diff mbox

[v3,11/11] nvmet: Optionally use PCI P2P memory

Message ID 20180312193525.2855-12-logang@deltatee.com (mailing list archive)
State New, archived
Headers show

Commit Message

Logan Gunthorpe March 12, 2018, 7:35 p.m. UTC
We create a configfs attribute in each nvme-fabrics target port to
enable p2p memory use. When enabled, the port will only then use the
p2p memory if a p2p memory device can be found which is behind the
same switch as the RDMA port and all the block devices in use. If
the user enabled it an no devices are found, then the system will
silently fall back on using regular memory.

If appropriate, that port will allocate memory for the RDMA buffers
for queues from the p2pmem device falling back to system memory should
anything fail.

Ideally, we'd want to use an NVME CMB buffer as p2p memory. This would
save an extra PCI transfer as the NVME card could just take the data
out of it's own memory. However, at this time, cards with CMB buffers
don't seem to be available.

Signed-off-by: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
[hch: partial rewrite of the initial code]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
---
 drivers/nvme/target/configfs.c |  67 ++++++++++++++++++++++++++
 drivers/nvme/target/core.c     | 106 ++++++++++++++++++++++++++++++++++++++++-
 drivers/nvme/target/io-cmd.c   |   3 ++
 drivers/nvme/target/nvmet.h    |  12 +++++
 drivers/nvme/target/rdma.c     |  32 +++++++++++--
 5 files changed, 214 insertions(+), 6 deletions(-)

Comments

Christoph Hellwig March 21, 2018, 9:27 a.m. UTC | #1
> +				  const char *page, size_t count)
> +{
> +	struct nvmet_port *port = to_nvmet_port(item);
> +	struct device *dev;
> +	struct pci_dev *p2p_dev = NULL;
> +	bool use_p2pmem;
> +
> +	switch (page[0]) {
> +	case 'y':
> +	case 'Y':
> +	case 'a':
> +	case 'A':
> +		use_p2pmem = true;
> +		break;
> +	case 'n':
> +	case 'N':
> +		use_p2pmem = false;
> +		break;
> +	default:
> +		dev = bus_find_device_by_name(&pci_bus_type, NULL, page);
> +		if (!dev) {
> +			pr_err("No such PCI device: %s\n", page);
> +			return -ENODEV;
> +		}
> +
> +		use_p2pmem = true;
> +		p2p_dev = to_pci_dev(dev);
> +
> +		if (!pci_has_p2pmem(p2p_dev)) {
> +			pr_err("PCI device has no peer-to-peer memory: %s\n",
> +			       page);
> +			pci_dev_put(p2p_dev);
> +			return -ENODEV;
> +		}
> +	}

Yikes.  Shouldn't auto just be the normal yes case instead of this
string parsing mess?

> +	if (rsp->req.sg != &rsp->cmd->inline_sg) {
> +		if (rsp->req.p2p_dev)
> +			pci_p2pmem_free_sgl(rsp->req.p2p_dev, rsp->req.sg,
> +					    rsp->req.sg_cnt);
> +		else
> +			sgl_free(rsp->req.sg);
> +	}

Can we factor this into a helper, as the other target drivers (fc for now,
tcp soon) using sgl allocatins should share the code?

(same for the alloc side)
Logan Gunthorpe March 21, 2018, 4:52 p.m. UTC | #2
On 21/03/18 03:27 AM, Christoph Hellwig wrote:
>> +				  const char *page, size_t count)
>> +{
>> +	struct nvmet_port *port = to_nvmet_port(item);
>> +	struct device *dev;
>> +	struct pci_dev *p2p_dev = NULL;
>> +	bool use_p2pmem;
>> +
>> +	switch (page[0]) {
>> +	case 'y':
>> +	case 'Y':
>> +	case 'a':
>> +	case 'A':
>> +		use_p2pmem = true;
>> +		break;
>> +	case 'n':
>> +	case 'N':
>> +		use_p2pmem = false;
>> +		break;
>> +	default:
>> +		dev = bus_find_device_by_name(&pci_bus_type, NULL, page);
>> +		if (!dev) {
>> +			pr_err("No such PCI device: %s\n", page);
>> +			return -ENODEV;
>> +		}
>> +
>> +		use_p2pmem = true;
>> +		p2p_dev = to_pci_dev(dev);
>> +
>> +		if (!pci_has_p2pmem(p2p_dev)) {
>> +			pr_err("PCI device has no peer-to-peer memory: %s\n",
>> +			       page);
>> +			pci_dev_put(p2p_dev);
>> +			return -ENODEV;
>> +		}
>> +	}
> 
> Yikes.  Shouldn't auto just be the normal yes case instead of this
> string parsing mess?

