diff mbox series

[v2,2/3] dt-bindings: mfd: Add QCOM PM8008 MFD bindings

Message ID b224632c03055a92022edb5929f22f26db66bc6d.1603402280.git.gurus@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series Add support for Qualcomm MFD PMIC register layout | expand

Commit Message

Guru Das Srinagesh Oct. 22, 2020, 9:35 p.m. UTC 
Add device tree bindings for the driver for Qualcomm Technology Inc.'s
PM8008 MFD PMIC.

Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
---
 .../bindings/mfd/qcom,pm8008-irqchip.yaml          | 102 +++++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml

Comments

Rob Herring Oct. 30, 2020, 3:49 p.m. UTC | #1 
On Thu, Oct 22, 2020 at 02:35:41PM -0700, Guru Das Srinagesh wrote:
> Add device tree bindings for the driver for Qualcomm Technology Inc.'s
> PM8008 MFD PMIC.
> 
> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> ---
>  .../bindings/mfd/qcom,pm8008-irqchip.yaml          | 102 +++++++++++++++++++++
>  1 file changed, 102 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
> new file mode 100644
> index 0000000..31d7b68
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/qcom,pm8008-irqchip.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. PM8008 Multi-Function Device PMIC
> +
> +maintainers:
> +  - Guru Das Srinagesh <gurus@codeaurora.org>
> +
> +description: |
> +  PM8008 is a PMIC that contains 7 LDOs, 2 GPIOs, temperature monitoring, and
> +  can be interfaced over I2C.

No bindings for all those functions? Bindings should be complete.

> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,pm8008-irqchip

Why irqchip?

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupt-names:
> +    items:
> +      - const: pm8008
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#address-cells":
> +    const: 1
> +    description: Must be specified if child nodes are specified.
> +
> +  "#size-cells":
> +    const: 0
> +    description: Must be specified if child nodes are specified.
> +
> +  "#interrupt-cells":
> +    const: 2
> +    description: |
> +      The first cell is the IRQ number, the second cell is the IRQ trigger flag.
> +
> +patternProperties:
> +  "^.*@[0-9a-f]+$":

'^.*' can be dropped. That's redundant.

> +    type: object
> +    # Each peripheral in PM8008 must be represented as a child node with an
> +    # optional label for referencing as phandle elsewhere. This is optional.
> +    properties:
> +      compatible:
> +        description: The compatible string for the peripheral's driver.
> +
> +      reg:
> +        maxItems: 1

What does the address represent? It's non-standard, so it needs to be 
defined.

> +
> +      interrupts:
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - interrupts
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    qupv3_se13_i2c {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            pm8008i@8 {
> +                    compatible = "qcom,pm8008-irqchip";
> +                    reg = <0x8>;
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    interrupt-controller;
> +                    #interrupt-cells = <2>;
> +
> +                    interrupt-names = "pm8008";
> +                    interrupt-parent = <&tlmm>;
> +                    interrupts = <32 IRQ_TYPE_EDGE_RISING>;
> +
> +                    pm8008_tz: qcom,temp-alarm@2400 {

Must be documented.

And don't use vendor prefixes in node names. 

> +                            compatible = "qcom,spmi-temp-alarm";
> +                            reg = <0x2400>;
> +                            interrupts = <0x5 IRQ_TYPE_EDGE_BOTH>;
> +                            #thermal-sensor-cells = <0>;
> +                    };
> +            };
> +    };
> +
> +...
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
Guru Das Srinagesh Nov. 2, 2020, 7:52 p.m. UTC | #2 
On Fri, Oct 30, 2020 at 10:49:00AM -0500, Rob Herring wrote:
> On Thu, Oct 22, 2020 at 02:35:41PM -0700, Guru Das Srinagesh wrote:
> > Add device tree bindings for the driver for Qualcomm Technology Inc.'s
> > PM8008 MFD PMIC.
> > 
> > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> > ---
> >  .../bindings/mfd/qcom,pm8008-irqchip.yaml          | 102 +++++++++++++++++++++
> >  1 file changed, 102 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
> > new file mode 100644
> > index 0000000..31d7b68
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
> > @@ -0,0 +1,102 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/qcom,pm8008-irqchip.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Technologies, Inc. PM8008 Multi-Function Device PMIC
> > +
> > +maintainers:
> > +  - Guru Das Srinagesh <gurus@codeaurora.org>
> > +
> > +description: |
> > +  PM8008 is a PMIC that contains 7 LDOs, 2 GPIOs, temperature monitoring, and
> > +  can be interfaced over I2C.
> 
> No bindings for all those functions? Bindings should be complete.

