diff mbox

[06/12] bcache: correct cache_dirty_target in __update_writeback_rate()

Message ID 20170906062602.50497-7-colyli@suse.de (mailing list archive)
State New, archived
Headers show

Commit Message

Coly Li Sept. 6, 2017, 6:25 a.m. UTC
From: Tang Junhui <tang.junhui@zte.com.cn>

__update_write_rate() uses a Proportion-Differentiation Controller
algorithm to control writeback rate. A dirty target number is used in
this PD controller to control writeback rate. A larger target number
will make the writeback rate smaller, on the versus, a smaller target
number will make the writeback rate larger.

bcache uses the following steps to calculate the target number,
1) cache_sectors = all-buckets-of-cache-set * buckets-size
2) cache_dirty_target = cache_sectors * cached-device-writeback_percent
3) target = cache_dirty_target *
(sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set)

The calculation at step 1) for cache_sectors is incorrect, which does
not consider dirty blocks occupied by flash only volume.

A flash only volume can be took as a bcache device without cached
device. All data sectors allocated for it are persistent on cache device
and marked dirty, they are not touched by bcache writeback and garbage
collection code. So data blocks of flash only volume should be ignore
when calculating cache_sectors of cache set.

Current code does not subtract dirty sectors of flash only volume, which
results a larger target number from the above 3 steps. And in sequence
the cache device's writeback rate is smaller then a correct value,
writeback speed is slower on all cached devices.

This patch fixes the incorrect slower writeback rate by subtracting
dirty sectors of flash only volumes in __update_writeback_rate().

(Commit log composed by Coly Li to pass checkpatch.pl checking)

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
---
 drivers/md/bcache/writeback.c |  3 ++-
 drivers/md/bcache/writeback.h | 19 +++++++++++++++++++
 2 files changed, 21 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
index 42c66e76f05e..b533c2292ba5 100644
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -21,7 +21,8 @@ 
 static void __update_writeback_rate(struct cached_dev *dc)
 {
 	struct cache_set *c = dc->disk.c;
-	uint64_t cache_sectors = c->nbuckets * c->sb.bucket_size;
+	uint64_t cache_sectors = c->nbuckets * c->sb.bucket_size -
+				bcache_flash_devs_sectors_dirty(c);
 	uint64_t cache_dirty_target =
 		div_u64(cache_sectors * dc->writeback_percent, 100);
 
diff --git a/drivers/md/bcache/writeback.h b/drivers/md/bcache/writeback.h
index 629bd1a502fd..8789b9c8c484 100644
--- a/drivers/md/bcache/writeback.h
+++ b/drivers/md/bcache/writeback.h
@@ -14,6 +14,25 @@  static inline uint64_t bcache_dev_sectors_dirty(struct bcache_device *d)
 	return ret;
 }
 
+static inline uint64_t  bcache_flash_devs_sectors_dirty(struct cache_set *c)
+{
+	uint64_t i, ret = 0;
+
+	mutex_lock(&bch_register_lock);
+
+	for (i = 0; i < c->nr_uuids; i++) {
+		struct bcache_device *d = c->devices[i];
+
+		if (!d || !UUID_FLASH_ONLY(&c->uuids[i]))
+			continue;
+	   ret += bcache_dev_sectors_dirty(d);
+	}
+
+	mutex_unlock(&bch_register_lock);
+
+	return ret;
+}
+
 static inline unsigned offset_to_stripe(struct bcache_device *d,
 					uint64_t offset)
 {