diff mbox series

[v5,2/2] arm64: dts: qcom: sdm845-oneplus: Add alert-slider

Message ID 20250419-op6-tri-state-v5-2-443127078517@ixit.cz (mailing list archive)
State New
Headers show
Series Add support for sound profile switching and leverage for OnePlus 6 slider | expand

Commit Message

David Heidelberg April 19, 2025, 7:46 p.m. UTC 
From: Gergo Koteles <soyer@irl.hu>

The alert-slider is a tri-state sound profile switch found on the
OnePlus 6, Android maps the states to "silent", "vibrate" and "ring".
Expose them as ABS_SND_PROFILE events.
The previous GPIO numbers were wrong. Update them to the correct ones.

Co-developed-by: Casey Connolly <casey@connolly.tech>
Signed-off-by: Casey Connolly <casey@connolly.tech>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 .../arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 39 ++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 8a0f154bffc3d55ae2134ef28cb7653dde702552..9a508b3149bef50c0ed897dec3c01a3f08712e85 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -21,6 +21,41 @@ 
 /delete-node/ &rmtfs_mem;
 
 / {
+	alert-slider {
+		compatible = "gpio-keys";
+		label = "Alert slider";
+
+		pinctrl-0 = <&alert_slider_default>;
+		pinctrl-names = "default";
+
+		switch-top {
+			label = "Silent";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <SND_PROFILE_SILENT>;
+			gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+		};
+
+		switch-middle {
+			label = "Vibrate";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <SND_PROFILE_VIBRATE>;
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+		};
+
+		switch-bottom {
+			label = "Ring";
+			linux,input-type = <EV_ABS>;
+			linux,code = <ABS_SND_PROFILE>;
+			linux,input-value = <SND_PROFILE_RING>;
+			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+		};
+	};
+
 	aliases {
 		serial0 = &uart9;
 		serial1 = &uart6;
@@ -799,8 +834,8 @@  hall_sensor_default: hall-sensor-default-state {
 		bias-disable;
 	};
 
-	tri_state_key_default: tri-state-key-default-state {
-		pins = "gpio40", "gpio42", "gpio26";
+	alert_slider_default: alert-slider-default-state {
+		pins = "gpio126", "gpio52", "gpio24";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;