| Message ID | tencent_62395CA0D608DD0078DD3D889F6E4E22BA05@qq.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | arm64: dts: qcom: Add device tree for LTE dongle UZ801 v3.0 | expand |
On 10.03.2023 15:33, Yang Xiwen wrote: > This commit adds support for the uz801 v3.0 WiFi/LTE dongle made by > Henan Yiming Technology Co., Ltd. based on MSM8916. > > Note: The original firmware does not support 64-bit OS. It is necessary > to flash 64-bit TZ firmware to boot arm64. > > Currently supported: > - All CPU cores > - Buttons > - LEDs > - Modem > - SDHC > - USB Device Mode > - UART > > Signed-off-by: Yang Xiwen <forbidden405@foxmail.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/msm8916-yiming-uz801v3.dts | 35 +++++++++++++++++++ > 2 files changed, 36 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 31aa54f0428c3..0c4c71d6277b7 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb > +dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb > diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts > new file mode 100644 > index 0000000000000..74ce6563be183 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts > @@ -0,0 +1,35 @@ > +// SPDX-License-Identifier: GPL-2.0-only > + > +/dts-v1/; > + > +#include "msm8916-ufi.dtsi" > + > +/ { > + model = "uz801 v3.0 4G Modem Stick"; > + compatible = "yiming,uz801-v3", "qcom,msm8916"; > +}; > + > +&button_restart { > + gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; > +}; > + > +&led_r { > + gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; > +}; > + > +&led_g { > + gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; > +}; > + > +&led_b { > + gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; > +}; > + > +&button_default { > + pins = "gpio23"; > + bias-pull-up; > +}; > + > +&gpio_leds_default { > + pins = "gpio6", "gpio7", "gpio8"; > +};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 31aa54f0428c3..0c4c71d6277b7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts new file mode 100644 index 0000000000000..74ce6563be183 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "uz801 v3.0 4G Modem Stick"; + compatible = "yiming,uz801-v3", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; +}; + +&led_r { + gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; +}; + +&button_default { + pins = "gpio23"; + bias-pull-up; +}; + +&gpio_leds_default { + pins = "gpio6", "gpio7", "gpio8"; +};
This commit adds support for the uz801 v3.0 WiFi/LTE dongle made by Henan Yiming Technology Co., Ltd. based on MSM8916. Note: The original firmware does not support 64-bit OS. It is necessary to flash 64-bit TZ firmware to boot arm64. Currently supported: - All CPU cores - Buttons - LEDs - Modem - SDHC - USB Device Mode - UART Signed-off-by: Yang Xiwen <forbidden405@foxmail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8916-yiming-uz801v3.dts | 35 +++++++++++++++++++ 2 files changed, 36 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts