mailing list archive)
State New
Headers show
Series qrb4210-rb2: add wsa audio playback and capture support | expand

Commit Message

Alexey Klimov Dec. 12, 2024, 12:47 a.m. UTC 
The rxmacro, txmacro, vamacro, soundwire nodes, lpass clock
controllers are required to support audio playback and
audio capture on sm6115 and its derivatives.

Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 132 +++++++++++++++++++++++++++
 1 file changed, 132 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index df2241237b26..9412cbe23d88 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -2687,6 +2687,138 @@  funnel_apss1_in: endpoint {
 			};
 		};
 
+		rxmacro: codec@a600000 {
+			compatible = "qcom,sm6115-lpass-rx-macro";
+			reg = <0x0 0xa600000 0x0 0x1000>;
+
+			clocks = <&q6afecc LPASS_CLK_ID_RX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_RX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk",
+				      "npl",
+				      "dcodec",
+				      "fsgen";
+			assigned-clocks = <&q6afecc LPASS_CLK_ID_RX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6afecc LPASS_CLK_ID_RX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <22579200>,
+					       <22579200>;
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@a610000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x0a610000 0x0 0x2000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+
+			resets = <&lpass_audiocc 0>;
+			reset-names = "swr_audio_cgcr";
+
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		txmacro: codec@a620000 {
+			compatible = "qcom,sm6115-lpass-tx-macro";
+			reg = <0x0 0x0a620000 0x0 0x1000>;
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk",
+				      "npl",
+				      "dcodec",
+				      "fsgen";
+			assigned-clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>,
+					       <19200000>;
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_audiocc: clock-controller@a6a9000 {
+			compatible = "qcom,sm6115-lpassaudiocc";
+			reg = <0x0 0x0a6a9000 0x0 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		vamacro: codec@a730000 {
+			compatible = "qcom,sm6115-lpass-va-macro";
+			reg = <0x0 0x0a730000 0x0 0x1000>;
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "dcodec",
+				      "npl";
+			assigned-clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>,
+					       <19200000>;
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@a740000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x0a740000 0x0 0x2000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&txmacro>;
+			clock-names = "iface";
+
+			resets = <&lpasscc 0>;
+			reset-names = "swr_audio_cgcr";
+
+			label = "VA_TX";
+			qcom,din-ports = <3>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x00 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		lpasscc: clock-controller@a7ec000 {
+			compatible = "qcom,sm6115-lpasscc";
+			reg = <0x0 0x0a7ec000 0x0 0x1000>;
+			#reset-cells = <1>;
+		};
+
 		remoteproc_adsp: remoteproc@ab00000 {
 			compatible = "qcom,sm6115-adsp-pas";
 			reg = <0x0 0x0ab00000 0x0 0x100>;