diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5dbccf5..96b701f 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -682,6 +682,15 @@ config REGULATOR_QCOM_RPM
 	  Qualcomm RPM as a module. The module will be named
 	  "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_RPMH
+	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
+	depends on QCOM_RPMH || COMPILE_TEST
+	help
+	  This driver supports control of PMIC regulators via the RPMh hardware
+	  block found on Qualcomm Technologies Inc. SoCs.  RPMh regulator
+	  control allows for voting on regulator state between multiple
+	  processors within the SoC.
+
 config REGULATOR_QCOM_SMD_RPM
 	tristate "Qualcomm SMD based RPM regulator driver"
 	depends on QCOM_SMD_RPM
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bd818ce..06e76a6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
+obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
new file mode 100644
index 0000000..b2af35a
--- /dev/null
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -0,0 +1,770 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <soc/qcom/cmd-db.h>
+#include <soc/qcom/rpmh.h>
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/**
+ * enum rpmh_regulator_type - supported RPMh accelerator types
+ * %VRM:	RPMh VRM accelerator which supports voting on enable, voltage,
+ *		and mode of LDO, SMPS, and BOB type PMIC regulators.
+ * %XOB:	RPMh XOB accelerator which supports voting on the enable state
+ *		of PMIC regulators.
+ */
+enum rpmh_regulator_type {
+	VRM,
+	XOB,
+};
+
+#define RPMH_VRM_HEADROOM_MAX_UV		511000
+
+#define RPMH_REGULATOR_REG_VRM_VOLTAGE		0x0
+#define RPMH_REGULATOR_REG_ENABLE		0x4
+#define RPMH_REGULATOR_REG_VRM_MODE		0x8
+#define RPMH_REGULATOR_REG_VRM_HEADROOM		0xC
+
+#define RPMH_REGULATOR_MODE_COUNT		4
+
+#define PMIC4_LDO_MODE_RETENTION		4
+#define PMIC4_LDO_MODE_LPM			5
+#define PMIC4_LDO_MODE_HPM			7
+
+#define PMIC4_SMPS_MODE_RETENTION		4
+#define PMIC4_SMPS_MODE_PFM			5
+#define PMIC4_SMPS_MODE_AUTO			6
+#define PMIC4_SMPS_MODE_PWM			7
+
+#define PMIC4_BOB_MODE_PASS			0
+#define PMIC4_BOB_MODE_PFM			1
+#define PMIC4_BOB_MODE_AUTO			2
+#define PMIC4_BOB_MODE_PWM			3
+
+/**
+ * struct rpmh_vreg_hw_data - RPMh regulator hardware configurations
+ * @regulator_type:		RPMh accelerator type used to manage this
+ *				regulator
+ * @ops:			Pointer to regulator ops callback structure
+ * @voltage_range:		The single range of voltages supported by this
+ *				PMIC regulator type
+ * @n_voltages:			The number of unique voltage set points defined
+ *				by voltage_range
+ * @hpm_min_load_uA:		Minimum load current in microamps that requires
+ *				high power mode (HPM) operation.  This is used
+ *				for LDO hardware type regulators only.
+ * @pmic_mode_map:		Array indexed by regulator framework mode
+ *				containing PMIC hardware modes.  Must be large
+ *				enough to index all framework modes supported
+ *				by this regulator hardware type.
+ * @of_map_mode:		Maps an RPMH_REGULATOR_MODE_* mode value defined
+ *				in device tree to a regulator framework mode
+ */
+struct rpmh_vreg_hw_data {
+	enum rpmh_regulator_type		regulator_type;
+	const struct regulator_ops		*ops;
+	const struct regulator_linear_range	voltage_range;
+	int					n_voltages;
+	int					hpm_min_load_uA;
+	const int				*pmic_mode_map;
+	unsigned int			      (*of_map_mode)(unsigned int mode);
+};
+
+/**
+ * struct rpmh_vreg - individual RPMh regulator data structure encapsulating a
+ *		single regulator device
+ * @dev:			Device pointer for the top-level PMIC RPMh
+ *				regulator parent device.  This is used as a
+ *				handle in RPMh write requests.
+ * @addr:			Base address of the regulator resource within
+ *				an RPMh accelerator
+ * @rdesc:			Regulator descriptor
+ * @hw_data:			PMIC regulator configuration data for this RPMh
+ *				regulator
+ * @always_wait_for_ack:	Boolean flag indicating if a request must always
+ *				wait for an ACK from RPMh before continuing even
+ *				if it corresponds to a strictly lower power
+ *				state (e.g. enabled --> disabled).
