| Message ID | 8abfe44e2ad77b6309866531ec662c5daf1e4dbf.1621518686.git.geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | sms911x: DTS fixes and DT binding to json-schema conversion | expand |
On Thu, May 20, 2021 at 3:58 PM Geert Uytterhoeven <geert+renesas@glider.be> wrote: > make dtbs_check: > > ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$' > ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+' > > There is no "smsc,irq-active-low" property, as active low is the > default. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> I think Bjorn Andersson has to apply this patch. Yours, Linus Walleij
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index dace8ffeb99118cb..0a4ffd10c48464f5 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -581,7 +581,7 @@ external-bus@1a100000 { * EBI2. This has a 25MHz chrystal next to it, so no * clocking is needed. */ - ethernet-ebi2@2,0 { + ethernet@2,0 { compatible = "smsc,lan9221", "smsc,lan9115"; reg = <2 0x0 0x100>; /* @@ -598,8 +598,6 @@ ethernet-ebi2@2,0 { phy-mode = "mii"; reg-io-width = <2>; smsc,force-external-phy; - /* IRQ on edge falling = active low */ - smsc,irq-active-low; smsc,irq-push-pull; /*
make dtbs_check: ethernet-ebi2@2,0: $nodename:0: 'ethernet-ebi2@2,0' does not match '^ethernet(@.*)?$' ethernet-ebi2@2,0: 'smsc,irq-active-low' does not match any of the regexes: 'pinctrl-[0-9]+' There is no "smsc,irq-active-low" property, as active low is the default. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)