@@ -3,6 +3,7 @@
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/nvmem-consumer.h>
@@ -139,6 +140,77 @@ int get_temp_common(struct tsens_sensor *s, int *temp)
return 0;
}
+#ifdef CONFIG_DEBUG_FS
+static int dbg_sensors_show(struct seq_file *s, void *data)
+{
+ struct platform_device *pdev = s->private;
+ struct tsens_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ seq_printf(s, "max: %2d\nnum: %2d\n\n",
+ priv->feat->max_sensors, priv->num_sensors);
+
+ seq_puts(s, " id slope offset\n--------------------------\n");
+ for (i = 0; i < priv->num_sensors; i++) {
+ seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id,
+ priv->sensor[i].slope, priv->sensor[i].offset);
+ }
+
+ return 0;
+}
+
+static int dbg_version_show(struct seq_file *s, void *data)
+{
+ struct platform_device *pdev = s->private;
+ struct tsens_priv *priv = platform_get_drvdata(pdev);
+ u32 maj_ver, min_ver, step_ver;
+ int ret;
+
+ if (tsens_ver(priv) > VER_0_1) {
+ ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver);
+ if (ret)
+ return ret;
+ ret = regmap_field_read(priv->rf[VER_STEP], &step_ver);
+ if (ret)
+ return ret;
+ seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
+ } else {
+ seq_puts(s, "0.1.0\n");
+ }
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dbg_version);
+DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
+
+static void tsens_debug_init(struct platform_device *pdev)
+{
+ struct tsens_priv *priv = platform_get_drvdata(pdev);
+ struct dentry *root, *file;
+
+ root = debugfs_lookup("tsens", NULL);
+ if (!root)
+ priv->debug_root = debugfs_create_dir("tsens", NULL);
+ else
+ priv->debug_root = root;
+
+ file = debugfs_lookup("version", priv->debug_root);
+ if (!file)
+ debugfs_create_file("version", 0444, priv->debug_root,
+ pdev, &dbg_version_fops);
+
+ /* A directory for each instance of the TSENS IP */
+ priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
+ debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
+}
+#else
+static inline void tsens_debug_init(struct platform_device *pdev) {}
+#endif
+
static const struct regmap_config tsens_config = {
.name = "tm",
.reg_bits = 32,
@@ -199,6 +271,15 @@ int __init init_common(struct tsens_priv *priv)
goto err_put_device;
}
+ if (tsens_ver(priv) > VER_0_1) {
+ for (i = VER_MAJOR; i <= VER_STEP; i++) {
+ priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
+ priv->fields[i]);
+ if (IS_ERR(priv->rf[i]))
+ return PTR_ERR(priv->rf[i]);
+ }
+ }
+
priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map,
priv->fields[TSENS_EN]);
if (IS_ERR(priv->rf[TSENS_EN])) {
@@ -238,6 +319,8 @@ int __init init_common(struct tsens_priv *priv)
}
}
+ tsens_debug_init(op);
+
return 0;
err_put_device:
@@ -3,6 +3,7 @@
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*/
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -176,6 +177,7 @@ static int tsens_remove(struct platform_device *pdev)
{
struct tsens_priv *priv = platform_get_drvdata(pdev);
+ debugfs_remove_recursive(priv->debug_root);
if (priv->ops->disable)
priv->ops->disable(priv);
@@ -292,6 +292,8 @@ struct tsens_context {
* @feat: features of the IP
* @fields: bitfield locations
* @ops: pointer to list of callbacks supported by this device
+ * @debug_root: pointer to debugfs dentry for all tsens
+ * @debug: pointer to debugfs dentry for tsens controller
* @sensor: list of sensors attached to this device
*/
struct tsens_priv {
@@ -305,6 +307,10 @@ struct tsens_priv {
const struct tsens_features *feat;
const struct reg_field *fields;
const struct tsens_ops *ops;
+
+ struct dentry *debug_root;
+ struct dentry *debug;
+
struct tsens_sensor sensor[0];
};
Dump some basic version info and sensor details into debugfs. Example from qcs404 below: --(/sys/kernel/debug) $ ls tsens/ 4a9000.thermal-sensor version --(/sys/kernel/debug) $ cat tsens/version 1.4.0 --(/sys/kernel/debug) $ cat tsens/4a9000.thermal-sensor/sensors max: 11 num: 10 id slope offset ------------------------ 0 3200 404000 1 3200 404000 2 3200 404000 3 3200 404000 4 3200 404000 5 3200 404000 6 3200 404000 7 3200 404000 8 3200 404000 9 3200 404000 Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- drivers/thermal/qcom/tsens-common.c | 83 +++++++++++++++++++++++++++++ drivers/thermal/qcom/tsens.c | 2 + drivers/thermal/qcom/tsens.h | 6 +++ 3 files changed, 91 insertions(+)