Sorry, I don't follow. The code, as is, should automatically select the
device if the user  sets it to "yes" or "auto" or "y" or similar.
(Roughly similar to how kstrtobool() works, except '0' or '1' are not
accepted seeing they could overlap with PCI device names). In other
cases, it looks for the specific PCI device name to use exactly.

Are you saying it shouldn't work this way or are you saying the code to
implement it is too messy?

>> +	if (rsp->req.sg != &rsp->cmd->inline_sg) {
>> +		if (rsp->req.p2p_dev)
>> +			pci_p2pmem_free_sgl(rsp->req.p2p_dev, rsp->req.sg,
>> +					    rsp->req.sg_cnt);
>> +		else
>> +			sgl_free(rsp->req.sg);
>> +	}
> 
> Can we factor this into a helper, as the other target drivers (fc for now,
> tcp soon) using sgl allocatins should share the code?
> 
> (same for the alloc side)

Sure. Would the helpers belong in core.c?

Thanks,

Logan
diff mbox

Patch

diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index e6b2d2af81b6..6ca8c712f0d3 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -17,6 +17,8 @@ 
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/ctype.h>
+#include <linux/pci.h>
+#include <linux/pci-p2pdma.h>
 
 #include "nvmet.h"
 
@@ -867,12 +869,77 @@  static void nvmet_port_release(struct config_item *item)
 	kfree(port);
 }
 
+#ifdef CONFIG_PCI_P2PDMA
+static ssize_t nvmet_p2pmem_show(struct config_item *item, char *page)
+{
+	struct nvmet_port *port = to_nvmet_port(item);
+
+	if (!port->use_p2pmem)
+		return sprintf(page, "none\n");
+
+	if (!port->p2p_dev)
+		return sprintf(page, "auto\n");
+
+	return sprintf(page, "%s\n", pci_name(port->p2p_dev));
+}
+
+static ssize_t nvmet_p2pmem_store(struct config_item *item,
+				  const char *page, size_t count)
+{
+	struct nvmet_port *port = to_nvmet_port(item);
+	struct device *dev;
+	struct pci_dev *p2p_dev = NULL;
+	bool use_p2pmem;
+
+	switch (page[0]) {
+	case 'y':
+	case 'Y':
+	case 'a':
+	case 'A':
+		use_p2pmem = true;
+		break;
+	case 'n':
+	case 'N':
+		use_p2pmem = false;
+		break;
+	default:
+		dev = bus_find_device_by_name(&pci_bus_type, NULL, page);
+		if (!dev) {
+			pr_err("No such PCI device: %s\n", page);
+			return -ENODEV;
+		}
+
+		use_p2pmem = true;
+		p2p_dev = to_pci_dev(dev);
+
+		if (!pci_has_p2pmem(p2p_dev)) {
+			pr_err("PCI device has no peer-to-peer memory: %s\n",
+			       page);
+			pci_dev_put(p2p_dev);
+			return -ENODEV;
+		}
+	}
+
+	down_write(&nvmet_config_sem);
+	port->use_p2pmem = use_p2pmem;
+	pci_dev_put(port->p2p_dev);
+	port->p2p_dev = p2p_dev;
+	up_write(&nvmet_config_sem);
+
+	return count;
+}
+CONFIGFS_ATTR(nvmet_, p2pmem);
+#endif /* CONFIG_PCI_P2PDMA */
+
 static struct configfs_attribute *nvmet_port_attrs[] = {
 	&nvmet_attr_addr_adrfam,
 	&nvmet_attr_addr_treq,
 	&nvmet_attr_addr_traddr,
 	&nvmet_attr_addr_trsvcid,
 	&nvmet_attr_addr_trtype,
+#ifdef CONFIG_PCI_P2PDMA
+	&nvmet_attr_p2pmem,
+#endif
 	NULL,
 };
 