+ * @enabled:			Flag indicating if the regulator is enabled or
+ *				not
+ * @bypassed:			Boolean indicating if the regulator is in
+ *				bypass (pass-through) mode or not.  This is
+ *				only used by BOB rpmh-regulator resources.
+ * @voltage_selector:		Selector used for get_voltage_sel() and
+ *				set_voltage_sel() callbacks
+ * @mode:			RPMh VRM regulator current framework mode
+ */
+struct rpmh_vreg {
+	struct device			*dev;
+	u32				addr;
+	struct regulator_desc		rdesc;
+	const struct rpmh_vreg_hw_data	*hw_data;
+	bool				always_wait_for_ack;
+
+	int				enabled;
+	bool				bypassed;
+	int				voltage_selector;
+	unsigned int			mode;
+};
+
+/**
+ * struct rpmh_vreg_init_data - initialization data for an RPMh regulator
+ * @name:			Name for the regulator which also corresponds
+ *				to the device tree subnode name of the regulator
+ * @resource_name:		RPMh regulator resource name format string.
+ *				This must include exactly one field: '%s' which
+ *				is filled at run-time with the PMIC ID provided
+ *				by device tree property qcom,pmic-id.  Example:
+ *				"ldo%s1" for RPMh resource "ldoa1".
+ * @supply_name:		Parent supply regulator name
+ * @hw_data:			Configuration data for this PMIC regulator type
+ */
+struct rpmh_vreg_init_data {
+	const char			*name;
+	const char			*resource_name;
+	const char			*supply_name;
+	const struct rpmh_vreg_hw_data	*hw_data;
+};
+
+/**
+ * rpmh_regulator_send_request() - send the request to RPMh
+ * @vreg:		Pointer to the RPMh regulator
+ * @cmd:		RPMh commands to send
+ * @count:		Size of cmd array
+ * @wait_for_ack:	Boolean indicating if execution must wait until the
+ *			request has been acknowledged as complete
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_send_request(struct rpmh_vreg *vreg,
+			struct tcs_cmd *cmd, int count, bool wait_for_ack)
+{
+	int ret;
+
+	if (wait_for_ack || vreg->always_wait_for_ack)
+		ret = rpmh_write(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd, count);
+	else
+		ret = rpmh_write_async(vreg->dev, RPMH_ACTIVE_ONLY_STATE, cmd,
+					count);
+
+	return ret;
+}
+
+static int _rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+				unsigned int selector, bool wait_for_ack)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_VRM_VOLTAGE,
+	};
+	int ret;
+
+	/* VRM voltage control register is set with voltage in millivolts. */
+	cmd.data = DIV_ROUND_UP(regulator_list_voltage_linear_range(rdev,
+							selector), 1000);
+
+	ret = rpmh_regulator_send_request(vreg, &cmd, 1, wait_for_ack);
+	if (!ret)
+		vreg->voltage_selector = selector;
+
+	return 0;
+}
+
+static int rpmh_regulator_vrm_set_voltage_sel(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	if (vreg->enabled == -EINVAL) {
+		/*
+		 * Cache the voltage and send it later when the regulator is
+		 * enabled or disabled.
