| Message ID | 787cb004e6e7db766f68cb7ace9028c37085088a.1618015804.git.gurus@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Qualcomm Technologies, Inc. PM8008 MFD driver | expand |
On Fri, Apr 09, 2021 at 05:55:01PM -0700, Guru Das Srinagesh wrote: > Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver. > > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> > --- > .../devicetree/bindings/mfd/qcom,pm8008.yaml | 119 +++++++++++++++++++++ > 1 file changed, 119 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > new file mode 100644 > index 0000000..0cafa98 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > @@ -0,0 +1,119 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. PM8008 PMIC bindings > + > +maintainers: > + - Guru Das Srinagesh <gurus@codeaurora.org> > + > +description: | > + Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates > + all the necessary power management, housekeeping, and interface support > + functions into a single IC. > + > +properties: > + compatible: > + const: qcom,pm8008 > + > + reg: > + description: > + I2C slave address. > + > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + description: Parent interrupt. > + > + "#interrupt-cells": > + const: 2 > + > + description: | > + The first cell is the IRQ number, the second cell is the IRQ trigger > + flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. > + > + interrupt-controller: true > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^pinctrl@[0-9a-f]+$": Doesn't look like a pin controller. 'gpio@...' instead. > + type: object additionalProperties: false > + > + description: | > + The GPIO peripheral. This node may be specified twice, one for each GPIO. > + > + properties: > + compatible: > + const: qcom,pm8008-gpio > + > + reg: > + description: Peripheral address of one of the two GPIO peripherals. > + maxItems: 1 > + > + gpio-controller: true > + > + interrupt-controller: true > + > + "#interrupt-cells": > + const: 2 > + > + "#gpio-cells": > + const: 2 > + > + required: > + - compatible > + - reg > + - gpio-controller > + - interrupt-controller > + - "#gpio-cells" > + - "#interrupt-cells" > + > +required: > + - compatible > + - reg > + - interrupts > + - "#address-cells" > + - "#size-cells" > + - "#interrupt-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/mfd/qcom-pm8008.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + qupv3_se13_i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + pm8008i@8 { > + compatible = "qcom,pm8008"; > + reg = <0x8>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <32 IRQ_TYPE_EDGE_RISING>; > + > + pinctrl@c000 { > + compatible = "qcom,pm8008-gpio"; > + reg = <0xc000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + }; > + > +... > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On Mon, Apr 12, 2021 at 02:37:48PM -0500, Rob Herring wrote: > On Fri, Apr 09, 2021 at 05:55:01PM -0700, Guru Das Srinagesh wrote: > > Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver. > > > > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> > > --- > > .../devicetree/bindings/mfd/qcom,pm8008.yaml | 119 +++++++++++++++++++++ > > 1 file changed, 119 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > > > > diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > > new file mode 100644 > > index 0000000..0cafa98 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml > > @@ -0,0 +1,119 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm Technologies, Inc. PM8008 PMIC bindings > > + > > +maintainers: > > + - Guru Das Srinagesh <gurus@codeaurora.org> > > + > > +description: | > > + Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates > > + all the necessary power management, housekeeping, and interface support > > + functions into a single IC. > > + > > +properties: > > + compatible: > > + const: qcom,pm8008 > > + > > + reg: > > + description: > > + I2C slave address. > > + > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + description: Parent interrupt. > > + > > + "#interrupt-cells": > > + const: 2 > > + > > + description: | > > + The first cell is the IRQ number, the second cell is the IRQ trigger > > + flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. > > + > > + interrupt-controller: true > > + > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > +patternProperties: > > + "^pinctrl@[0-9a-f]+$": > > Doesn't look like a pin controller. 'gpio@...' instead. Done. > > > + type: object > > additionalProperties: false Done. Thank you. Guru Das.
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml new file mode 100644 index 0000000..0cafa98 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8008 PMIC bindings + +maintainers: + - Guru Das Srinagesh <gurus@codeaurora.org> + +description: | + Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates + all the necessary power management, housekeeping, and interface support + functions into a single IC. + +properties: + compatible: + const: qcom,pm8008 + + reg: + description: + I2C slave address. + + maxItems: 1 + + interrupts: + maxItems: 1 + + description: Parent interrupt. + + "#interrupt-cells": + const: 2 + + description: | + The first cell is the IRQ number, the second cell is the IRQ trigger + flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h. + + interrupt-controller: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^pinctrl@[0-9a-f]+$": + type: object + + description: | + The GPIO peripheral. This node may be specified twice, one for each GPIO. + + properties: + compatible: + const: qcom,pm8008-gpio + + reg: + description: Peripheral address of one of the two GPIO peripherals. + maxItems: 1 + + gpio-controller: true + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + "#gpio-cells": + const: 2 + + required: + - compatible + - reg + - gpio-controller + - interrupt-controller + - "#gpio-cells" + - "#interrupt-cells" + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/mfd/qcom-pm8008.h> + #include <dt-bindings/interrupt-controller/irq.h> + qupv3_se13_i2c { + #address-cells = <1>; + #size-cells = <0>; + pm8008i@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + + pinctrl@c000 { + compatible = "qcom,pm8008-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + +...
Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> --- .../devicetree/bindings/mfd/qcom,pm8008.yaml | 119 +++++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml