@@ -89,6 +89,14 @@ config BLK_DEV_INTEGRITY
T10/SCSI Data Integrity Field or the T13/ATA External Path
Protection. If in doubt, say N.
+config BLK_DEV_ZONED
+ bool "Zoned block device support"
+ ---help---
+ Block layer zoned block device support. This option enables
+ support for ZAC/ZBC host-managed and host-aware zoned block devices.
+
+ Say yes here if you have a ZAC or ZBC storage device.
+
config BLK_DEV_THROTTLING
bool "Block layer bio throttling support"
depends on BLK_CGROUP=y
@@ -22,4 +22,5 @@ obj-$(CONFIG_IOSCHED_CFQ) += cfq-iosched.o
obj-$(CONFIG_BLOCK_COMPAT) += compat_ioctl.o
obj-$(CONFIG_BLK_CMDLINE_PARSER) += cmdline-parser.o
obj-$(CONFIG_BLK_DEV_INTEGRITY) += bio-integrity.o blk-integrity.o t10-pi.o
+obj-$(CONFIG_BLK_DEV_ZONED) += blk-zoned.o
new file mode 100644
@@ -0,0 +1,257 @@
+/*
+ * Zoned block device handling
+ *
+ * Copyright (c) 2015, Hannes Reinecke
+ * Copyright (c) 2015, SUSE Linux GmbH
+ *
+ * Copyright (c) 2016, Damien Le Moal
+ * Copyright (c) 2016, Western Digital
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/rbtree.h>
+#include <linux/blkdev.h>
+
+static inline sector_t blk_zone_start(struct request_queue *q,
+ sector_t sector)
+{
+ sector_t zone_mask = blk_queue_zone_size(q) - 1;
+
+ return sector & ~zone_mask;
+}
+
+/*
+ * Check that a zone report belongs to the partition.
+ * If yes, fix its start sector and write pointer, copy it in the
+ * zone information array and return true. Return false otherwise.
+ */
+static bool blkdev_report_zone(struct block_device *bdev,
+ struct blk_zone *rep,
+ struct blk_zone *zone)
+{
+ sector_t offset = get_start_sect(bdev);
+
+ if (rep->start < offset)
+ return false;
+
+ rep->start -= offset;
+ if (rep->start + rep->len > bdev->bd_part->nr_sects)
+ return false;
+
+ if (rep->type == BLK_ZONE_TYPE_CONVENTIONAL)
+ rep->wp = rep->start + rep->len;
+ else
+ rep->wp -= offset;
+ memcpy(zone, rep, sizeof(struct blk_zone));
+
+ return true;
+}
+
+/**
+ * blkdev_report_zones - Get zones information
+ * @bdev: Target block device
+ * @sector: Sector from which to report zones
+ * @zones: Array of zone structures where to return the zones information
+ * @nr_zones: Number of zone structures in the zone array
+ * @gfp_mask: Memory allocation flags (for bio_alloc)
+ *
+ * Description:
+ * Get zone information starting from the zone containing @sector.
+ * The number of zone information reported may be less than the number
+ * requested by @nr_zones. The number of zones actually reported is
+ * returned in @nr_zones.
+ */
+int blkdev_report_zones(struct block_device *bdev,
+ sector_t sector,
+ struct blk_zone *zones,
+ unsigned int *nr_zones,
+ gfp_t gfp_mask)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+ struct blk_zone_report_hdr *hdr;
+ unsigned int nrz = *nr_zones;
+ struct page *page;
+ unsigned int nr_rep;
+ size_t rep_bytes;
+ unsigned int nr_pages;
+ struct bio *bio;
+ struct bio_vec *bv;
+ unsigned int i, n, nz;
+ unsigned int ofst;
+ void *addr;
+ int ret = 0;
+
+ if (!q)
+ return -ENXIO;
+
+ if (!blk_queue_is_zoned(q))
+ return -EOPNOTSUPP;
+
+ if (!nrz)
+ return 0;
+
+ if (sector > bdev->bd_part->nr_sects) {
+ *nr_zones = 0;
+ return 0;
+ }
+
+ /*
+ * The zone report has a header. So make room for it in the
+ * payload. Also make sure that the report fits in a single BIO
+ * that will not be split down the stack.
+ */
+ rep_bytes = sizeof(struct blk_zone_report_hdr) +
+ sizeof(struct blk_zone) * nrz;
+ rep_bytes = (rep_bytes + PAGE_SIZE - 1) & PAGE_MASK;
+ if (rep_bytes > (queue_max_sectors(q) << 9))
+ rep_bytes = queue_max_sectors(q) << 9;
+
+ nr_pages = min_t(unsigned int, BIO_MAX_PAGES,
+ rep_bytes >> PAGE_SHIFT);
+ nr_pages = min_t(unsigned int, nr_pages,
+ queue_max_segments(q));
+
+ bio = bio_alloc(gfp_mask, nr_pages);
+ if (!bio)
+ return -ENOMEM;
+
+ bio->bi_bdev = bdev;
+ bio->bi_iter.bi_sector = blk_zone_start(q, sector);
+ bio_set_op_attrs(bio, REQ_OP_ZONE_REPORT, 0);
+
+ for (i = 0; i < nr_pages; i++) {
+ page = alloc_page(gfp_mask);
+ if (!page) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ if (!bio_add_page(bio, page, PAGE_SIZE, 0)) {
+ __free_page(page);
+ break;
+ }
+ }
+
+ if (i == 0)
+ ret = -ENOMEM;
+ else
+ ret = submit_bio_wait(bio);
+ if (ret)
+ goto out;
+
+ /*
+ * Process the report result: skip the header and go through the
+ * reported zones to fixup and fixup the zone information for
+ * partitions. At the same time, return the zone information into
+ * the zone array.
+ */
+ n = 0;
+ nz = 0;
+ nr_rep = 0;
+ bio_for_each_segment_all(bv, bio, i) {
+
+ if (!bv->bv_page)
+ break;
+
+ addr = kmap_atomic(bv->bv_page);
+
+ /* Get header in the first page */
+ ofst = 0;
+ if (!nr_rep) {
+ hdr = (struct blk_zone_report_hdr *) addr;
+ nr_rep = hdr->nr_zones;
+ ofst = sizeof(struct blk_zone_report_hdr);
+ }
+
+ /* Fixup and report zones */
+ while (ofst < bv->bv_len &&
+ n < nr_rep && nz < nrz) {
+ if (blkdev_report_zone(bdev, addr + ofst, &zones[nz]))
+ nz++;
+ ofst += sizeof(struct blk_zone);
+ n++;
+ }
+
+ kunmap_atomic(addr);
+
+ if (n >= nr_rep || nz >= nrz)
+ break;
+
+ }
+
+out:
+ bio_for_each_segment_all(bv, bio, i)
+ __free_page(bv->bv_page);
+ bio_put(bio);
+
+ if (ret == 0)
+ *nr_zones = nz;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(blkdev_report_zones);
+
+/**
+ * blkdev_reset_zones - Reset zones write pointer
+ * @bdev: Target block device
+ * @sector: Start sector of the first zone to reset
+ * @nr_sectors: Number of sectors, at least the length of one zone
+ * @gfp_mask: Memory allocation flags (for bio_alloc)
+ *
+ * Description:
+ * Reset the write pointer of the zones contained in the range
+ * @sector..@sector+@nr_sectors. Specifying the entire disk sector range
+ * is valid, but the specified range should not contain conventional zones.