+		 */
+		vreg->voltage_selector = selector;
+		return 0;
+	}
+
+	return _rpmh_regulator_vrm_set_voltage_sel(rdev, selector,
+					selector > vreg->voltage_selector);
+}
+
+static int rpmh_regulator_vrm_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->voltage_selector;
+}
+
+static int rpmh_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->enabled;
+}
+
+static int rpmh_regulator_enable(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+		.data = 1,
+	};
+	int ret;
+
+	if (vreg->enabled == -EINVAL &&
+	    vreg->voltage_selector != -ENOTRECOVERABLE) {
+		ret = _rpmh_regulator_vrm_set_voltage_sel(rdev,
+						vreg->voltage_selector, true);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = rpmh_regulator_send_request(vreg, &cmd, 1, true);
+	if (!ret)
+		vreg->enabled = true;
+
+	return ret;
+}
+
+static int rpmh_regulator_disable(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_ENABLE,
+		.data = 0,
+	};
+	int ret;
+
+	if (vreg->enabled == -EINVAL &&
+	    vreg->voltage_selector != -ENOTRECOVERABLE) {
+		ret = _rpmh_regulator_vrm_set_voltage_sel(rdev,
+						vreg->voltage_selector, true);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = rpmh_regulator_send_request(vreg, &cmd, 1, false);
+	if (!ret)
+		vreg->enabled = false;
+
+	return ret;
+}
+
+static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
+					unsigned int mode, bool bypassed)
+{
+	struct tcs_cmd cmd = {
+		.addr = vreg->addr + RPMH_REGULATOR_REG_VRM_MODE,
+	};
+	int pmic_mode;
+
+	if (mode > REGULATOR_MODE_STANDBY)
+		return -EINVAL;
+
+	pmic_mode = vreg->hw_data->pmic_mode_map[mode];
+	if (pmic_mode < 0)
+		return pmic_mode;
+
+	cmd.data = bypassed ? PMIC4_BOB_MODE_PASS : pmic_mode;
+
+	return rpmh_regulator_send_request(vreg, &cmd, 1, true);
+}
+
+static int rpmh_regulator_vrm_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (mode == vreg->mode)
+		return 0;
+
+	ret = rpmh_regulator_vrm_set_mode_bypass(vreg, mode, vreg->bypassed);
+	if (!ret)
+		vreg->mode = mode;
+
+	return ret;
+}
+
+static unsigned int rpmh_regulator_vrm_get_mode(struct regulator_dev *rdev)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	return vreg->mode;
+}
+
+/**
+ * rpmh_regulator_vrm_set_load() - set the regulator mode based upon the load
+ *		current requested
+ * @rdev:		Regulator device pointer for the rpmh-regulator
+ * @load_uA:		Aggregated load current in microamps
+ *
+ * This function is used in the regulator_ops for VRM type RPMh regulator
+ * devices.
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_vrm_set_load(struct regulator_dev *rdev, int load_uA)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	unsigned int mode;
+
+	if (load_uA >= vreg->hw_data->hpm_min_load_uA)
+		mode = REGULATOR_MODE_FAST;
+	else
+		mode = REGULATOR_MODE_IDLE;
+
+	return rpmh_regulator_vrm_set_mode(rdev, mode);
+}
+
+static int rpmh_regulator_vrm_set_bypass(struct regulator_dev *rdev,
+				bool enable)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (vreg->bypassed == enable)
+		return 0;
+
+	ret = rpmh_regulator_vrm_set_mode_bypass(vreg, vreg->mode, enable);
+	if (!ret)
+		vreg->bypassed = enable;
+
+	return ret;
+}
+
+static int rpmh_regulator_vrm_get_bypass(struct regulator_dev *rdev,
+				bool *enable)
+{
+	struct rpmh_vreg *vreg = rdev_get_drvdata(rdev);
+
+	*enable = vreg->bypassed;
+
+	return 0;
+}
+
+static const struct regulator_ops rpmh_regulator_vrm_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+	.set_voltage_sel	= rpmh_regulator_vrm_set_voltage_sel,
+	.get_voltage_sel	= rpmh_regulator_vrm_get_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_mode		= rpmh_regulator_vrm_set_mode,
+	.get_mode		= rpmh_regulator_vrm_get_mode,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_drms_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+	.set_voltage_sel	= rpmh_regulator_vrm_set_voltage_sel,
+	.get_voltage_sel	= rpmh_regulator_vrm_get_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_mode		= rpmh_regulator_vrm_set_mode,
+	.get_mode		= rpmh_regulator_vrm_get_mode,
