@@ -1134,7 +1134,7 @@ static int lt9611_probe(struct i2c_client *client)
lt9611->bridge.of_node = client->dev.of_node;
lt9611->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID |
DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_MODES |
- DRM_BRIDGE_OP_HDMI;
+ DRM_BRIDGE_OP_HDMI | DRM_BRIDGE_OP_HDMI_AUDIO;
lt9611->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
lt9611->bridge.vendor = "Lontium";
lt9611->bridge.product = "LT9611";
@@ -98,6 +98,13 @@ struct drm_bridge_connector {
* HDMI connector infrastructure, if any (see &DRM_BRIDGE_OP_HDMI).
*/
struct drm_bridge *bridge_hdmi;
+ /**
+ * @bridge_hdmi_audio:
+ *
+ * The bridge in the chain that implements necessary support for the
+ * HDMI Audio infrastructure, if any (see &DRM_BRIDGE_OP_HDMI_AUDIO).
+ */
+ struct drm_bridge *bridge_hdmi_audio;
};
#define to_drm_bridge_connector(x) \
@@ -433,7 +440,7 @@ static int drm_bridge_connector_audio_startup(struct drm_connector *connector)
to_drm_bridge_connector(connector);
struct drm_bridge *bridge;
- bridge = bridge_connector->bridge_hdmi;
+ bridge = bridge_connector->bridge_hdmi_audio;
if (!bridge)
return -EINVAL;
@@ -451,7 +458,7 @@ static int drm_bridge_connector_audio_prepare(struct drm_connector *connector,
to_drm_bridge_connector(connector);
struct drm_bridge *bridge;
- bridge = bridge_connector->bridge_hdmi;
+ bridge = bridge_connector->bridge_hdmi_audio;
if (!bridge)
return -EINVAL;
@@ -464,7 +471,7 @@ static void drm_bridge_connector_audio_shutdown(struct drm_connector *connector)
to_drm_bridge_connector(connector);
struct drm_bridge *bridge;
- bridge = bridge_connector->bridge_hdmi;
+ bridge = bridge_connector->bridge_hdmi_audio;
if (!bridge)
return;
@@ -478,7 +485,7 @@ static int drm_bridge_connector_audio_mute_stream(struct drm_connector *connecto
to_drm_bridge_connector(connector);
struct drm_bridge *bridge;
- bridge = bridge_connector->bridge_hdmi;
+ bridge = bridge_connector->bridge_hdmi_audio;
if (!bridge)
return -EINVAL;
@@ -576,6 +583,21 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
max_bpc = bridge->max_bpc;
}
+ if (bridge->ops & DRM_BRIDGE_OP_HDMI_AUDIO) {
+ if (bridge_connector->bridge_hdmi_audio)
+ return ERR_PTR(-EBUSY);
+
+ if (!bridge->hdmi_audio_max_i2s_playback_channels &&
+ !bridge->hdmi_audio_spdif_playback)
+ return ERR_PTR(-EINVAL);
+
+ if (!bridge->funcs->hdmi_audio_prepare ||
+ !bridge->funcs->hdmi_audio_shutdown)
+ return ERR_PTR(-EINVAL);
+
+ bridge_connector->bridge_hdmi_audio = bridge;
+ }
+
if (!drm_bridge_get_next_bridge(bridge))
connector_type = bridge->type;
@@ -611,22 +633,6 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
max_bpc);
if (ret)
return ERR_PTR(ret);
-
- if (bridge->hdmi_audio_max_i2s_playback_channels ||
- bridge->hdmi_audio_spdif_playback) {
- if (!bridge->funcs->hdmi_audio_prepare ||
- !bridge->funcs->hdmi_audio_shutdown)
- return ERR_PTR(-EINVAL);
-
- ret = drm_connector_hdmi_audio_init(connector,
- bridge->hdmi_audio_dev,
- &drm_bridge_connector_hdmi_audio_funcs,
- bridge->hdmi_audio_max_i2s_playback_channels,
- bridge->hdmi_audio_spdif_playback,
- bridge->hdmi_audio_dai_port);
- if (ret)
- return ERR_PTR(ret);
- }
} else {
ret = drmm_connector_init(drm, connector,
&drm_bridge_connector_funcs,
@@ -635,6 +641,19 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
return ERR_PTR(ret);
}
+ if (bridge_connector->bridge_hdmi_audio) {
+ bridge = bridge_connector->bridge_hdmi_audio;
+
+ ret = drm_connector_hdmi_audio_init(connector,
+ bridge->hdmi_audio_dev,
+ &drm_bridge_connector_hdmi_audio_funcs,
+ bridge->hdmi_audio_max_i2s_playback_channels,
+ bridge->hdmi_audio_spdif_playback,
+ bridge->hdmi_audio_dai_port);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+
drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs);
if (bridge_connector->bridge_hpd)
@@ -693,8 +693,10 @@ struct drm_bridge_funcs {
/**
* @hdmi_audio_prepare:
* Configures HDMI-encoder for audio stream. Can be called multiple
- * times for each setup. Mandatory if HDMI audio is enabled in the
- * bridge's configuration.
+ * times for each setup.
+ *
+ * This callback is optional but it must be implemented by bridges that
+ * set the DRM_BRIDGE_OP_HDMI_AUDIO flag in their &drm_bridge->ops.
*
* Returns:
* 0 on success, a negative error code otherwise
@@ -707,8 +709,10 @@ struct drm_bridge_funcs {
/**
* @hdmi_audio_shutdown:
*
- * Shut down the audio stream. Mandatory if HDMI audio is enabled in
- * the bridge's configuration.
+ * Shut down the audio stream.
+ *
+ * This callback is optional but it must be implemented by bridges that
+ * set the DRM_BRIDGE_OP_HDMI_AUDIO flag in their &drm_bridge->ops.
*
* Returns:
* 0 on success, a negative error code otherwise
@@ -814,6 +818,17 @@ enum drm_bridge_ops {
* drivers.
*/
DRM_BRIDGE_OP_HDMI = BIT(4),
+ /**
+ * @DRM_BRIDGE_OP_HDMI_AUDIO: The bridge provides HDMI audio operations.
+ * Bridges that set this flag must implement the
+ * &drm_bridge_funcs->hdmi_audio_prepare and
+ * &drm_bridge_funcs->hdmi_audio_shutdown callbacks.
+ *
+ * Note: currently there can be at most one bridge in a chain that sets
+ * this bit. This is to simplify corresponding glue code in connector
+ * drivers.
+ */
+ DRM_BRIDGE_OP_HDMI_AUDIO = BIT(5),
};
/**
As pointed out by Laurent, OP bits are supposed to describe operations. Split DRM_BRIDGE_OP_HDMI_AUDIO from DRM_BRIDGE_OP_HDMI instead of overloading DRM_BRIDGE_OP_HDMI. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/bridge/lontium-lt9611.c | 2 +- drivers/gpu/drm/display/drm_bridge_connector.c | 59 +++++++++++++++++--------- include/drm/drm_bridge.h | 23 ++++++++-- 3 files changed, 59 insertions(+), 25 deletions(-)