diff mbox series

[v3,2/2] arm64: dts: qcom: qcs8300-ride: Enable PMIC peripherals

Message ID 20250108-adds-spmi-pmic-peripherals-for-qcs8300-v3-2-ee94642279ff@quicinc.com (mailing list archive)
State New
Headers show
Series Adds SPMI bus, PMIC and peripherals for qcs8300-ride | expand

Commit Message

Tingguo Cheng Jan. 8, 2025, 11 a.m. UTC 
Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi | 51 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts   |  1 +
 2 files changed, 52 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi b/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..a94b0bfa98dc39e41d1a0de3373753953609b95c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
@@ -0,0 +1,51 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmm8620au_0: pmic@0 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8620au_0_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pmm8620au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8620au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8650au_1: pmic@2 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8650au_1_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8650au_1_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 85b84778e85ae712473eee78a8e090c49dfc3721..1c8f0e7774a6044bd09d9e7a5e12166a83087708 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -9,6 +9,7 @@ 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "qcs8300.dtsi"
+#include "qcs8300-pmics.dtsi"
 / {
 	model = "Qualcomm Technologies, Inc. QCS8300 Ride";
 	compatible = "qcom,qcs8300-ride", "qcom,qcs8300";