+ */
+int blkdev_reset_zones(struct block_device *bdev,
+ sector_t sector, sector_t nr_sectors,
+ gfp_t gfp_mask)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+ sector_t zone_sectors;
+ sector_t end_sector = sector + nr_sectors;
+ struct bio *bio;
+ int ret;
+
+ if (!q)
+ return -ENXIO;
+
+ if (!blk_queue_is_zoned(q))
+ return -EOPNOTSUPP;
+
+ if (end_sector > bdev->bd_part->nr_sects)
+ /* Out of range */
+ return -EINVAL;
+
+ /* Check alignment (handle eventual smaller last zone) */
+ zone_sectors = blk_queue_zone_size(q);
+ if (sector & (zone_sectors - 1))
+ return -EINVAL;
+
+ if ((nr_sectors & (zone_sectors - 1)) &&
+ end_sector != bdev->bd_part->nr_sects)
+ return -EINVAL;
+
+ while (sector < end_sector) {
+
+ bio = bio_alloc(gfp_mask, 0);
+ bio->bi_iter.bi_sector = sector;
+ bio->bi_bdev = bdev;
+ bio_set_op_attrs(bio, REQ_OP_ZONE_RESET, 0);
+
+ ret = submit_bio_wait(bio);
+ bio_put(bio);
+
+ if (ret)
+ return ret;
+
+ sector += zone_sectors;
+
+ /* This may take a while, so be nice to others */
+ cond_resched();
+
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(blkdev_reset_zones);
@@ -24,6 +24,7 @@
#include <linux/rcupdate.h>
#include <linux/percpu-refcount.h>
#include <linux/scatterlist.h>
+#include <linux/blkzoned.h>
struct module;
struct scsi_ioctl_command;
@@ -302,6 +303,21 @@ struct queue_limits {
enum blk_zoned_model zoned;
};
+#ifdef CONFIG_BLK_DEV_ZONED
+
+struct blk_zone_report_hdr {
+ unsigned int nr_zones;
+ u8 padding[60];
+};
+
+extern int blkdev_report_zones(struct block_device *bdev,
+ sector_t sector, struct blk_zone *zones,
+ unsigned int *nr_zones, gfp_t gfp_mask);
+extern int blkdev_reset_zones(struct block_device *bdev, sector_t sectors,
+ sector_t nr_sectors, gfp_t gfp_mask);
+
+#endif /* CONFIG_BLK_DEV_ZONED */
+
struct request_queue {
/*
* Together with queue_head for cacheline sharing
@@ -654,6 +670,11 @@ static inline bool blk_queue_is_zoned(struct request_queue *q)
}
}
+static inline unsigned int blk_queue_zone_size(struct request_queue *q)
+{
+ return blk_queue_is_zoned(q) ? q->limits.chunk_sectors : 0;
+}
+
/*
* We regard a request as sync, if either a read or a sync write
*/
@@ -1401,6 +1422,16 @@ static inline bool bdev_is_zoned(struct block_device *bdev)
return false;
}
+static inline unsigned int bdev_zone_size(struct block_device *bdev)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+
+ if (q)
+ return blk_queue_zone_size(q);
+
+ return 0;
+}
+
static inline int queue_dma_alignment(struct request_queue *q)
{
return q ? q->dma_alignment : 511;
@@ -70,6 +70,7 @@ header-y += bfs_fs.h
header-y += binfmts.h
header-y += blkpg.h
header-y += blktrace_api.h
+header-y += blkzoned.h
header-y += bpf_common.h
header-y += bpf.h
header-y += bpqether.h
new file mode 100644
@@ -0,0 +1,103 @@
+/*
+ * Zoned block devices handling.
+ *
+ * Copyright (C) 2015 Seagate Technology PLC
+ *
+ * Written by: Shaun Tancheff <shaun.tancheff@seagate.com>
+ *
+ * Modified by: Damien Le Moal <damien.lemoal@hgst.com>
+ * Copyright (C) 2016 Western Digital
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef _UAPI_BLKZONED_H
+#define _UAPI_BLKZONED_H
+
+#include <linux/types.h>
+
+/**
+ * enum blk_zone_type - Types of zones allowed in a zoned device.
+ *
+ * @BLK_ZONE_TYPE_CONVENTIONAL: The zone has no write pointer and can be writen
+ * randomly. Zone reset has no effect on the zone.
+ * @BLK_ZONE_TYPE_SEQWRITE_REQ: The zone must be written sequentially
+ * @BLK_ZONE_TYPE_SEQWRITE_PREF: The zone can be written non-sequentially
+ *
+ * Any other value not defined is reserved and must be considered as invalid.
