| Message ID | f89944deceba4c16c1863f1b303e2d970f3c8456.1543335819.git.amit.kucheria@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | thermal: tsens: Add support for QCS404 platform | expand |
On Tue, Nov 27, 2018 at 09:59:07PM +0530, Amit Kucheria wrote: > qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal > zone for each of those sensors to expose the temperature of each zone. > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > Reviewed-by: Vinod Koul <vkoul@kernel.org> > Tested-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/qcs404.dtsi | 206 +++++++++++++++++++++++++++ > 1 file changed, 206 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index 57d14d8f0c90..cbc3fd378893 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -30,6 +30,7 @@ > reg = <0x100>; > enable-method = "psci"; > next-level-cache = <&L2_0>; > + #cooling-cells= <2>; > }; > > CPU1: cpu@101 { > @@ -38,6 +39,7 @@ > reg = <0x101>; > enable-method = "psci"; > next-level-cache = <&L2_0>; > + #cooling-cells= <2>; > }; > > CPU2: cpu@102 { > @@ -46,6 +48,7 @@ > reg = <0x102>; > enable-method = "psci"; > next-level-cache = <&L2_0>; > + #cooling-cells= <2>; > }; > > CPU3: cpu@103 { > @@ -54,6 +57,7 @@ > reg = <0x103>; > enable-method = "psci"; > next-level-cache = <&L2_0>; > + #cooling-cells= <2>; > }; > > L2_0: l2-cache { > @@ -507,4 +511,206 @@ > #interrupt-cells = <2>; > }; > }; > + > + thermal-zones { > + aoss-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 0>; > + > + trips { > + aoss_alert: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; A passive trip and yet no cooling map associate to it.. > + }; > + aoss_crit: trip1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + dsp-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 1>; > + > + trips { > + dsp_alert: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + dsp_crit: trip1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + lpass-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 2>; > + > + trips { > + lpass_alert: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + lpass_crit: trip1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + wlan-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 3>; > + > + trips { > + wlan_alert: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + wlan_crit: trip1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cluster-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 4>; > + > + trips { > + cluster_alert: cluster_alert { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cluster_crit: cluster_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpu-thermal0 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 5>; > + > + trips { > + cpu_alert0: cpu_alert0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu_crit0: cpu_crit0 { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpu-thermal1 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 6>; > + > + trips { > + cpu_alert1: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu_crit1: trip1 { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpu-thermal2 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 7>; > + > + trips { > + cpu_alert2: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu_crit2: trip1 { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpu-thermal3 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 8>; > + > + trips { > + cpu_alert3: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + cpu_crit3: trip1 { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + gpu-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens 9>; > + > + trips { > + gpu_alert: trip0 { > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + gpu_crit: trip1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + }; > }; > -- > 2.17.1 >
On Thu, Nov 29, 2018 at 10:27 PM Eduardo Valentin <edubezval@gmail.com> wrote: > > On Tue, Nov 27, 2018 at 09:59:07PM +0530, Amit Kucheria wrote: > > qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal > > zone for each of those sensors to expose the temperature of each zone. > > > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > > Tested-by: Vinod Koul <vkoul@kernel.org> > > --- > > arch/arm64/boot/dts/qcom/qcs404.dtsi | 206 +++++++++++++++++++++++++++ > > 1 file changed, 206 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > > index 57d14d8f0c90..cbc3fd378893 100644 > > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > > @@ -30,6 +30,7 @@ > > reg = <0x100>; > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > + #cooling-cells= <2>; > > }; > > > > CPU1: cpu@101 { > > @@ -38,6 +39,7 @@ > > reg = <0x101>; > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > + #cooling-cells= <2>; > > }; > > > > CPU2: cpu@102 { > > @@ -46,6 +48,7 @@ > > reg = <0x102>; > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > + #cooling-cells= <2>; > > }; > > > > CPU3: cpu@103 { > > @@ -54,6 +57,7 @@ > > reg = <0x103>; > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > + #cooling-cells= <2>; > > }; > > > > L2_0: l2-cache { > > @@ -507,4 +511,206 @@ > > #interrupt-cells = <2>; > > }; > > }; > > + > > + thermal-zones { > > + aoss-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 0>; > > + > > + trips { > > + aoss_alert: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > > A passive trip and yet no cooling map associate to it.. Oops, was waiting for cpufreq to be enabled on the platform. I'll get rid of the trips for now. > > > + }; > > + aoss_crit: trip1 { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + dsp-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 1>; > > + > > + trips { > > + dsp_alert: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + dsp_crit: trip1 { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + lpass-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 2>; > > + > > + trips { > > + lpass_alert: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + lpass_crit: trip1 { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + wlan-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 3>; > > + > > + trips { > > + wlan_alert: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + wlan_crit: trip1 { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + cluster-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 4>; > > + > > + trips { > > + cluster_alert: cluster_alert { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + cluster_crit: cluster_crit { > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + cpu-thermal0 { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 5>; > > + > > + trips { > > + cpu_alert0: cpu_alert0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + cpu_crit0: cpu_crit0 { > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + cpu-thermal1 { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 6>; > > + > > + trips { > > + cpu_alert1: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + cpu_crit1: trip1 { > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + cpu-thermal2 { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 7>; > > + > > + trips { > > + cpu_alert2: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + cpu_crit2: trip1 { > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + cpu-thermal3 { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 8>; > > + > > + trips { > > + cpu_alert3: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + cpu_crit3: trip1 { > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + gpu-thermal { > > + polling-delay-passive = <250>; > > + polling-delay = <1000>; > > + > > + thermal-sensors = <&tsens 9>; > > + > > + trips { > > + gpu_alert: trip0 { > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + gpu_crit: trip1 { > > + temperature = <95000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + }; > > }; > > -- > > 2.17.1 > >
