| Message ID | 9108372823aba9288b98b1c8a003c21b578d1e13.1553086065.git.amit.kucheria@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | thermal: tsens: Refactor to use regmap_field | expand |
On Wed, Mar 20, 2019 at 6:50 PM Amit Kucheria <amit.kucheria@linaro.org> wrote: > > qcs404 has a single TSENS IP block with 10 sensors. The calibration data > is stored in an eeprom (qfprom) that is accessed through the nvmem > framework. We add the qfprom node to allow the tsens sensors to be > calibrated correctly. > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Hi Bjorn, Could you please pick this patch and patch 22 in this series if you have no other review comments? I can resend these separately if required. The driver (drivers/thermal/qcom/tsens-v1.c) was merged and only these DT changes are pending. Regards, Amit > --- > arch/arm64/boot/dts/qcom/qcs404.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index e8fd26633d57..7881792980b8 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -259,6 +259,16 @@ > reg = <0x00060000 0x6000>; > }; > > + qfprom: qfprom@a4000 { > + compatible = "qcom,qfprom"; > + reg = <0x000a4000 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + tsens_caldata: caldata@d0 { > + reg = <0x1f8 0x14>; > + }; > + }; > + > rng: rng@e3000 { > compatible = "qcom,prng-ee"; > reg = <0x000e3000 0x1000>; > @@ -266,6 +276,16 @@ > clock-names = "core"; > }; > > + tsens: thermal-sensor@4a9000 { > + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; > + reg = <0x004a9000 0x1000>, /* TM */ > + <0x004a8000 0x1000>; /* SROT */ > + nvmem-cells = <&tsens_caldata>; > + nvmem-cell-names = "calib"; > + #qcom,sensors = <10>; > + #thermal-sensor-cells = <1>; > + }; > + > tlmm: pinctrl@1000000 { > compatible = "qcom,qcs404-pinctrl"; > reg = <0x01000000 0x200000>, > -- > 2.17.1 >
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index e8fd26633d57..7881792980b8 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -259,6 +259,16 @@ reg = <0x00060000 0x6000>; }; + qfprom: qfprom@a4000 { + compatible = "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0x1f8 0x14>; + }; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -266,6 +276,16 @@ clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,qcs404-pinctrl"; reg = <0x01000000 0x200000>,
qcs404 has a single TSENS IP block with 10 sensors. The calibration data is stored in an eeprom (qfprom) that is accessed through the nvmem framework. We add the qfprom node to allow the tsens sensors to be calibrated correctly. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)