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index a78029e4e5f4..ab3cc7135ae8 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -15,6 +15,7 @@ 
 #include <linux/module.h>
 #include <linux/random.h>
 #include <linux/rculist.h>
+#include <linux/pci-p2pdma.h>
 
 #include "nvmet.h"
 
@@ -271,6 +272,25 @@  void nvmet_put_namespace(struct nvmet_ns *ns)
 	percpu_ref_put(&ns->ref);
 }
 
+static int nvmet_p2pdma_add_client(struct nvmet_ctrl *ctrl,
+				   struct nvmet_ns *ns)
+{
+	int ret;
+
+	if (!blk_queue_pci_p2pdma(ns->bdev->bd_queue)) {
+		pr_err("peer-to-peer DMA is not supported by %s\n",
+		       ns->device_path);
+		return -EINVAL;
+	}
+
+	ret = pci_p2pdma_add_client(&ctrl->p2p_clients, nvmet_ns_dev(ns));
+	if (ret)
+		pr_err("failed to add peer-to-peer DMA client %s: %d\n",
+		       ns->device_path, ret);
+
+	return ret;
+}
+
 int nvmet_ns_enable(struct nvmet_ns *ns)
 {
 	struct nvmet_subsys *subsys = ns->subsys;
@@ -299,6 +319,14 @@  int nvmet_ns_enable(struct nvmet_ns *ns)
 	if (ret)
 		goto out_blkdev_put;
 
+	list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry) {
+		if (ctrl->p2p_dev) {
+			ret = nvmet_p2pdma_add_client(ctrl, ns);
+			if (ret)
+				goto out_remove_clients;
+		}
+	}
+
 	if (ns->nsid > subsys->max_nsid)
 		subsys->max_nsid = ns->nsid;
 
@@ -328,6 +356,9 @@  int nvmet_ns_enable(struct nvmet_ns *ns)
 out_unlock:
 	mutex_unlock(&subsys->lock);
 	return ret;
+out_remove_clients:
+	list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry)
+		pci_p2pdma_remove_client(&ctrl->p2p_clients, nvmet_ns_dev(ns));
 out_blkdev_put:
 	blkdev_put(ns->bdev, FMODE_WRITE|FMODE_READ);
 	ns->bdev = NULL;
@@ -363,8 +394,10 @@  void nvmet_ns_disable(struct nvmet_ns *ns)
 	percpu_ref_exit(&ns->ref);
 
 	mutex_lock(&subsys->lock);
-	list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry)
+	list_for_each_entry(ctrl, &subsys->ctrls, subsys_entry) {
+		pci_p2pdma_remove_client(&ctrl->p2p_clients, nvmet_ns_dev(ns));
 		nvmet_add_async_event(ctrl, NVME_AER_TYPE_NOTICE, 0, 0);
+	}
 
 	if (ns->bdev)
 		blkdev_put(ns->bdev, FMODE_WRITE|FMODE_READ);
@@ -764,6 +797,74 @@  bool nvmet_host_allowed(struct nvmet_req *req, struct nvmet_subsys *subsys,
 		return __nvmet_host_allowed(subsys, hostnqn);
 }
 