On Tue, Dec 04, 2018 at 04:56:15PM +0530, Amit Kucheria wrote: > On Thu, Nov 29, 2018 at 10:27 PM Eduardo Valentin <edubezval@gmail.com> wrote: > > > > On Tue, Nov 27, 2018 at 09:59:07PM +0530, Amit Kucheria wrote: > > > qcs404 has 10 sensors connected to the single TSENS IP. Define a thermal > > > zone for each of those sensors to expose the temperature of each zone. > > > > > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > > > Tested-by: Vinod Koul <vkoul@kernel.org> > > > --- > > > arch/arm64/boot/dts/qcom/qcs404.dtsi | 206 +++++++++++++++++++++++++++ > > > 1 file changed, 206 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > > > index 57d14d8f0c90..cbc3fd378893 100644 > > > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > > > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > > > @@ -30,6 +30,7 @@ > > > reg = <0x100>; > > > enable-method = "psci"; > > > next-level-cache = <&L2_0>; > > > + #cooling-cells= <2>; > > > }; > > > > > > CPU1: cpu@101 { > > > @@ -38,6 +39,7 @@ > > > reg = <0x101>; > > > enable-method = "psci"; > > > next-level-cache = <&L2_0>; > > > + #cooling-cells= <2>; > > > }; > > > > > > CPU2: cpu@102 { > > > @@ -46,6 +48,7 @@ > > > reg = <0x102>; > > > enable-method = "psci"; > > > next-level-cache = <&L2_0>; > > > + #cooling-cells= <2>; > > > }; > > > > > > CPU3: cpu@103 { > > > @@ -54,6 +57,7 @@ > > > reg = <0x103>; > > > enable-method = "psci"; > > > next-level-cache = <&L2_0>; > > > + #cooling-cells= <2>; > > > }; > > > > > > L2_0: l2-cache { > > > @@ -507,4 +511,206 @@ > > > #interrupt-cells = <2>; > > > }; > > > }; > > > + > > > + thermal-zones { > > > + aoss-thermal { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 0>; > > > + > > > + trips { > > > + aoss_alert: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > > > > A passive trip and yet no cooling map associate to it.. > > Oops, was waiting for cpufreq to be enabled on the platform. I'll get > rid of the trips for now. Well, the expectation is to have a fully defined thermal zone. Without trips or cooling maps they are not complete. > > > > > > + }; > > > + aoss_crit: trip1 { > > > + temperature = <95000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + dsp-thermal { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 1>; > > > + > > > + trips { > > > + dsp_alert: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + dsp_crit: trip1 { > > > + temperature = <95000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + lpass-thermal { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 2>; > > > + > > > + trips { > > > + lpass_alert: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + lpass_crit: trip1 { > > > + temperature = <95000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + wlan-thermal { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 3>; > > > + > > > + trips { > > > + wlan_alert: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + wlan_crit: trip1 { > > > + temperature = <95000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + cluster-thermal { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 4>; > > > + > > > + trips { > > > + cluster_alert: cluster_alert { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + cluster_crit: cluster_crit { > > > + temperature = <110000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + cpu-thermal0 { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 5>; > > > + > > > + trips { > > > + cpu_alert0: cpu_alert0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + cpu_crit0: cpu_crit0 { > > > + temperature = <110000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + cpu-thermal1 { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 6>; > > > + > > > + trips { > > > + cpu_alert1: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + cpu_crit1: trip1 { > > > + temperature = <110000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + cpu-thermal2 { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 7>; > > > + > > > + trips { > > > + cpu_alert2: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + cpu_crit2: trip1 { > > > + temperature = <110000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + cpu-thermal3 { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 8>; > > > + > > > + trips { > > > + cpu_alert3: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + cpu_crit3: trip1 { > > > + temperature = <110000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + gpu-thermal { > > > + polling-delay-passive = <250>; > > > + polling-delay = <1000>; > > > + > > > + thermal-sensors = <&tsens 9>; > > > + > > > + trips { > > > + gpu_alert: trip0 { > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + gpu_crit: trip1 { > > > + temperature = <95000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + }; > > > }; > > > -- > > > 2.17.1 > > >
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 57d14d8f0c90..cbc3fd378893 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -30,6 +30,7 @@ reg = <0x100>; enable-method = "psci"; next-level-cache = <&L2_0>; + #cooling-cells= <2>; }; CPU1: cpu@101 { @@ -38,6 +39,7 @@ reg = <0x101>; enable-method = "psci"; next-level-cache = <&L2_0>; + #cooling-cells= <2>; }; CPU2: cpu@102 { @@ -46,6 +48,7 @@ reg = <0x102>; enable-method = "psci"; next-level-cache = <&L2_0>; + #cooling-cells= <2>; }; CPU3: cpu@103 { @@ -54,6 +57,7 @@ reg = <0x103>; enable-method = "psci"; next-level-cache = <&L2_0>; + #cooling-cells= <2>; }; L2_0: l2-cache { @@ -507,4 +511,206 @@ #interrupt-cells = <2>; }; }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + aoss_crit: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + dsp_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + dsp_crit: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + lpass_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + lpass_crit: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + wlan_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + wlan_crit: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cluster_alert: cluster_alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cluster_crit: cluster_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: cpu_crit0 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; };