new file mode 100755
@@ -0,0 +1,92 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-3.0+
+# Copyright (C) 2019 Martin K. Petersen <martin.petersen@oracle.com>
+#
+# Test that device read-only state transitions are handled correctly.
+
+. tests/block/rc
+. common/scsi_debug
+
+DESCRIPTION="test that device read-only state transitions are handled correctly"
+
+requires() {
+ _have_scsi_debug
+}
+
+get_ro() {
+ local sys="/sys/block/${SCSI_DEBUG_DEVICES[0]}"
+ local ROSTATE=()
+
+ for part in "${sys}"/ro "${sys}"/*/ro; do
+ ROSTATE+=("$(cat "${part}")")
+ done
+
+ echo "${ROSTATE[*]}"
+}
+
+test() {
+ echo "Running ${TEST_NAME}"
+
+ if ! _init_scsi_debug dev_size_mb=128 num_parts=3; then
+ return 1
+ fi
+
+ local dev="/dev/${SCSI_DEBUG_DEVICES[0]}"
+ local sys="/sys/block/${SCSI_DEBUG_DEVICES[0]}"
+ local wp="/sys/module/scsi_debug/parameters/wp"
+
+ echo "Verify that device comes up read-write"
+ get_ro
+
+ echo "Verify that setting partition 2 read-only works"
+ blockdev --setro "${dev}2"
+ get_ro
+
+ echo "Verify that setting whole disk read-only works"
+ blockdev --setro "${dev}"
+ get_ro
+
+ echo "Verify that device revalidate works for whole disk policy"
+ echo 1 > "${sys}/device/rescan"
+ get_ro
+
+ echo "Verify that setting whole disk device back to read-write works"
+ blockdev --setrw "${dev}"
+ get_ro
+
+ echo "Verify that device revalidate works for partition policy"
+ echo 1 > "${sys}/device/rescan"
+ get_ro
+
+ echo "Verify setting hardware device read-only"
+ if [[ -f "${wp}" ]]; then
+ echo 1 > "${wp}"
+ echo 1 > "${sys}/device/rescan"
+ get_ro
+ else
+ echo "1 1 1 1"
+ fi
+
+ echo "Verify setting hardware device read-write"
+ if [[ -f "${wp}" ]]; then
+ echo 0 > "${wp}"
+ echo 1 > "${sys}/device/rescan"
+ get_ro
+ else
+ echo "0 0 1 0"
+ fi
+
+ echo "Verify that partition read-only policy is lost after BLKRRPART"
+ blockdev --setro "${dev}2"
+ blockdev --rereadpt "${dev}"
+ get_ro
+
+ echo "Verify that whole disk read-only policy persists after BLKRRPART"
+ blockdev --setro "${dev}"
+ blockdev --rereadpt "${dev}"
+ get_ro
+
+ _exit_scsi_debug
+
+ echo "Test complete"
+}
new file mode 100644
@@ -0,0 +1,22 @@
+Running block/022
+Verify that device comes up read-write
+0 0 0 0
+Verify that setting partition 2 read-only works
+0 0 1 0
+Verify that setting whole disk read-only works
+1 1 1 1
+Verify that device revalidate works for whole disk policy
+1 1 1 1
+Verify that setting whole disk device back to read-write works
+0 0 1 0
+Verify that device revalidate works for partition policy
+0 0 1 0
+Verify setting hardware device read-only
+1 1 1 1
+Verify setting hardware device read-write
+0 0 1 0
+Verify that partition read-only policy is lost after BLKRRPART
+0 0 0 0
+Verify that whole disk read-only policy persists after BLKRRPART
+1 1 1 1
+Test complete
We have had several regressions wrt. read-only device handling. This is mainly caused by the fact that the device ro state can be set both by the user as well as the device. Add a series of tests that verify that all the intersections of user policy vs. device state changes are handled correctly in the block layer. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> --- v2: Hadn't verified the non-sdebug-wp parameter case after I changed output format. Fixed. --- tests/block/022 | 92 +++++++++++++++++++++++++++++++++++++++++++++ tests/block/022.out | 22 +++++++++++ 2 files changed, 114 insertions(+) create mode 100755 tests/block/022 create mode 100644 tests/block/022.out