+/*
+ * If allow_p2pmem is set, we will try to use P2P memory for the SGL lists for
+ * Ι/O commands. This requires the PCI p2p device to be compatible with the
+ * backing device for every namespace on this controller.
+ */
+static void nvmet_setup_p2pmem(struct nvmet_ctrl *ctrl, struct nvmet_req *req)
+{
+	struct nvmet_ns *ns;
+	int ret;
+
+	if (!req->port->use_p2pmem || !req->p2p_client)
+		return;
+
+	mutex_lock(&ctrl->subsys->lock);
+
+	ret = pci_p2pdma_add_client(&ctrl->p2p_clients, req->p2p_client);
+	if (ret) {
+		pr_err("failed adding peer-to-peer DMA client %s: %d\n",
+		       dev_name(req->p2p_client), ret);
+		goto free_devices;
+	}
+
+	list_for_each_entry_rcu(ns, &ctrl->subsys->namespaces, dev_link) {
+		ret = nvmet_p2pdma_add_client(ctrl, ns);
+		if (ret)
+			goto free_devices;
+	}
+
+	if (req->port->p2p_dev) {
+		if (!pci_p2pdma_assign_provider(req->port->p2p_dev,
+						&ctrl->p2p_clients)) {
+			pr_info("peer-to-peer memory on %s is not supported\n",
+				pci_name(req->port->p2p_dev));
+			goto free_devices;
+		}
+		ctrl->p2p_dev = pci_dev_get(req->port->p2p_dev);
+	} else {
+		ctrl->p2p_dev = pci_p2pmem_find(&ctrl->p2p_clients);
+		if (!ctrl->p2p_dev) {
+			pr_info("no supported peer-to-peer memory devices found\n");
+			goto free_devices;
+		}
+	}
+
+	mutex_unlock(&ctrl->subsys->lock);
+
+	pr_info("using peer-to-peer memory on %s\n", pci_name(ctrl->p2p_dev));
+	return;
+
+free_devices:
+	pci_p2pdma_client_list_free(&ctrl->p2p_clients);
+	mutex_unlock(&ctrl->subsys->lock);
+}
+
+static void nvmet_release_p2pmem(struct nvmet_ctrl *ctrl)
+{
+	if (!ctrl->p2p_dev)
+		return;
+
+	mutex_lock(&ctrl->subsys->lock);
+
+	pci_p2pdma_client_list_free(&ctrl->p2p_clients);
+	pci_dev_put(ctrl->p2p_dev);
+	ctrl->p2p_dev = NULL;
+
+	mutex_unlock(&ctrl->subsys->lock);
+}
+
 u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 		struct nvmet_req *req, u32 kato, struct nvmet_ctrl **ctrlp)
 {
@@ -803,6 +904,7 @@  u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 
 	INIT_WORK(&ctrl->async_event_work, nvmet_async_event_work);
 	INIT_LIST_HEAD(&ctrl->async_events);
+	INIT_LIST_HEAD(&ctrl->p2p_clients);
 
 	memcpy(ctrl->subsysnqn, subsysnqn, NVMF_NQN_SIZE);
 	memcpy(ctrl->hostnqn, hostnqn, NVMF_NQN_SIZE);
@@ -858,6 +960,7 @@  u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 		ctrl->kato = DIV_ROUND_UP(kato, 1000);
 	}
 	nvmet_start_keep_alive_timer(ctrl);
+	nvmet_setup_p2pmem(ctrl, req);
 
 	mutex_lock(&subsys->lock);
 	list_add_tail(&ctrl->subsys_entry, &subsys->ctrls);
@@ -894,6 +997,7 @@  static void nvmet_ctrl_free(struct kref *ref)
 	flush_work(&ctrl->async_event_work);
 	cancel_work_sync(&ctrl->fatal_err_work);
 
+	nvmet_release_p2pmem(ctrl);
 	ida_simple_remove(&cntlid_ida, ctrl->cntlid);
 
 	kfree(ctrl->sqs);
diff --git a/drivers/nvme/target/io-cmd.c b/drivers/nvme/target/io-cmd.c
index 28bbdff4a88b..a213f8fc3bf3 100644
--- a/drivers/nvme/target/io-cmd.c
+++ b/drivers/nvme/target/io-cmd.c
@@ -56,6 +56,9 @@  static void nvmet_execute_rw(struct nvmet_req *req)
 		op = REQ_OP_READ;
 	}
 
+	if (is_pci_p2pdma_page(sg_page(req->sg)))
+		op_flags |= REQ_PCI_P2PDMA;
+
 	sector = le64_to_cpu(req->cmd->rw.slba);
 	sector <<= (req->ns->blksize_shift - 9);
 
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 417f6c0331cc..e05afdbdaa10 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -64,6 +64,11 @@  static inline struct nvmet_ns *to_nvmet_ns(struct config_item *item)
 	return container_of(to_config_group(item), struct nvmet_ns, group);
 }
 
