new file mode 100755
@@ -0,0 +1,255 @@
+#!/bin/bash
+#
+# Regression test for patch "block: do not use interruptible wait anywhere".
+#
+# > Without this fix, I get an IO error in this test:
+# >
+# > # dd if=/dev/sda of=/dev/null iflag=direct & \
+# > while killall -SIGUSR1 dd; do sleep 0.1; done & \
+# > echo mem > /sys/power/state ; \
+# > sleep 5; killall dd # stop after 5 seconds
+#
+# AJ: linux-block specifically asked for a test derived from this reproducer.
+# They didn't come up with any suggestion for testing the code more directly
+# (and robustly). So this test uses system suspend, automated with pm_test.
+#
+#
+# Rationale for the test needing system suspend:
+#
+# The original root cause issue was the behaviour around blk_queue_freeze().
+# It put tasks into an interruptible wait, which is wrong for block devices.
+#
+# The freeze feature is not directly exposed to userspace, so I can not test
+# it directly :(. (It's used to "guarantee no request is in use, so we can
+# change any data structure of the queue afterward". I.e. freeze, modify the
+# queue structure, unfreeze).
+#
+# However, this lead to a kernel regression with a decent reproducer. In
+# v4.15 the same interruptible wait was also used for SCSI suspend/resume.
+# SCSI resume can take a second or so, hence we like to do it asynchronously.
+# This means we can observe the wait at resume time, and we can test if it is
+# interruptible.
+#
+# Note `echo quiesce > /sys/class/scsi_device/*/device/state` can *not*
+# trigger the specific wait in the block layer. That code path only
+# sets the SCSI device state; it does not set any block device state.
+# (It does not call into blk_queue_freeze() or blk_set_preempt_only();
+# it literally just sets sdev->sdev_state to SDEV_QUIESCE).
+#
+#
+# Copyright (C) 2018 Alan Jenkins
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+DESCRIPTION="check SCSI blockdev suspend is not interruptible"
+
+QUICK=1
+
+requires() {
+ # I can't expect to hit the window using bash, if the device is
+ # emulated by cpu.
+ #
+ # Maybe annoying to see this message on Xen dom0,
+ # but I'm guessing that's not common.
+ #
+ if grep -q ^flags.*\ hypervisor /proc/cpuinfo &&
+ (( !HAVE_BARE_METAL_SCSI )); then
+ SKIP_REASON=\
+"Hypervisor detected, but this test wants bare-metal SCSI timings.
+If you have a pass-through device, you may set HAVE_BARE_METAL_SCSI=1."
+ return 1
+ fi
+
+ # "If a user has disabled async probing a likely reason
+ # is due to a storage enclosure that does not inject
+ # staggered spin-ups. For safety, make resume
+ # synchronous as well in that case."
+ if ! scan="$(cat /sys/module/scsi_mod/parameters/scan)"; then
+ SKIP_REASON="Could not read '/sys/module/scsi_mod/parameters/scan'"
+ return 1
+ fi
+ if [[ "$scan" != async ]]; then
+ SKIP_REASON="This test does not work if you have set 'scsi_mod.scan=sync'"
+ return 1
+ fi
+
+ if ! cat /sys/power/pm_test > /dev/null; then
+ SKIP_REASON="Error reading pm_test. Maybe kernel lacks CONFIG_PM_TEST?"
+ return 1
+ fi
+
+ _have_fio
+}
+
+do_test_device() ( # run whole function in a subshell
+
+ sysfs_pm_test_delay=/sys/module/suspend/parameters/pm_test_delay
+ saved_pm_test_delay=
+ fio_pid=
+ subshell_pid=
+
+ # Fail the test early, in cases where it should not continue.
+ fail() {
+ echo "$*"
+ exit 1
+ }
+
+ # Terminate child process
+ cleanup_pid() {
+ local pid="$1"
+
+ # Suppress shell messages about killed process.
+ # The messages would vary, causing the test to fail.
+ exec 3>&1 4>&2
+ exec >>"$FULL" 2>&1
+
+ # Send terminate signal. Also send the continue signal,
+ # in case the process was currently stopped.
+ (kill "$pid" && kill -CONT "$pid") >&3 2>&4
+
+ # Don't try to re-redirect output from `wait` just in case,
+ # if `wait` is executed in a subshell then it cannot work.
+ wait "$pid"
+
+ # Restore stdout/stderr
+ exec >&3 2>&4
+ exec 3>&- 4>&-
+ }
+
+ cleanup() {
+ if [[ -n "$subshell_pid" ]]; then
+ echo "Killing sub-shell..."
