| Message ID | 1666693976-181094-2-git-send-email-john.garry@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | blk-mq/libata/scsi: SCSI driver tagging improvements Part II | expand |
On 10/25/22 19:32, John Garry wrote: > Add a function to handle queued ATA internal SCSI cmnds - does much the > same as ata_exec_internal_sg() does (which will be fixed up later to > actually queue internal cmnds through this function). > > Signed-off-by: John Garry <john.garry@huawei.com> > --- > drivers/ata/libata-sata.c | 3 +++ > drivers/ata/libata-scsi.c | 43 +++++++++++++++++++++++++++++++++++++++ > drivers/ata/libata.h | 3 ++- > include/linux/libata.h | 6 ++++++ > 4 files changed, 54 insertions(+), 1 deletion(-) > > diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c > index b6806d41a8c5..e8b828c56542 100644 > --- a/drivers/ata/libata-sata.c > +++ b/drivers/ata/libata-sata.c > @@ -1258,6 +1258,9 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) > { > int rc = 0; > > + if (blk_mq_is_reserved_rq(scsi_cmd_to_rq(cmd))) > + return ata_scsi_queue_internal(cmd, ap->link.device); > + > if (likely(ata_dev_enabled(ap->link.device))) > rc = __ata_scsi_queuecmd(cmd, ap->link.device); > else { > diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c > index 476e0ef4bd29..30d7c90b0c35 100644 > --- a/drivers/ata/libata-scsi.c > +++ b/drivers/ata/libata-scsi.c > @@ -3965,6 +3965,49 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) > return NULL; > } > > +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, > + struct ata_device *dev) > +{ > + struct ata_link *link = dev->link; > + struct ata_port *ap = link->ap; > + struct ata_queued_cmd *qc; > + > + /* no internal command while frozen */ > + if (ap->pflags & ATA_PFLAG_FROZEN) > + goto did_err; > + > + /* initialize internal qc */ > + qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL); > + link->preempted_tag = link->active_tag; > + link->preempted_sactive = link->sactive; > + ap->preempted_qc_active = ap->qc_active; > + ap->preempted_nr_active_links = ap->nr_active_links; > + link->active_tag = ATA_TAG_POISON; > + link->sactive = 0; > + ap->qc_active = 0; > + ap->nr_active_links = 0; > + > + if (qc->dma_dir != DMA_NONE) { > + int n_elem; > + > + n_elem = 1; > + qc->n_elem = n_elem; > + qc->sg = scsi_sglist(scmd); > + qc->nbytes = qc->sg->length; > + ata_sg_init(qc, qc->sg, n_elem); > + } > + > + scmd->submitter = SUBMITTED_BY_BLOCK_LAYER; > + > + ata_qc_issue(qc); Arg, no ! This potentially mixes NCQ and non-NCQ commands, which is forbidden by ATA spec. You need to use something like: if (ap->ops->qc_defer) { if ((rc = ap->ops->qc_defer(qc))) goto defer; } ata_qc_issue(qc); which is done in __ata_scsi_queuecmd() -> ata_scsi_translate() Unless you guarantee that ata_scsi_queue_internal() is always called from libata EH context ? > + > + return 0; > +did_err: > + scmd->result = (DID_ERROR << 16); > + scsi_done(scmd); > + return 0; > +} > + > int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev) > { > u8 scsi_op = scmd->cmnd[0]; > diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h > index 0c2df1e60768..15cd1cd618b8 100644 > --- a/drivers/ata/libata.h > +++ b/drivers/ata/libata.h > @@ -82,7 +82,6 @@ extern int ata_port_probe(struct ata_port *ap); > extern void __ata_port_probe(struct ata_port *ap); > extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, > u8 page, void *buf, unsigned int sectors); > - > #define to_ata_port(d) container_of(d, struct ata_port, tdev) > > /* libata-acpi.c */ > @@ -130,6 +129,8 @@ extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, > void ata_scsi_sdev_config(struct scsi_device *sdev); > int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev); > int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev); > +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, > + struct ata_device *dev); > > /* libata-eh.c */ > extern unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); > diff --git a/include/linux/libata.h b/include/linux/libata.h > index 827d5838cd23..8938b584520f 100644 > --- a/include/linux/libata.h > +++ b/include/linux/libata.h > @@ -764,7 +764,9 @@ struct ata_link { > > struct device tdev; > unsigned int active_tag; /* active tag on this link */ > + unsigned int preempted_tag; > u32 sactive; /* active NCQ commands */ > + u32 preempted_sactive; > > unsigned int flags; /* ATA_LFLAG_xxx */ > > @@ -857,6 +859,10 @@ struct ata_port { > #ifdef CONFIG_ATA_ACPI > struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ > #endif > + > + u64 preempted_qc_active; > + int preempted_nr_active_links; > + > /* owned by EH */ > u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; > };
On 27/10/2022 02:42, Damien Le Moal wrote: > On 10/25/22 19:32, John Garry wrote: >> Add a function to handle queued ATA internal SCSI cmnds - does much the >> same as ata_exec_internal_sg() does (which will be fixed up later to >> actually queue internal cmnds through this function). >> >> Signed-off-by: John Garry <john.garry@huawei.com> >> --- >> drivers/ata/libata-sata.c | 3 +++ >> drivers/ata/libata-scsi.c | 43 +++++++++++++++++++++++++++++++++++++++ >> drivers/ata/libata.h | 3 ++- >> include/linux/libata.h | 6 ++++++ >> 4 files changed, 54 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c >> index b6806d41a8c5..e8b828c56542 100644 >> --- a/drivers/ata/libata-sata.c >> +++ b/drivers/ata/libata-sata.c >> @@ -1258,6 +1258,9 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) >> { >> int rc = 0; >> >> + if (blk_mq_is_reserved_rq(scsi_cmd_to_rq(cmd))) >> + return ata_scsi_queue_internal(cmd, ap->link.device); >> + >> if (likely(ata_dev_enabled(ap->link.device))) >> rc = __ata_scsi_queuecmd(cmd, ap->link.device); >> else { >> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c >> index 476e0ef4bd29..30d7c90b0c35 100644 >> --- a/drivers/ata/libata-scsi.c >> +++ b/drivers/ata/libata-scsi.c >> @@ -3965,6 +3965,49 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) >> return NULL; >> } >> >> +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, >> + struct ata_device *dev) >> +{ >> + struct ata_link *link = dev->link; >> + struct ata_port *ap = link->ap; >> + struct ata_queued_cmd *qc; >> + >> + /* no internal command while frozen */ >> + if (ap->pflags & ATA_PFLAG_FROZEN) >> + goto did_err; >> + >> + /* initialize internal qc */ >> + qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL); >> + link->preempted_tag = link->active_tag; >> + link->preempted_sactive = link->sactive; >> + ap->preempted_qc_active = ap->qc_active; >> + ap->preempted_nr_active_links = ap->nr_active_links; >> + link->active_tag = ATA_TAG_POISON; >> + link->sactive = 0; >> + ap->qc_active = 0; >> + ap->nr_active_links = 0; >> + >> + if (qc->dma_dir != DMA_NONE) { >> + int n_elem; >> + >> + n_elem = 1; >> + qc->n_elem = n_elem; >> + qc->sg = scsi_sglist(scmd); >> + qc->nbytes = qc->sg->length; >> + ata_sg_init(qc, qc->sg, n_elem); >> + } >> + >> + scmd->submitter = SUBMITTED_BY_BLOCK_LAYER; >> + >> + ata_qc_issue(qc); > > Arg, no ! This potentially mixes NCQ and non-NCQ commands, which is > forbidden by ATA spec. You need to use something like: > > if (ap->ops->qc_defer) { > if ((rc = ap->ops->qc_defer(qc))) > goto defer; > } > > ata_qc_issue(qc); > > which is done in __ata_scsi_queuecmd() -> ata_scsi_translate() > > Unless you guarantee that ata_scsi_queue_internal() is always called > from libata EH context ? This will be called synchronously called from ata_exec_internal_sg(), so the same rules on NCQ vs non-NCQ would apply here. As I see, ata_exec_internal_sg() assumes non-NCQ mode and is not multi-thread safe. Thanks, John > >> + >> + return 0; >> +did_err: >> + scmd->result = (DID_ERROR << 16); >> + scsi_done(scmd); >> + return 0; >> +} >> + >> int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev) >> { >> u8 scsi_op = scmd->cmnd[0]; >> diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h >> index 0c2df1e60768..15cd1cd618b8 100644 >> --- a/drivers/ata/libata.h >> +++ b/drivers/ata/libata.h >> @@ -82,7 +82,6 @@ extern int ata_port_probe(struct ata_port *ap); >> extern void __ata_port_probe(struct ata_port *ap); >> extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, >> u8 page, void *buf, unsigned int sectors); >> - >> #define to_ata_port(d) container_of(d, struct ata_port, tdev) >> >> /* libata-acpi.c */ >> @@ -130,6 +129,8 @@ extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, >> void ata_scsi_sdev_config(struct scsi_device *sdev); >> int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev); >> int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev); >> +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, >> + struct ata_device *dev); >> >> /* libata-eh.c */ >> extern unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); >> diff --git a/include/linux/libata.h b/include/linux/libata.h >> index 827d5838cd23..8938b584520f 100644 >> --- a/include/linux/libata.h >> +++ b/include/linux/libata.h >> @@ -764,7 +764,9 @@ struct ata_link { >> >> struct device tdev; >> unsigned int active_tag; /* active tag on this link */ >> + unsigned int preempted_tag; >> u32 sactive; /* active NCQ commands */ >> + u32 preempted_sactive; >> >> unsigned int flags; /* ATA_LFLAG_xxx */ >> >> @@ -857,6 +859,10 @@ struct ata_port { >> #ifdef CONFIG_ATA_ACPI >> struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ >> #endif >> + >> + u64 preempted_qc_active; >> + int preempted_nr_active_links; >> + >> /* owned by EH */ >> u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; >> }; >
On 10/27/22 19:45, John Garry wrote: > On 27/10/2022 02:42, Damien Le Moal wrote: >> On 10/25/22 19:32, John Garry wrote: >>> Add a function to handle queued ATA internal SCSI cmnds - does much the >>> same as ata_exec_internal_sg() does (which will be fixed up later to >>> actually queue internal cmnds through this function). >>> >>> Signed-off-by: John Garry <john.garry@huawei.com> >>> --- >>> drivers/ata/libata-sata.c | 3 +++ >>> drivers/ata/libata-scsi.c | 43 +++++++++++++++++++++++++++++++++++++++ >>> drivers/ata/libata.h | 3 ++- >>> include/linux/libata.h | 6 ++++++ >>> 4 files changed, 54 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c >>> index b6806d41a8c5..e8b828c56542 100644 >>> --- a/drivers/ata/libata-sata.c >>> +++ b/drivers/ata/libata-sata.c >>> @@ -1258,6 +1258,9 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) >>> { >>> int rc = 0; >>> >>> + if (blk_mq_is_reserved_rq(scsi_cmd_to_rq(cmd))) >>> + return ata_scsi_queue_internal(cmd, ap->link.device); >>> + >>> if (likely(ata_dev_enabled(ap->link.device))) >>> rc = __ata_scsi_queuecmd(cmd, ap->link.device); >>> else { >>> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c >>> index 476e0ef4bd29..30d7c90b0c35 100644 >>> --- a/drivers/ata/libata-scsi.c >>> +++ b/drivers/ata/libata-scsi.c >>> @@ -3965,6 +3965,49 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) >>> return NULL; >>> } >>> >>> +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, >>> + struct ata_device *dev) >>> +{ >>> + struct ata_link *link = dev->link; >>> + struct ata_port *ap = link->ap; >>> + struct ata_queued_cmd *qc; >>> + >>> + /* no internal command while frozen */ >>> + if (ap->pflags & ATA_PFLAG_FROZEN) >>> + goto did_err; >>> + >>> + /* initialize internal qc */ >>> + qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL); >>> + link->preempted_tag = link->active_tag; >>> + link->preempted_sactive = link->sactive; >>> + ap->preempted_qc_active = ap->qc_active; >>> + ap->preempted_nr_active_links = ap->nr_active_links; >>> + link->active_tag = ATA_TAG_POISON; >>> + link->sactive = 0; >>> + ap->qc_active = 0; >>> + ap->nr_active_links = 0; >>> + >>> + if (qc->dma_dir != DMA_NONE) { >>> + int n_elem; >>> + >>> + n_elem = 1; >>> + qc->n_elem = n_elem; >>> + qc->sg = scsi_sglist(scmd); >>> + qc->nbytes = qc->sg->length; >>> + ata_sg_init(qc, qc->sg, n_elem); >>> + } >>> + >>> + scmd->submitter = SUBMITTED_BY_BLOCK_LAYER; >>> + >>> + ata_qc_issue(qc); >> >> Arg, no ! This potentially mixes NCQ and non-NCQ commands, which is >> forbidden by ATA spec. You need to use something like: >> >> if (ap->ops->qc_defer) { >> if ((rc = ap->ops->qc_defer(qc))) >> goto defer; >> } >> >> ata_qc_issue(qc); >> >> which is done in __ata_scsi_queuecmd() -> ata_scsi_translate() >> >> Unless you guarantee that ata_scsi_queue_internal() is always called >> from libata EH context ? > > This will be called synchronously called from ata_exec_internal_sg(), so > the same rules on NCQ vs non-NCQ would apply here. As I see, > ata_exec_internal_sg() assumes non-NCQ mode and is not multi-thread safe. Yep. No thread safety needed as we are always guaranteed to be in EH with the queue quiesced when this is executed. No other commands can come in at the same time. > > Thanks, > John > >> >>> + >>> + return 0; >>> +did_err: >>> + scmd->result = (DID_ERROR << 16); >>> + scsi_done(scmd); >>> + return 0; >>> +} >>> + >>> int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev) >>> { >>> u8 scsi_op = scmd->cmnd[0]; >>> diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h >>> index 0c2df1e60768..15cd1cd618b8 100644 >>> --- a/drivers/ata/libata.h >>> +++ b/drivers/ata/libata.h >>> @@ -82,7 +82,6 @@ extern int ata_port_probe(struct ata_port *ap); >>> extern void __ata_port_probe(struct ata_port *ap); >>> extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, >>> u8 page, void *buf, unsigned int sectors); >>> - >>> #define to_ata_port(d) container_of(d, struct ata_port, tdev) >>> >>> /* libata-acpi.c */ >>> @@ -130,6 +129,8 @@ extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, >>> void ata_scsi_sdev_config(struct scsi_device *sdev); >>> int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev); >>> int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev); >>> +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, >>> + struct ata_device *dev); >>> >>> /* libata-eh.c */ >>> extern unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); >>> diff --git a/include/linux/libata.h b/include/linux/libata.h >>> index 827d5838cd23..8938b584520f 100644 >>> --- a/include/linux/libata.h >>> +++ b/include/linux/libata.h >>> @@ -764,7 +764,9 @@ struct ata_link { >>> >>> struct device tdev; >>> unsigned int active_tag; /* active tag on this link */ >>> + unsigned int preempted_tag; >>> u32 sactive; /* active NCQ commands */ >>> + u32 preempted_sactive; >>> >>> unsigned int flags; /* ATA_LFLAG_xxx */ >>> >>> @@ -857,6 +859,10 @@ struct ata_port { >>> #ifdef CONFIG_ATA_ACPI >>> struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ >>> #endif >>> + >>> + u64 preempted_qc_active; >>> + int preempted_nr_active_links; >>> + >>> /* owned by EH */ >>> u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; >>> }; >> >