While pushing out this patchset, I accidentally dropped the "RFC" tag in
the mail subjects. This driver and binding document are meant to be just
an exemplar for how the framework changes would be used, and hence I
felt adding only a single node would suffice for illustration purposes.

> 
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: qcom,pm8008-irqchip
> 
> Why irqchip?

Since the driver's main functions are to register with the regmap-irq
framework and to pass a regmap to the child nodes it populates. Would
"qcom,pm8008-mfd" be more appropriate?

> 
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: pm8008
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  interrupt-controller: true
> > +
> > +  "#address-cells":
> > +    const: 1
> > +    description: Must be specified if child nodes are specified.
> > +
> > +  "#size-cells":
> > +    const: 0
> > +    description: Must be specified if child nodes are specified.
> > +
> > +  "#interrupt-cells":
> > +    const: 2
> > +    description: |
> > +      The first cell is the IRQ number, the second cell is the IRQ trigger flag.
> > +
> > +patternProperties:
> > +  "^.*@[0-9a-f]+$":
> 
> '^.*' can be dropped. That's redundant.

Done.

> 
> > +    type: object
> > +    # Each peripheral in PM8008 must be represented as a child node with an
> > +    # optional label for referencing as phandle elsewhere. This is optional.
> > +    properties:
> > +      compatible:
> > +        description: The compatible string for the peripheral's driver.
> > +
> > +      reg:
> > +        maxItems: 1
> 
> What does the address represent? It's non-standard, so it needs to be 
> defined.

Will add description.

> 
> > +
> > +      interrupts:
> > +        maxItems: 1
> > +
> > +    required:
> > +      - compatible
> > +      - reg
> > +      - interrupts
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - "#interrupt-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    qupv3_se13_i2c {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            pm8008i@8 {
> > +                    compatible = "qcom,pm8008-irqchip";
> > +                    reg = <0x8>;
> > +                    #address-cells = <1>;
> > +                    #size-cells = <0>;
> > +                    interrupt-controller;
> > +                    #interrupt-cells = <2>;
> > +
> > +                    interrupt-names = "pm8008";
> > +                    interrupt-parent = <&tlmm>;
> > +                    interrupts = <32 IRQ_TYPE_EDGE_RISING>;
> > +
> > +                    pm8008_tz: qcom,temp-alarm@2400 {
> 
> Must be documented.
> 
> And don't use vendor prefixes in node names. 

Done.

> 
> > +                            compatible = "qcom,spmi-temp-alarm";
> > +                            reg = <0x2400>;
> > +                            interrupts = <0x5 IRQ_TYPE_EDGE_BOTH>;
> > +                            #thermal-sensor-cells = <0>;
> > +                    };
> > +            };
> > +    };
> > +
> > +...
> > -- 
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> > a Linux Foundation Collaborative Project
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
new file mode 100644
index 0000000..31d7b68
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008-irqchip.yaml
@@ -0,0 +1,102 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,pm8008-irqchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8008 Multi-Function Device PMIC
+
+maintainers:
+  - Guru Das Srinagesh <gurus@codeaurora.org>
+
+description: |
+  PM8008 is a PMIC that contains 7 LDOs, 2 GPIOs, temperature monitoring, and
+  can be interfaced over I2C.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,pm8008-irqchip
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: pm8008
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells":
+    const: 1
+    description: Must be specified if child nodes are specified.
+
+  "#size-cells":
+    const: 0
+    description: Must be specified if child nodes are specified.
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      The first cell is the IRQ number, the second cell is the IRQ trigger flag.
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    # Each peripheral in PM8008 must be represented as a child node with an
+    # optional label for referencing as phandle elsewhere. This is optional.
+    properties:
+      compatible:
+        description: The compatible string for the peripheral's driver.
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    qupv3_se13_i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pm8008i@8 {
+                    compatible = "qcom,pm8008-irqchip";
+                    reg = <0x8>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    interrupt-controller;
+                    #interrupt-cells = <2>;
+
+                    interrupt-names = "pm8008";
+                    interrupt-parent = <&tlmm>;
+                    interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+
+                    pm8008_tz: qcom,temp-alarm@2400 {
+                            compatible = "qcom,spmi-temp-alarm";
+                            reg = <0x2400>;
+                            interrupts = <0x5 IRQ_TYPE_EDGE_BOTH>;
+                            #thermal-sensor-cells = <0>;
+                    };
+            };
+    };
+
+...