+	.set_load		= rpmh_regulator_vrm_set_load,
+};
+
+static const struct regulator_ops rpmh_regulator_vrm_bypass_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+	.set_voltage_sel	= rpmh_regulator_vrm_set_voltage_sel,
+	.get_voltage_sel	= rpmh_regulator_vrm_get_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.set_mode		= rpmh_regulator_vrm_set_mode,
+	.get_mode		= rpmh_regulator_vrm_get_mode,
+	.set_bypass		= rpmh_regulator_vrm_set_bypass,
+	.get_bypass		= rpmh_regulator_vrm_get_bypass,
+};
+
+static const struct regulator_ops rpmh_regulator_xob_ops = {
+	.enable			= rpmh_regulator_enable,
+	.disable		= rpmh_regulator_disable,
+	.is_enabled		= rpmh_regulator_is_enabled,
+};
+
+/**
+ * rpmh_regulator_init_vreg() - initialize all attributes of an rpmh-regulator
+ * vreg:		Pointer to the individual rpmh-regulator resource
+ * dev:			Pointer to the top level rpmh-regulator PMIC device
+ * node:		Pointer to the individual rpmh-regulator resource
+ *			device node
+ * pmic_id:		String used to identify the top level rpmh-regulator
+ *			PMIC device on the board
+ * rpmh_data:		Pointer to a null-terminated array of rpmh-regulator
+ *			resources defined for the top level PMIC device
+ *
+ * Return: 0 on success, errno on failure
+ */
+static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
+				struct device_node *node, const char *pmic_id,
+				const struct rpmh_vreg_init_data *rpmh_data)
+{
+	struct regulator_config reg_config = {};
+	char rpmh_resource_name[20] = "";
+	struct regulator_dev *rdev;
+	struct regulator_init_data *init_data;
+	int ret;
+
+	vreg->dev = dev;
+
+	for (; rpmh_data->name; rpmh_data++)
+		if (!strcmp(rpmh_data->name, node->name))
+			break;
+
+	if (!rpmh_data->name) {
+		dev_err(dev, "Unknown regulator %s\n", node->name);
+		return -EINVAL;
+	}
+
+	scnprintf(rpmh_resource_name, sizeof(rpmh_resource_name),
+		rpmh_data->resource_name, pmic_id);
+
+	vreg->addr = cmd_db_read_addr(rpmh_resource_name);
+	if (!vreg->addr) {
+		dev_err(dev, "%s: could not find RPMh address for resource %s\n",
+			node->name, rpmh_resource_name);
+		return -ENODEV;
+	}
+
+	vreg->rdesc.name = rpmh_data->name;
+	vreg->rdesc.supply_name = rpmh_data->supply_name;
+	vreg->hw_data = rpmh_data->hw_data;
+
+	vreg->enabled = -EINVAL;
+	vreg->voltage_selector = -ENOTRECOVERABLE;
+	vreg->mode = REGULATOR_MODE_INVALID;
+
+	if (rpmh_data->hw_data->n_voltages) {
+		vreg->rdesc.linear_ranges = &rpmh_data->hw_data->voltage_range;
+		vreg->rdesc.n_linear_ranges = 1;
+		vreg->rdesc.n_voltages = rpmh_data->hw_data->n_voltages;
+	}
+
+	vreg->always_wait_for_ack = of_property_read_bool(node,
+						"qcom,always-wait-for-ack");
+
+	vreg->rdesc.owner	= THIS_MODULE;
+	vreg->rdesc.type	= REGULATOR_VOLTAGE;
+	vreg->rdesc.ops		= vreg->hw_data->ops;
+	vreg->rdesc.of_map_mode	= vreg->hw_data->of_map_mode;
+
+	init_data = of_get_regulator_init_data(dev, node, &vreg->rdesc);
+	if (!init_data)
+		return -ENOMEM;
+
+	if (rpmh_data->hw_data->regulator_type == XOB &&
+	    init_data->constraints.min_uV &&
+	    init_data->constraints.min_uV == init_data->constraints.max_uV) {
+		vreg->rdesc.fixed_uV = init_data->constraints.min_uV;
+		vreg->rdesc.n_voltages = 1;
+	}
+
+	reg_config.dev		= dev;
+	reg_config.init_data	= init_data;
+	reg_config.of_node	= node;
+	reg_config.driver_data	= vreg;
+
+	rdev = devm_regulator_register(dev, &vreg->rdesc, &reg_config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		rdev = NULL;
+		dev_err(dev, "%s: devm_regulator_register() failed, ret=%d\n",
+			node->name, ret);
+		return ret;
+	}
+
+	dev_dbg(dev, "%s regulator registered for RPMh resource %s @ 0x%05X\n",
+		node->name, rpmh_resource_name, vreg->addr);
+
+	return 0;
+}
+
+static const int pmic_mode_map_pmic4_ldo[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC4_LDO_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC4_LDO_MODE_LPM,
+	[REGULATOR_MODE_NORMAL]  = -EINVAL,
+	[REGULATOR_MODE_FAST]    = PMIC4_LDO_MODE_HPM,
+};
+
+static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int mode)
