| Message ID | faa728f587df5372dd78b3d012ed6bf78e92e883.1525343531.git.asutoshd@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On 2018-05-03 04:07, Asutosh Das wrote: > From: Venkat Gopalakrishnan <venkatg@codeaurora.org> > > As multiple requests are submitted to the ufs host controller in > parallel there could be instances where the command completion > interrupt arrives later for a request that is already processed > earlier as the corresponding doorbell was cleared when handling > the previous interrupt. Read the interrupt status in a loop after > processing the received interrupt to catch such interrupts and > handle it. > > Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> > Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> > --- > drivers/scsi/ufs/ufshcd.c | 27 +++++++++++++++++++-------- > 1 file changed, 19 insertions(+), 8 deletions(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index c35a076..09b7a3f 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -5383,19 +5383,30 @@ static irqreturn_t ufshcd_intr(int irq, void > *__hba) > u32 intr_status, enabled_intr_status; > irqreturn_t retval = IRQ_NONE; > struct ufs_hba *hba = __hba; > + int retries = hba->nutrs; > > spin_lock(hba->host->host_lock); > intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); > - enabled_intr_status = > - intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); > > - if (intr_status) > - ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); > + /* > + * There could be max of hba->nutrs reqs in flight and in worst case > + * if the reqs get finished 1 by 1 after the interrupt status is > + * read, make sure we handle them by checking the interrupt status > + * again in a loop until we process all of the reqs before returning. > + */ > + do { > + enabled_intr_status = > + intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); > + if (intr_status) > + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); > + if (enabled_intr_status) { > + ufshcd_sl_intr(hba, enabled_intr_status); > + retval = IRQ_HANDLED; > + } > + > + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); > + } while (intr_status && --retries); > > - if (enabled_intr_status) { > - ufshcd_sl_intr(hba, enabled_intr_status); > - retval = IRQ_HANDLED; > - } > spin_unlock(hba->host->host_lock); > return retval; > } Looks good to me. Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index c35a076..09b7a3f 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5383,19 +5383,30 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba) u32 intr_status, enabled_intr_status; irqreturn_t retval = IRQ_NONE; struct ufs_hba *hba = __hba; + int retries = hba->nutrs; spin_lock(hba->host->host_lock); intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); - enabled_intr_status = - intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); - if (intr_status) - ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + /* + * There could be max of hba->nutrs reqs in flight and in worst case + * if the reqs get finished 1 by 1 after the interrupt status is + * read, make sure we handle them by checking the interrupt status + * again in a loop until we process all of the reqs before returning. + */ + do { + enabled_intr_status = + intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + if (intr_status) + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + if (enabled_intr_status) { + ufshcd_sl_intr(hba, enabled_intr_status); + retval = IRQ_HANDLED; + } + + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + } while (intr_status && --retries); - if (enabled_intr_status) { - ufshcd_sl_intr(hba, enabled_intr_status); - retval = IRQ_HANDLED; - } spin_unlock(hba->host->host_lock); return retval; }