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index b6806d41a8c5..e8b828c56542 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -1258,6 +1258,9 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) { int rc = 0; + if (blk_mq_is_reserved_rq(scsi_cmd_to_rq(cmd))) + return ata_scsi_queue_internal(cmd, ap->link.device); + if (likely(ata_dev_enabled(ap->link.device))) rc = __ata_scsi_queuecmd(cmd, ap->link.device); else { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 476e0ef4bd29..30d7c90b0c35 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3965,6 +3965,49 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) return NULL; } +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, + struct ata_device *dev) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ata_queued_cmd *qc; + + /* no internal command while frozen */ + if (ap->pflags & ATA_PFLAG_FROZEN) + goto did_err; + + /* initialize internal qc */ + qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL); + link->preempted_tag = link->active_tag; + link->preempted_sactive = link->sactive; + ap->preempted_qc_active = ap->qc_active; + ap->preempted_nr_active_links = ap->nr_active_links; + link->active_tag = ATA_TAG_POISON; + link->sactive = 0; + ap->qc_active = 0; + ap->nr_active_links = 0; + + if (qc->dma_dir != DMA_NONE) { + int n_elem; + + n_elem = 1; + qc->n_elem = n_elem; + qc->sg = scsi_sglist(scmd); + qc->nbytes = qc->sg->length; + ata_sg_init(qc, qc->sg, n_elem); + } + + scmd->submitter = SUBMITTED_BY_BLOCK_LAYER; + + ata_qc_issue(qc); + + return 0; +did_err: + scmd->result = (DID_ERROR << 16); + scsi_done(scmd); + return 0; +} + int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev) { u8 scsi_op = scmd->cmnd[0]; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 0c2df1e60768..15cd1cd618b8 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -82,7 +82,6 @@ extern int ata_port_probe(struct ata_port *ap); extern void __ata_port_probe(struct ata_port *ap); extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, u8 page, void *buf, unsigned int sectors); - #define to_ata_port(d) container_of(d, struct ata_port, tdev) /* libata-acpi.c */ @@ -130,6 +129,8 @@ extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, void ata_scsi_sdev_config(struct scsi_device *sdev); int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev); int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev); +unsigned int ata_scsi_queue_internal(struct scsi_cmnd *scmd, + struct ata_device *dev); /* libata-eh.c */ extern unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); diff --git a/include/linux/libata.h b/include/linux/libata.h index 827d5838cd23..8938b584520f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -764,7 +764,9 @@ struct ata_link { struct device tdev; unsigned int active_tag; /* active tag on this link */ + unsigned int preempted_tag; u32 sactive; /* active NCQ commands */ + u32 preempted_sactive; unsigned int flags; /* ATA_LFLAG_xxx */ @@ -857,6 +859,10 @@ struct ata_port { #ifdef CONFIG_ATA_ACPI struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif + + u64 preempted_qc_active; + int preempted_nr_active_links; + /* owned by EH */ u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; };
Add a function to handle queued ATA internal SCSI cmnds - does much the same as ata_exec_internal_sg() does (which will be fixed up later to actually queue internal cmnds through this function). Signed-off-by: John Garry <john.garry@huawei.com> --- drivers/ata/libata-sata.c | 3 +++ drivers/ata/libata-scsi.c | 43 +++++++++++++++++++++++++++++++++++++++ drivers/ata/libata.h | 3 ++- include/linux/libata.h | 6 ++++++ 4 files changed, 54 insertions(+), 1 deletion(-)