@@ -37,7 +37,7 @@ Required properties:
or generalized "qcom,spmi-pmic".
- reg: Specifies the SPMI USID slave address for this device.
For more information see:
- Documentation/devicetree/bindings/spmi/spmi.txt
+ Documentation/devicetree/bindings/spmi/spmi.yaml
Required properties for peripheral child nodes:
- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name.
@@ -7,8 +7,8 @@ devices to control a single SPMI master.
The PMIC Arbiter can also act as an interrupt controller, providing interrupts
to slave devices.
-See spmi.txt for the generic SPMI controller binding requirements for child
-nodes.
+See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
+controller binding requirements for child nodes.
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
generic interrupt controller binding documentation.
deleted file mode 100644
@@ -1,41 +0,0 @@
-System Power Management Interface (SPMI) Controller
-
-This document defines a generic set of bindings for use by SPMI controllers. A
-controller is modelled in device tree as a node with zero or more child nodes,
-each representing a unique slave on the bus.
-
-Required properties:
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-
-Child nodes:
-
-An SPMI controller node can contain zero or more child nodes representing slave
-devices on the bus. Child 'reg' properties are specified as an address, type
-pair. The address must be in the range 0-15 (4 bits). The type must be one of
-SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
-These are the identifiers "statically assigned by the system integrator", as
-per the SPMI spec.
-
-Each child node must have one and only one 'reg' entry of type SPMI_USID.
-
-#include <dt-bindings/spmi/spmi.h>
-
- spmi@.. {
- compatible = "...";
- reg = <...>;
-
- #address-cells = <2>;
- #size-cells = <0>;
-
- child@0 {
- compatible = "...";
- reg = <0 SPMI_USID>;
- };
-
- child@7 {
- compatible = "...";
- reg = <7 SPMI_USID
- 3 SPMI_GSID>;
- };
- };
new file mode 100644
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/spmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Power Management Interface (SPMI) Controller
+
+maintainers:
+ - Josh Cartwright <joshc@codeaurora.org>
+
+description: |
+ The System Power Management (SPMI) controller is a 2-wire bus defined
+ by the MIPI Alliance for power management control to be used on SoC designs.
+
+ SPMI controllers are modelled in device tree using a generic set of
+ bindings defined here, plus any bus controller specific properties, if
+ needed.
+
+ Each SPMI controller has zero or more child nodes (up to 16 ones), each
+ one representing an unique slave at the bus.
+
+properties:
+ $nodename:
+ pattern: "spmi@.*"
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ ".*@([0-9]|1[0-5])$":
+ description: up to 16 child PMIC nodes
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - minimum: 0
+ maximum: 0xf
+ - enum: [ 0 ]
+ description: |
+ 0 means user ID address. 1 is reserved for group ID address.
+
+ required:
+ - reg
+
+required:
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/spmi/spmi.h>
+
+ spmi@0 {
+ reg = <0 0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ child@0 {
+ reg = <0 SPMI_USID>;
+ };
+
+ child@7 {
+ reg = <7 SPMI_USID>;
+ };
+ };
Convert the SPMI bus documentation to JSON/yaml. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- v2: - addressed issues pointed by Rob; - made clear that group ID is a future extension, that it is not currently supported. .../bindings/mfd/qcom,spmi-pmic.txt | 2 +- .../bindings/spmi/qcom,spmi-pmic-arb.txt | 4 +- .../devicetree/bindings/spmi/spmi.txt | 41 ---------- .../devicetree/bindings/spmi/spmi.yaml | 75 +++++++++++++++++++ 4 files changed, 78 insertions(+), 44 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spmi/spmi.txt create mode 100644 Documentation/devicetree/bindings/spmi/spmi.yaml