+ */
+enum blk_zone_type {
+ BLK_ZONE_TYPE_CONVENTIONAL = 0x1,
+ BLK_ZONE_TYPE_SEQWRITE_REQ = 0x2,
+ BLK_ZONE_TYPE_SEQWRITE_PREF = 0x3,
+};
+
+/**
+ * enum blk_zone_cond - Condition [state] of a zone in a zoned device.
+ *
+ * @BLK_ZONE_COND_NOT_WP: The zone has no write pointer, it is conventional.
+ * @BLK_ZONE_COND_EMPTY: The zone is empty.
+ * @BLK_ZONE_COND_IMP_OPEN: The zone is open, but not explicitly opened.
+ * @BLK_ZONE_COND_EXP_OPEN: The zones was explicitly opened by an
+ * OPEN ZONE command.
+ * @BLK_ZONE_COND_CLOSED: The zone was [explicitly] closed after writing.
+ * @BLK_ZONE_COND_FULL: The zone is marked as full, possibly by a zone
+ * FINISH ZONE command.
+ * @BLK_ZONE_COND_READONLY: The zone is read-only.
+ * @BLK_ZONE_COND_OFFLINE: The zone is offline (sectors cannot be read/written).
+ *
+ * The Zone Condition state machine in the ZBC/ZAC standards maps the above
+ * deinitions as:
+ * - ZC1: Empty | BLK_ZONE_EMPTY
+ * - ZC2: Implicit Open | BLK_ZONE_COND_IMP_OPEN
+ * - ZC3: Explicit Open | BLK_ZONE_COND_EXP_OPEN
+ * - ZC4: Closed | BLK_ZONE_CLOSED
+ * - ZC5: Full | BLK_ZONE_FULL
+ * - ZC6: Read Only | BLK_ZONE_READONLY
+ * - ZC7: Offline | BLK_ZONE_OFFLINE
+ *
+ * Conditions 0x5 to 0xC are reserved by the current ZBC/ZAC spec and should
+ * be considered invalid.
+ */
+enum blk_zone_cond {
+ BLK_ZONE_COND_NOT_WP = 0x0,
+ BLK_ZONE_COND_EMPTY = 0x1,
+ BLK_ZONE_COND_IMP_OPEN = 0x2,
+ BLK_ZONE_COND_EXP_OPEN = 0x3,
+ BLK_ZONE_COND_CLOSED = 0x4,
+ BLK_ZONE_COND_READONLY = 0xD,
+ BLK_ZONE_COND_FULL = 0xE,
+ BLK_ZONE_COND_OFFLINE = 0xF,
+};
+
+/**
+ * struct blk_zone - Zone descriptor for BLKREPORTZONE ioctl.
+ *
+ * @start: Zone start in 512 B sector units
+ * @len: Zone length in 512 B sector units
+ * @wp: Zone write pointer location in 512 B sector units
+ * @type: see enum blk_zone_type for possible values
+ * @cond: see enum blk_zone_cond for possible values
+ * @non_seq: Flag indicating that the zone is using non-sequential resources
+ * (for host-aware zoned block devices only).
+ * @reset: Flag indicating that a zone reset is recommended.
+ * @reserved: Padding to 64 B to match the ZBC/ZAC defined zone descriptor size.
+ *
+ * start, len and wp use the regular 512 B sector unit, regardless of the
+ * device logical block size. The overall structure size is 64 B to match the
+ * ZBC/ZAC defined zone descriptor and allow support for future additional
+ * zone information.
+ */
+struct blk_zone {
+ __u64 start; /* Zone start sector */
+ __u64 len; /* Zone length in number of sectors */
+ __u64 wp; /* Zone write pointer position */
+ __u8 type; /* Zone type */
+ __u8 cond; /* Zone condition */
+ __u8 non_seq; /* Non-sequential write resources active */
+ __u8 reset; /* Reset write pointer recommended */
+ __u8 reserved[36];
+};
+
+#endif /* _UAPI_BLKZONED_H */