diff mbox series

[v1,03/10] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config

Message ID 543183ecfba929683c1b8d7ff24d75df489ef0cf.1693996662.git.quic_varada@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Enable cpufreq for IPQ5332 & IPQ9574 | expand

Commit Message

Varadarajan Narayanan Sept. 7, 2023, 5:21 a.m. UTC
The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
this frequency. Hence set it to 0x2d to get 1.1GHz which is
supported in all SKUs.

Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 drivers/clk/qcom/apss-ipq-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Konrad Dybcio Sept. 7, 2023, 8:25 a.m. UTC | #1
On 7.09.2023 07:21, Varadarajan Narayanan wrote:
> The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
> this frequency. Hence set it to 0x2d to get 1.1GHz which is
> supported in all SKUs.
> 
> Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Dmitry Baryshkov Sept. 7, 2023, 1:40 p.m. UTC | #2
On Thu, 7 Sept 2023 at 08:22, Varadarajan Narayanan
<quic_varada@quicinc.com> wrote:
>
> The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
> this frequency. Hence set it to 0x2d to get 1.1GHz which is
> supported in all SKUs.
>
> Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
> Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index 18c4ffe..41279e5 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -74,7 +74,7 @@  static struct clk_alpha_pll ipq_pll_stromer_plus = {
 };
 
 static const struct alpha_pll_config ipq5332_pll_config = {
-	.l = 0x3e,
+	.l = 0x2d,
 	.config_ctl_val = 0x4001075b,
 	.config_ctl_hi_val = 0x304,
 	.main_output_mask = BIT(0),