+static inline struct device *nvmet_ns_dev(struct nvmet_ns *ns)
+{
+	return disk_to_dev(ns->bdev->bd_disk);
+}
+
 struct nvmet_cq {
 	u16			qid;
 	u16			size;
@@ -98,6 +103,8 @@  struct nvmet_port {
 	struct list_head		referrals;
 	void				*priv;
 	bool				enabled;
+	bool				use_p2pmem;
+	struct pci_dev			*p2p_dev;
 };
 
 static inline struct nvmet_port *to_nvmet_port(struct config_item *item)
@@ -131,6 +138,8 @@  struct nvmet_ctrl {
 	struct work_struct	fatal_err_work;
 
 	struct nvmet_fabrics_ops *ops;
+	struct pci_dev		*p2p_dev;
+	struct list_head	p2p_clients;
 
 	char			subsysnqn[NVMF_NQN_FIELD_LEN];
 	char			hostnqn[NVMF_NQN_FIELD_LEN];
@@ -232,6 +241,9 @@  struct nvmet_req {
 
 	void (*execute)(struct nvmet_req *req);
 	struct nvmet_fabrics_ops *ops;
+
+	struct pci_dev *p2p_dev;
+	struct device *p2p_client;
 };
 
 static inline void nvmet_set_status(struct nvmet_req *req, u16 status)
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index 978e169c11bf..84db1022664f 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -23,6 +23,7 @@ 
 #include <linux/string.h>
 #include <linux/wait.h>
 #include <linux/inet.h>
+#include <linux/pci-p2pdma.h>
 #include <asm/unaligned.h>
 
 #include <rdma/ib_verbs.h>
@@ -430,8 +431,13 @@  static void nvmet_rdma_release_rsp(struct nvmet_rdma_rsp *rsp)
 				rsp->req.sg_cnt, nvmet_data_dir(&rsp->req));
 	}
 
-	if (rsp->req.sg != &rsp->cmd->inline_sg)
-		sgl_free(rsp->req.sg);
+	if (rsp->req.sg != &rsp->cmd->inline_sg) {
+		if (rsp->req.p2p_dev)
+			pci_p2pmem_free_sgl(rsp->req.p2p_dev, rsp->req.sg,
+					    rsp->req.sg_cnt);
+		else
+			sgl_free(rsp->req.sg);
+	}
 
 	if (unlikely(!list_empty_careful(&queue->rsp_wr_wait_list)))
 		nvmet_rdma_process_wr_wait_list(queue);
@@ -567,15 +573,29 @@  static u16 nvmet_rdma_map_sgl_keyed(struct nvmet_rdma_rsp *rsp,
 	u64 addr = le64_to_cpu(sgl->addr);
 	u32 len = get_unaligned_le24(sgl->length);
 	u32 key = get_unaligned_le32(sgl->key);
+	struct pci_dev *p2p_dev = NULL;
 	int ret;
 
 	/* no data command? */
 	if (!len)
 		return 0;
 
-	rsp->req.sg = sgl_alloc(len, GFP_KERNEL, &rsp->req.sg_cnt);
-	if (!rsp->req.sg)
-		return NVME_SC_INTERNAL;
+	if (rsp->queue->nvme_sq.ctrl)
+		p2p_dev = rsp->queue->nvme_sq.ctrl->p2p_dev;
+
+	rsp->req.p2p_dev = NULL;
+	if (rsp->queue->nvme_sq.qid && p2p_dev) {
+		ret = pci_p2pmem_alloc_sgl(p2p_dev, &rsp->req.sg,
+					   &rsp->req.sg_cnt, len);
+		if (!ret)
+			rsp->req.p2p_dev = p2p_dev;
+	}
+
+	if (!rsp->req.p2p_dev) {
+		rsp->req.sg = sgl_alloc(len, GFP_KERNEL, &rsp->req.sg_cnt);
+		if (!rsp->req.sg)
+			return NVME_SC_INTERNAL;
+	}
 
 	ret = rdma_rw_ctx_init(&rsp->rw, cm_id->qp, cm_id->port_num,
 			rsp->req.sg, rsp->req.sg_cnt, 0, addr, key,
@@ -658,6 +678,8 @@  static void nvmet_rdma_handle_command(struct nvmet_rdma_queue *queue,
 		cmd->send_sge.addr, cmd->send_sge.length,
 		DMA_TO_DEVICE);
 
+	cmd->req.p2p_client = &queue->dev->device->dev;
+
 	if (!nvmet_req_init(&cmd->req, &queue->nvme_cq,
 			&queue->nvme_sq, &nvmet_rdma_ops))
 		return;