| Message ID | cb26ad4a6550c18b1a70104c6b75c10946766944.1684920389.git.quic_varada@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable IPQ9574 TSENS support | expand |
On Wed, May 24, 2023 at 03:06:09PM +0530, Varadarajan Narayanan wrote: > From: Praveenkumar I <quic_ipkumar@quicinc.com> > > Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens. > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > [v4]: > Add description about IPQ9574 and remove unnecessary > additions to the file > [v3]: > Fix dt_binding_check & dtbs_check errors (Used > Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml > as reference/example) > > Drop 'Acked-by: Rob Herring' as suggested in review > > [v2]: > Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > for the tip to make qcom,ipq8074-tsens as fallback. Thanks for re-sending. I'm going to "ignore" this patch & Krzysztof can take a look at it next week. Cheers, Conor. > --- > Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > index d1ec963..1a752e0 100644 > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > @@ -16,9 +16,14 @@ description: | > The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures > everything before v1 when there was no versioning information. > > + Since IPQ9574 is similar to IPQ8074, mapping it to IPQ8074 without > + introducing a new compatible. > + > properties: > compatible: > oneOf: > + - const: qcom,ipq8074-tsens > + > - description: msm8960 TSENS based > items: > - enum: > @@ -64,8 +69,10 @@ properties: > - const: qcom,tsens-v2 > > - description: v2 of TSENS with combined interrupt > - enum: > - - qcom,ipq8074-tsens > + items: > + - enum: > + - qcom,ipq9574-tsens > + - const: qcom,ipq8074-tsens > > reg: > items: > -- > 2.7.4 >
On 24/05/2023 11:36, Varadarajan Narayanan wrote: > From: Praveenkumar I <quic_ipkumar@quicinc.com> > > Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens. > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > [v4]: > Add description about IPQ9574 and remove unnecessary > additions to the file > [v3]: > Fix dt_binding_check & dtbs_check errors (Used > Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml > as reference/example) > > Drop 'Acked-by: Rob Herring' as suggested in review > > [v2]: > Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > for the tip to make qcom,ipq8074-tsens as fallback. > --- > Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > index d1ec963..1a752e0 100644 > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml > @@ -16,9 +16,14 @@ description: | > The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures > everything before v1 when there was no versioning information. > > + Since IPQ9574 is similar to IPQ8074, mapping it to IPQ8074 without > + introducing a new compatible. > + > properties: > compatible: > oneOf: > + - const: qcom,ipq8074-tsens No, no need to move it to const. Was correct before. > + > - description: msm8960 TSENS based > items: > - enum: > @@ -64,8 +69,10 @@ properties: > - const: qcom,tsens-v2 > > - description: v2 of TSENS with combined interrupt > - enum: > - - qcom,ipq8074-tsens Again, "-" means you remove a diff hunk. `man diff` and `man patch` (or Wikipedia, dunno). > + items: > + - enum: > + - qcom,ipq9574-tsens > + - const: qcom,ipq8074-tsens No, do not touch existing entry. You need new item on entire list with two compatibles: + items: + - enum: + - qcom,ipq9574-tsens + - const: qcom,ipq8074-tsens That's it. There should be no removal hunks in your diff (so one with "-"). Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index d1ec963..1a752e0 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -16,9 +16,14 @@ description: | The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures everything before v1 when there was no versioning information. + Since IPQ9574 is similar to IPQ8074, mapping it to IPQ8074 without + introducing a new compatible. + properties: compatible: oneOf: + - const: qcom,ipq8074-tsens + - description: msm8960 TSENS based items: - enum: @@ -64,8 +69,10 @@ properties: - const: qcom,tsens-v2 - description: v2 of TSENS with combined interrupt - enum: - - qcom,ipq8074-tsens + items: + - enum: + - qcom,ipq9574-tsens + - const: qcom,ipq8074-tsens reg: items: