@@ -306,7 +306,6 @@ static bool initialized;
/* reverse mapping from unit and fdc to drive */
#define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
-#define DRS (&drive_state[current_drive])
#define DRWE (&write_errors[current_drive])
#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
@@ -827,7 +826,7 @@ static void twaddle(void)
return;
fd_outb(fdc_state[fdc].dor & ~(0x10 << UNIT(current_drive)), FD_DOR);
fd_outb(fdc_state[fdc].dor, FD_DOR);
- DRS->select_date = jiffies;
+ drive_state[current_drive].select_date = jiffies;
}
/*
@@ -1427,11 +1426,13 @@ static int interpret_errors(void)
bad = 1;
if (ST1 & ST1_WP) {
DPRINT("Drive is write protected\n");
- clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
+ clear_bit(FD_DISK_WRITABLE_BIT,
+ &drive_state[current_drive].flags);
cont->done(0);
bad = 2;
} else if (ST1 & ST1_ND) {
- set_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
+ set_bit(FD_NEED_TWADDLE_BIT,
+ &drive_state[current_drive].flags);
} else if (ST1 & ST1_OR) {
if (drive_params[current_drive].flags & FTD_MSG)
DPRINT("Over/Underrun - retrying\n");
@@ -1441,7 +1442,7 @@ static int interpret_errors(void)
}
if (ST2 & ST2_WC || ST2 & ST2_BC)
/* wrong cylinder => recal */
- DRS->track = NEED_2_RECAL;
+ drive_state[current_drive].track = NEED_2_RECAL;
return bad;
case 0x80: /* invalid command given */
DPRINT("Invalid FDC command given!\n");
@@ -1474,7 +1475,7 @@ static void setup_rw_floppy(void)
flags |= FD_RAW_INTR;
if ((flags & FD_RAW_SPIN) && !(flags & FD_RAW_NO_MOTOR)) {
- ready_date = DRS->spinup_date + drive_params[current_drive].spinup;
+ ready_date = drive_state[current_drive].spinup_date + drive_params[current_drive].spinup;
/* If spinup will take a long time, rerun scandrives
* again just before spinup completion. Beware that
* after scandrives, we must again wait for selection.
@@ -1525,27 +1526,28 @@ static void seek_interrupt(void)
debugt(__func__, "");
if (inr != 2 || (ST0 & 0xF8) != 0x20) {
DPRINT("seek failed\n");
- DRS->track = NEED_2_RECAL;
+ drive_state[current_drive].track = NEED_2_RECAL;
cont->error();
cont->redo();
return;
}
- if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
+ if (drive_state[current_drive].track >= 0 && drive_state[current_drive].track != ST1 && !blind_seek) {
debug_dcl(drive_params[current_drive].flags,
"clearing NEWCHANGE flag because of effective seek\n");
debug_dcl(drive_params[current_drive].flags, "jiffies=%lu\n",
jiffies);
- clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+ clear_bit(FD_DISK_NEWCHANGE_BIT,
+ &drive_state[current_drive].flags);
/* effective seek */
- DRS->select_date = jiffies;
+ drive_state[current_drive].select_date = jiffies;
}
- DRS->track = ST1;
+ drive_state[current_drive].track = ST1;
floppy_ready();
}
static void check_wp(void)
{
- if (test_bit(FD_VERIFY_BIT, &DRS->flags)) {
+ if (test_bit(FD_VERIFY_BIT, &drive_state[current_drive].flags)) {
/* check write protection */
output_byte(FD_GETSTATUS);
output_byte(UNIT(current_drive));
@@ -1553,16 +1555,19 @@ static void check_wp(void)
fdc_state[fdc].reset = 1;
return;
}
- clear_bit(FD_VERIFY_BIT, &DRS->flags);
- clear_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
+ clear_bit(FD_VERIFY_BIT, &drive_state[current_drive].flags);
+ clear_bit(FD_NEED_TWADDLE_BIT,
+ &drive_state[current_drive].flags);
debug_dcl(drive_params[current_drive].flags,
"checking whether disk is write protected\n");
debug_dcl(drive_params[current_drive].flags, "wp=%x\n",
ST3 & 0x40);
if (!(ST3 & 0x40))
- set_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
+ set_bit(FD_DISK_WRITABLE_BIT,
+ &drive_state[current_drive].flags);
else
- clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
+ clear_bit(FD_DISK_WRITABLE_BIT,
+ &drive_state[current_drive].flags);
}
}
@@ -1575,23 +1580,24 @@ static void seek_floppy(void)
debug_dcl(drive_params[current_drive].flags,
"calling disk change from %s\n", __func__);
- if (!test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
+ if (!test_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags) &&
disk_change(current_drive) && (raw_cmd->flags & FD_RAW_NEED_DISK)) {
/* the media changed flag should be cleared after the seek.
* If it isn't, this means that there is really no disk in
* the drive.
*/
- set_bit(FD_DISK_CHANGED_BIT, &DRS->flags);
+ set_bit(FD_DISK_CHANGED_BIT,
+ &drive_state[current_drive].flags);
cont->done(0);
cont->redo();
return;
}
- if (DRS->track <= NEED_1_RECAL) {
+ if (drive_state[current_drive].track <= NEED_1_RECAL) {
recalibrate_floppy();
return;
- } else if (test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
+ } else if (test_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags) &&
(raw_cmd->flags & FD_RAW_NEED_DISK) &&
- (DRS->track <= NO_TRACK || DRS->track == raw_cmd->track)) {
+ (drive_state[current_drive].track <= NO_TRACK || drive_state[current_drive].track == raw_cmd->track)) {
/* we seek to clear the media-changed condition. Does anybody
* know a more elegant way, which works on all drives? */
if (raw_cmd->track)
@@ -1606,7 +1612,7 @@ static void seek_floppy(void)
}
} else {
check_wp();
- if (raw_cmd->track != DRS->track &&
+ if (raw_cmd->track != drive_state[current_drive].track &&
(raw_cmd->flags & FD_RAW_NEED_SEEK))
track = raw_cmd->track;
else {
@@ -1631,7 +1637,7 @@ static void recal_interrupt(void)
if (inr != 2)
fdc_state[fdc].reset = 1;
else if (ST0 & ST0_ECE) {
- switch (DRS->track) {
+ switch (drive_state[current_drive].track) {
case NEED_1_RECAL:
debugt(__func__, "need 1 recal");
/* after a second recalibrate, we still haven't
@@ -1652,8 +1658,9 @@ static void recal_interrupt(void)
debug_dcl(drive_params[current_drive].flags,
"clearing NEWCHANGE flag because of second recalibrate\n");
- clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
- DRS->select_date = jiffies;
+ clear_bit(FD_DISK_NEWCHANGE_BIT,
+ &drive_state[current_drive].flags);
+ drive_state[current_drive].select_date = jiffies;
/* fall through */
default:
debugt(__func__, "default");
@@ -1663,11 +1670,11 @@ static void recal_interrupt(void)
* track 0, this might mean that we
* started beyond track 80. Try
* again. */
- DRS->track = NEED_1_RECAL;
+ drive_state[current_drive].track = NEED_1_RECAL;
break;
}
} else
- DRS->track = ST1;
+ drive_state[current_drive].track = ST1;
floppy_ready();
}
@@ -1877,9 +1884,9 @@ static int start_motor(void (*function)(void))
if (!(fdc_state[fdc].dor & (0x10 << UNIT(current_drive)))) {
set_debugt();
/* no read since this drive is running */
- DRS->first_read_date = 0;
+ drive_state[current_drive].first_read_date = 0;
/* note motor start time if motor is not yet running */
- DRS->spinup_date = jiffies;
+ drive_state[current_drive].spinup_date = jiffies;
data |= (0x10 << UNIT(current_drive));
}
} else if (fdc_state[fdc].dor & (0x10 << UNIT(current_drive)))
@@ -1890,7 +1897,7 @@ static int start_motor(void (*function)(void))
set_dor(fdc, mask, data);
/* wait_for_completion also schedules reset if needed. */
- return fd_wait_for_completion(DRS->select_date + drive_params[current_drive].select_delay,
+ return fd_wait_for_completion(drive_state[current_drive].select_date + drive_params[current_drive].select_delay,
function);
}
@@ -1939,7 +1946,7 @@ static void floppy_start(void)
scandrives();
debug_dcl(drive_params[current_drive].flags,
"setting NEWCHANGE in floppy_start\n");
- set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+ set_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags);
floppy_ready();
}
@@ -2038,14 +2045,14 @@ static int next_valid_format(void)
{
int probed_format;
- probed_format = DRS->probed_format;
+ probed_format = drive_state[current_drive].probed_format;
while (1) {
if (probed_format >= 8 || !drive_params[current_drive].autodetect[probed_format]) {
- DRS->probed_format = 0;
+ drive_state[current_drive].probed_format = 0;
return 1;
}
if (floppy_type[drive_params[current_drive].autodetect[probed_format]].sect) {
- DRS->probed_format = probed_format;
+ drive_state[current_drive].probed_format = probed_format;
return 0;
}
probed_format++;
@@ -2057,7 +2064,7 @@ static void bad_flp_intr(void)
int err_count;
if (probing) {
- DRS->probed_format++;
+ drive_state[current_drive].probed_format++;
if (!next_valid_format())
return;
}
@@ -2068,7 +2075,7 @@ static void bad_flp_intr(void)
if (err_count > drive_params[current_drive].max_errors.reset)
fdc_state[fdc].reset = 1;
else if (err_count > drive_params[current_drive].max_errors.recal)
- DRS->track = NEED_2_RECAL;
+ drive_state[current_drive].track = NEED_2_RECAL;
}
static void set_floppy(int drive)
@@ -2259,9 +2266,9 @@ static void request_done(int uptodate)
/* maintain values for invalidation on geometry
* change */
block = current_count_sectors + blk_rq_pos(req);
- INFBOUND(DRS->maxblock, block);
+ INFBOUND(drive_state[current_drive].maxblock, block);
if (block > _floppy->sect)
- DRS->maxtrack = 1;
+ drive_state[current_drive].maxtrack = 1;
floppy_end_request(req, 0);
} else {
@@ -2270,10 +2277,10 @@ static void request_done(int uptodate)
DRWE->write_errors++;
if (DRWE->write_errors == 1) {
DRWE->first_error_sector = blk_rq_pos(req);
- DRWE->first_error_generation = DRS->generation;
+ DRWE->first_error_generation = drive_state[current_drive].generation;
}
DRWE->last_error_sector = blk_rq_pos(req);
- DRWE->last_error_generation = DRS->generation;
+ DRWE->last_error_generation = drive_state[current_drive].generation;
}
floppy_end_request(req, BLK_STS_IOERR);
}
@@ -2294,8 +2301,8 @@ static void rw_interrupt(void)
return;
}
- if (!DRS->first_read_date)
- DRS->first_read_date = jiffies;
+ if (!drive_state[current_drive].first_read_date)
+ drive_state[current_drive].first_read_date = jiffies;
nr_sectors = 0;
ssize = DIV_ROUND_UP(1 << SIZECODE, 4);
@@ -2568,7 +2575,7 @@ static int make_raw_rw_request(void)
HEAD = fsector_t / _floppy->sect;
if (((_floppy->stretch & (FD_SWAPSIDES | FD_SECTBASEMASK)) ||
- test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags)) &&
+ test_bit(FD_NEED_TWADDLE_BIT, &drive_state[current_drive].flags)) &&
fsector_t < _floppy->sect)
max_sector = _floppy->sect;
@@ -2685,7 +2692,7 @@ static int make_raw_rw_request(void)
(indirect * 2 > direct * 3 &&
*errors < drive_params[current_drive].max_errors.read_track &&
((!probing ||
- (drive_params[current_drive].read_track & (1 << DRS->probed_format)))))) {
+ (drive_params[current_drive].read_track & (1 << drive_state[current_drive].probed_format)))))) {
max_size = blk_rq_sectors(current_req);
} else {
raw_cmd->kernel_data = bio_data(current_req->bio);
@@ -2847,14 +2854,14 @@ static void redo_fd_request(void)
disk_change(current_drive);
if (test_bit(current_drive, &fake_change) ||
- test_bit(FD_DISK_CHANGED_BIT, &DRS->flags)) {
+ test_bit(FD_DISK_CHANGED_BIT, &drive_state[current_drive].flags)) {
DPRINT("disk absent or changed during operation\n");
request_done(0);
goto do_request;
}
if (!_floppy) { /* Autodetection */
if (!probing) {
- DRS->probed_format = 0;
+ drive_state[current_drive].probed_format = 0;
if (next_valid_format()) {
DPRINT("no autodetectable formats\n");
_floppy = NULL;
@@ -2863,7 +2870,7 @@ static void redo_fd_request(void)
}
}
probing = 1;
- _floppy = floppy_type + drive_params[current_drive].autodetect[DRS->probed_format];
+ _floppy = floppy_type + drive_params[current_drive].autodetect[drive_state[current_drive].probed_format];
} else
probing = 0;
errors = &(current_req->error_count);
@@ -2873,7 +2880,7 @@ static void redo_fd_request(void)
goto do_request;
}
- if (test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags))
+ if (test_bit(FD_NEED_TWADDLE_BIT, &drive_state[current_drive].flags))
twaddle();
schedule_bh(floppy_start);
debugt(__func__, "queue fd request");
@@ -2944,7 +2951,7 @@ static int poll_drive(bool interruptible, int flag)
cont = &poll_cont;
debug_dcl(drive_params[current_drive].flags,
"setting NEWCHANGE in poll_drive\n");
- set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+ set_bit(FD_DISK_NEWCHANGE_BIT, &drive_state[current_drive].flags);
return wait_til_done(floppy_ready, interruptible);
}
@@ -3220,7 +3227,7 @@ static int raw_cmd_ioctl(int cmd, void __user *param)
if (ret != -EINTR && fdc_state[fdc].reset)
ret = -EIO;
- DRS->track = NO_TRACK;
+ drive_state[current_drive].track = NO_TRACK;
ret2 = raw_cmd_copyout(cmd, param, my_raw_cmd);
if (!ret)
@@ -3293,16 +3300,16 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g,
current_type[drive] = &user_params[drive];
floppy_sizes[drive] = user_params[drive].size;
if (cmd == FDDEFPRM)
- DRS->keep_data = -1;
+ drive_state[current_drive].keep_data = -1;
else
- DRS->keep_data = 1;
+ drive_state[current_drive].keep_data = 1;
/* invalidation. Invalidate only when needed, i.e.
* when there are already sectors in the buffer cache
* whose number will change. This is useful, because
* mtools often changes the geometry of the disk after
* looking at the boot block */
- if (DRS->maxblock > user_params[drive].sect ||
- DRS->maxtrack ||
+ if (drive_state[current_drive].maxblock > user_params[drive].sect ||
+ drive_state[current_drive].maxtrack ||
((user_params[drive].sect ^ oldStretch) &
(FD_SWAPSIDES | FD_SECTBASEMASK)))
invalidate_drive(bdev);
This macro doesn't bring much value and only slightly obfuscates the code by silently using global variable "current_drive", let's expand it. Signed-off-by: Willy Tarreau <w@1wt.eu> --- drivers/block/floppy.c | 115 ++++++++++++++++++++++++++----------------------- 1 file changed, 61 insertions(+), 54 deletions(-)