+ cleanup_pid "$subshell_pid"
+ fi
+ if [[ -n "$fio_pid" ]]; then
+ echo "Killing fio..."
+ cleanup_pid "$fio_pid"
+ fi
+
+ echo "Resetting pm_test_delay"
+ if [[ -n "$saved_pm_test_delay" ]]; then
+ echo "$saved_pm_test_delay" > "$sysfs_pm_test_delay"
+ fi
+
+ echo "Resetting pm_test"
+ echo none > /sys/power/pm_test
+ }
+ trap cleanup EXIT
+
+ # Start fio, as a background process which submits IOs and stops
+ # with an error when one fails. Use threads instead of separate
+ # processes, so it's easier to send signals to the IO thread.
+ #
+ # This is the same behaviour as dd, except that we loop in case the
+ # device is tiny. (Strictly speaking, the block size is different too).
+ #
+ fio --output="${FULL}.fio" --filename="$TEST_DEV" \
+ --thread --exitall_on_error --loops=1G \
+ --direct=1 --rw=read --name=reads &
+ fio_pid=$!
+
+ # Keep sending signals to 'fio`. Give it 1ms between
+ # signals so it gets a chance to actually submit IOs.
+ #
+ # In theory this script is probably subject to various
+ # pid re-use races. But I started in sh... so far
+ # blktests does not depend on python... also direct IO
+ # is best to reproduce this, which is not built in to
+ # python.
+ (
+ while kill -STOP $fio_pid 2>>"$FULL" &&
+ kill -CONT $fio_pid 2>>"$FULL"; do
+
+ sleep 0.001
+ done
+
+ # dd exited. Wait to be killed, it simplifies cleanup.
+ while true; do
+ sleep 1
+ done
+ ) &
+ subshell_pid=$!
+
+ # Here's the real race condition.
+ #
+ # We only want to suspend once both child processes have reached their
+ # main loops. Otherwise we get a false pass. We use the following
+ # mitigations:
+ #
+ # 1. Wait 1 second first.
+ #
+ # 2. Make sure to call this function twice, so hopefully the second
+ # time will not have to wait to page anything in.
+ #
+ # 3. Wait for any pending writes first. I think that this redundant in
+ # principle, but will make for more consistent timings.
+ #
+ # (You can actually solve this precisely using strace or the like...
+ # but it still looks weird, and adds another depedency)
+ #
+ sync
+ sleep 1
+
+ if ! echo devices > /sys/power/pm_test; then
+ fail "error setting pm_test"
+ fi
+
+ if ! saved_pm_test_delay="$(cat "$sysfs_pm_test_delay")"; then
+ fail "error reading pm_test_delay"
+ fi
+ if ! echo 0 > "$sysfs_pm_test_delay"; then
+ fail "error setting pm_test_delay"
+ fi
+
+ # Log that we're suspending. User might not have guessed,
+ # or maybe suspend (or pm_test suspend) is broken on this system.
+ echo "Simulating suspend/resume now"
+ echo mem > /sys/power/state
+
+ # Now wait for TEST_DEV to resume asynchronously
+ dd iflag=direct if="$TEST_DEV" of=/dev/null count=1 status=none
+
+ # Wait again. This will be useful in the case fio got blocked on a
+ # page fault during the suspend; it will have a second to get sorted out,
+ # so it can potentially receive an IO error and exit.
+ sleep 1
+ dd iflag=direct if="$TEST_DEV" of=/dev/null count=1 status=none
+
+ if ! kill -0 $fio_pid 2>/dev/null; then
+ # dd exited before we entered cleanup.
+ # Read its exit status
+ wait $fio_pid
+ ret=$?
+ fio_pid=
+
+ if [[ $ret == 0 ]]; then
+ fail "'fio' exited early, without error. Please report this as a bug."
+ else
+ # Test should already fail at this point due to
+ # error messages. But let's log it while we're here,
+ # and also not run the second iteration of the test.
+ fail "'fio' exited with error $ret"
+ fi
+ fi
+) # end subshell function
+
+test_device() {
+ echo "Running ${TEST_NAME}"
+
+ # Run the test twice. Hopefully the second iteration will
+ # have everything in page cache for consistent timings.
+ do_test_device && do_test_device
+
+ echo "Test complete"
+}
new file mode 100644
@@ -0,0 +1,12 @@
+Running scsi/004
+Simulating suspend/resume now
+Killing sub-shell...
+Killing fio...
+Resetting pm_test_delay
+Resetting pm_test
+Simulating suspend/resume now
+Killing sub-shell...
+Killing fio...
+Resetting pm_test_delay
+Resetting pm_test
+Test complete