+{
+	static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
+		[RPMH_REGULATOR_MODE_RET]  = REGULATOR_MODE_STANDBY,
+		[RPMH_REGULATOR_MODE_LPM]  = REGULATOR_MODE_IDLE,
+		[RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_INVALID,
+		[RPMH_REGULATOR_MODE_HPM]  = REGULATOR_MODE_FAST,
+	};
+
+	if (mode >= RPMH_REGULATOR_MODE_COUNT)
+		return -EINVAL;
+
+	return of_mode_map[mode];
+}
+
+static const int pmic_mode_map_pmic4_smps[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = PMIC4_SMPS_MODE_RETENTION,
+	[REGULATOR_MODE_IDLE]    = PMIC4_SMPS_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC4_SMPS_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC4_SMPS_MODE_PWM,
+};
+
+static unsigned int rpmh_regulator_pmic4_smps_of_map_mode(unsigned int mode)
+{
+	static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
+		[RPMH_REGULATOR_MODE_RET]  = REGULATOR_MODE_STANDBY,
+		[RPMH_REGULATOR_MODE_LPM]  = REGULATOR_MODE_IDLE,
+		[RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_NORMAL,
+		[RPMH_REGULATOR_MODE_HPM]  = REGULATOR_MODE_FAST,
+	};
+
+	if (mode >= RPMH_REGULATOR_MODE_COUNT)
+		return -EINVAL;
+
+	return of_mode_map[mode];
+}
+
+static const int pmic_mode_map_pmic4_bob[REGULATOR_MODE_STANDBY + 1] = {
+	[REGULATOR_MODE_INVALID] = -EINVAL,
+	[REGULATOR_MODE_STANDBY] = -EINVAL,
+	[REGULATOR_MODE_IDLE]    = PMIC4_BOB_MODE_PFM,
+	[REGULATOR_MODE_NORMAL]  = PMIC4_BOB_MODE_AUTO,
+	[REGULATOR_MODE_FAST]    = PMIC4_BOB_MODE_PWM,
+};
+
+static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int mode)
+{
+	static const unsigned int of_mode_map[RPMH_REGULATOR_MODE_COUNT] = {
+		[RPMH_REGULATOR_MODE_RET]  = REGULATOR_MODE_INVALID,
+		[RPMH_REGULATOR_MODE_LPM]  = REGULATOR_MODE_IDLE,
+		[RPMH_REGULATOR_MODE_AUTO] = REGULATOR_MODE_NORMAL,
+		[RPMH_REGULATOR_MODE_HPM]  = REGULATOR_MODE_FAST,
+	};
+
+	if (mode >= RPMH_REGULATOR_MODE_COUNT)
+		return -EINVAL;
+
+	return of_mode_map[mode];
+}
+
+static const struct rpmh_vreg_hw_data pmic4_pldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1664000, 0, 255, 8000),
+	.n_voltages = 256,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_pldo_lv = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1256000, 0, 127, 8000),
+	.n_voltages = 128,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_nldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+	.n_voltages = 128,
+	.hpm_min_load_uA = 30000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_hfsmps3 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+	.n_voltages = 216,
+	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_ftsmps426 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
+	.n_voltages = 259,
+	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_bob = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_bypass_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1824000, 0, 83, 32000),
+	.n_voltages = 84,
+	.pmic_mode_map = pmic_mode_map_pmic4_bob,
+	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic4_lvs = {
+	.regulator_type = XOB,
+	.ops = &rpmh_regulator_xob_ops,
+	/* LVS hardware does not support voltage or mode configuration. */
+};
+
+#define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
+{ \
+	.name		= _name, \
+	.resource_name	= _resource_name, \
+	.hw_data	= _hw_data, \
+	.supply_name	= _supply_name, \
+}
+
+static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic4_ftsmps426, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic4_hfsmps3,   "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic4_hfsmps3,   "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic4_hfsmps3,   "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic4_ftsmps426, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic4_ftsmps426, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic4_ftsmps426, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic4_ftsmps426, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic4_ftsmps426, "vdd-s10"),
+	RPMH_VREG("smps11", "smp%s11", &pmic4_ftsmps426, "vdd-s11"),
