| Message ID | 9f9cc23d1fd17503c9056d62f7757fb9c412d1f9.1527244201.git.viresh.kumar@linaro.org (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On 25-05-18, 16:02, Viresh Kumar wrote: > The OPP properties, like "operating-points", should either be present > for all the CPUs of a cluster or none. If these are present only for a > subset of CPUs of a cluster then things will start falling apart as soon > as the CPUs are brought online in a different order. For example, this > will happen because the operating system looks for such properties in > the CPU node it is trying to bring up, so that it can create an OPP > table. > > Add such missing properties. > > Fix other missing property (clock latency) as well to make it all > work. > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) Qcom maintainers, can you please apply this one ?
On Fri, May 25, 2018 at 4:02 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote: > The OPP properties, like "operating-points", should either be present > for all the CPUs of a cluster or none. If these are present only for a > subset of CPUs of a cluster then things will start falling apart as soon > as the CPUs are brought online in a different order. For example, this > will happen because the operating system looks for such properties in > the CPU node it is trying to bring up, so that it can create an OPP > table. > > Add such missing properties. > > Fix other missing property (clock latency) as well to make it all > work. > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> FWIW, Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> > --- > arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi > index b25daf368012..8c202b359270 100644 > --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi > +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi > @@ -75,6 +75,14 @@ > reg = <0x1>; > clocks = <&gcc GCC_APPS_CLK_SRC>; > clock-frequency = <0>; > + operating-points = < > + /* kHz uV (fixed) */ > + 48000 1100000 > + 200000 1100000 > + 500000 1100000 > + 666000 1100000 > + >; > + clock-latency = <256000>; > }; > > cpu@2 { > @@ -86,6 +94,14 @@ > reg = <0x2>; > clocks = <&gcc GCC_APPS_CLK_SRC>; > clock-frequency = <0>; > + operating-points = < > + /* kHz uV (fixed) */ > + 48000 1100000 > + 200000 1100000 > + 500000 1100000 > + 666000 1100000 > + >; > + clock-latency = <256000>; > }; > > cpu@3 { > @@ -97,6 +113,14 @@ > reg = <0x3>; > clocks = <&gcc GCC_APPS_CLK_SRC>; > clock-frequency = <0>; > + operating-points = < > + /* kHz uV (fixed) */ > + 48000 1100000 > + 200000 1100000 > + 500000 1100000 > + 666000 1100000 > + >; > + clock-latency = <256000>; > }; > }; > > -- > 2.15.0.194.g9af6a3dea062 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jul 18, 2018 at 03:52:26PM +0530, Amit Kucheria wrote: > On Fri, May 25, 2018 at 4:02 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote: > > The OPP properties, like "operating-points", should either be present > > for all the CPUs of a cluster or none. If these are present only for a > > subset of CPUs of a cluster then things will start falling apart as soon > > as the CPUs are brought online in a different order. For example, this > > will happen because the operating system looks for such properties in > > the CPU node it is trying to bring up, so that it can create an OPP > > table. > > > > Add such missing properties. > > > > Fix other missing property (clock latency) as well to make it all > > work. > > > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> > > FWIW, > Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Picking this up for 4.19. thanks. Andy -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index b25daf368012..8c202b359270 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -75,6 +75,14 @@ reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@2 { @@ -86,6 +94,14 @@ reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; cpu@3 { @@ -97,6 +113,14 @@ reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; + operating-points = < + /* kHz uV (fixed) */ + 48000 1100000 + 200000 1100000 + 500000 1100000 + 666000 1100000 + >; + clock-latency = <256000>; }; };
The OPP properties, like "operating-points", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can create an OPP table. Add such missing properties. Fix other missing property (clock latency) as well to make it all work. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)