@@ -84,13 +84,46 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
return degc;
}
+/**
+ * tsens_hw_to_mC - Return sign-extended temperature in mCelsius.
+ * @s: Pointer to sensor struct
+ * @field: Index into regmap_field array pointing to temperature data
+ *
+ * This function handles temperature returned in ADC code or deciCelsius
+ * depending on IP version.
+ *
+ * Return: Temperature in milliCelsius on success, a negative errno will
+ * be returned in error cases
+ */
+static int tsens_hw_to_mC(struct tsens_sensor *s, int field)
+{
+ struct tsens_priv *priv = s->priv;
+ u32 resolution;
+ u32 temp = 0;
+ int ret;
+
+ resolution = priv->fields[LAST_TEMP_0].msb -
+ priv->fields[LAST_TEMP_0].lsb;
+
+ ret = regmap_field_read(priv->rf[field], &temp);
+ if (ret)
+ return ret;
+
+ /* Convert temperature from ADC code to milliCelsius */
+ if (priv->feat->adc)
+ return code_to_degc(temp, s) * 1000;
+
+ /* deciCelsius -> milliCelsius along with sign extension */
+ return sign_extend32(temp, resolution) * 100;
+}
+
int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
{
struct tsens_priv *priv = s->priv;
int hw_id = s->hw_id;
u32 temp_idx = LAST_TEMP_0 + hw_id;
u32 valid_idx = VALID_0 + hw_id;
- u32 last_temp = 0, valid, mask;
+ u32 valid;
int ret;
ret = regmap_field_read(priv->rf[valid_idx], &valid);
@@ -108,19 +141,7 @@ int get_temp_tsens_valid(struct tsens_sensor *s, int *temp)
}
/* Valid bit is set, OK to read the temperature */
- ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
- if (ret)
- return ret;
-
- if (priv->feat->adc) {
- /* Convert temperature from ADC code to milliCelsius */
- *temp = code_to_degc(last_temp, s) * 1000;
- } else {
- mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
- priv->fields[LAST_TEMP_0].lsb);
- /* Convert temperature from deciCelsius to milliCelsius */
- *temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
- }
+ *temp = tsens_hw_to_mC(s, temp_idx);
return 0;
}
@@ -310,6 +331,7 @@ int __init init_common(struct tsens_priv *priv)
goto err_put_device;
}
}
+
for (i = 0, j = VALID_0; i < priv->feat->max_sensors; i++, j++) {
priv->rf[j] = devm_regmap_field_alloc(dev, priv->tm_map,
priv->fields[j]);
Hide the details of how to convert values read from TSENS HW to mCelsius behind a function. All versions of the IP can be supported as a result. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- drivers/thermal/qcom/tsens-common.c | 50 +++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 14 deletions(-)