+	RPMH_VREG("smps12", "smp%s12", &pmic4_ftsmps426, "vdd-s12"),
+	RPMH_VREG("smps13", "smp%s13", &pmic4_ftsmps426, "vdd-s13"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic4_nldo,      "vdd-l1-l27"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic4_nldo,      "vdd-l2-l8-l17"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic4_nldo,      "vdd-l3-l11"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic4_nldo,      "vdd-l4-l5"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic4_nldo,      "vdd-l4-l5"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic4_pldo,      "vdd-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic4_nldo,      "vdd-l2-l8-l17"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic4_pldo,      "vdd-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic4_pldo,      "vdd-l10-l23-l25"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic4_nldo,      "vdd-l3-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic4_pldo,      "vdd-l13-l19-l21"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic4_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic4_pldo,      "vdd-l16-l28"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic4_nldo,      "vdd-l2-l8-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic4_pldo,      "vdd-l18-l22"),
+	RPMH_VREG("ldo19",  "ldo%s19", &pmic4_pldo,      "vdd-l13-l19-l21"),
+	RPMH_VREG("ldo20",  "ldo%s20", &pmic4_pldo,      "vdd-l20-l24"),
+	RPMH_VREG("ldo21",  "ldo%s21", &pmic4_pldo,      "vdd-l13-l19-l21"),
+	RPMH_VREG("ldo22",  "ldo%s22", &pmic4_pldo,      "vdd-l18-l22"),
+	RPMH_VREG("ldo23",  "ldo%s23", &pmic4_pldo,      "vdd-l10-l23-l25"),
+	RPMH_VREG("ldo24",  "ldo%s24", &pmic4_pldo,      "vdd-l20-l24"),
+	RPMH_VREG("ldo25",  "ldo%s25", &pmic4_pldo,      "vdd-l10-l23-l25"),
+	RPMH_VREG("ldo26",  "ldo%s26", &pmic4_nldo,      "vdd-l26"),
+	RPMH_VREG("ldo27",  "ldo%s27", &pmic4_nldo,      "vdd-l1-l27"),
+	RPMH_VREG("ldo28",  "ldo%s28", &pmic4_pldo,      "vdd-l16-l28"),
+	RPMH_VREG("lvs1",   "vs%s1",   &pmic4_lvs,       "vin-lvs-1-2"),
+	RPMH_VREG("lvs2",   "vs%s2",   &pmic4_lvs,       "vin-lvs-1-2"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
+	RPMH_VREG("bob",    "bob%s1",  &pmic4_bob,       "vdd-bob"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic4_ftsmps426, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic4_ftsmps426, "vdd-s4"),
+	{},
+};
+
+static int rpmh_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct rpmh_vreg_init_data *vreg_data;
+	struct device_node *node;
+	struct rpmh_vreg *vreg;
+	const char *pmic_id;
+	int ret;
+
+	ret = cmd_db_ready();
+	if (ret < 0) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Command DB not available, ret=%d\n", ret);
+		return ret;
+	}
+
+	vreg_data = of_device_get_match_data(dev);
+	if (!vreg_data)
+		return -ENODEV;
+
+	ret = of_property_read_string(dev->of_node, "qcom,pmic-id", &pmic_id);
+	if (ret < 0) {
+		dev_err(dev, "qcom,pmic-id missing in DT node\n");
+		return ret;
+	}
+
+	for_each_available_child_of_node(dev->of_node, node) {
+		vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
+		if (!vreg) {
+			of_node_put(node);
+			return -ENOMEM;
+		}
+
+		ret = rpmh_regulator_init_vreg(vreg, dev, node, pmic_id,
+						vreg_data);
+		if (ret < 0) {
+			of_node_put(node);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id rpmh_regulator_match_table[] = {
+	{
+		.compatible = "qcom,pm8998-rpmh-regulators",
+		.data = pm8998_vreg_data,
+	},
+	{
+		.compatible = "qcom,pmi8998-rpmh-regulators",
+		.data = pmi8998_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8005-rpmh-regulators",
+		.data = pm8005_vreg_data,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
+
+static struct platform_driver rpmh_regulator_driver = {
+	.driver = {
+		.name = "qcom-rpmh-regulator",
+		.of_match_table	= of_match_ptr(rpmh_regulator_match_table),
+	},
+	.probe = rpmh_regulator_probe,
+};
+module_platform_driver(rpmh_regulator_driver);
+
+MODULE_DESCRIPTION("Qualcomm RPMh regulator driver");
+MODULE_LICENSE("GPL v2");
