@@ -1128,26 +1128,26 @@ static int wait_til_ready(int fdc)
}
/* sends a command byte to the fdc */
-static int output_byte(char byte)
+static int output_byte(int fdc, char byte)
{
- int status = wait_til_ready(current_fdc);
+ int status = wait_til_ready(fdc);
if (status < 0)
return -1;
if (is_ready_state(status)) {
- fdc_outb(byte, current_fdc, FD_DATA);
+ fdc_outb(byte, fdc, FD_DATA);
output_log[output_log_pos].data = byte;
output_log[output_log_pos].status = status;
output_log[output_log_pos].jiffies = jiffies;
output_log_pos = (output_log_pos + 1) % OLOGSIZE;
return 0;
}
- fdc_state[current_fdc].reset = 1;
+ fdc_state[fdc].reset = 1;
if (initialized) {
DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n",
- byte, current_fdc, status);
- show_floppy(current_fdc);
+ byte, fdc, status);
+ show_floppy(fdc);
}
return -1;
}
@@ -1229,8 +1229,8 @@ static void perpendicular_mode(void)
if (fdc_state[current_fdc].perp_mode == perp_mode)
return;
if (fdc_state[current_fdc].version >= FDC_82077_ORIG) {
- output_byte(FD_PERPENDICULAR);
- output_byte(perp_mode);
+ output_byte(current_fdc, FD_PERPENDICULAR);
+ output_byte(current_fdc, perp_mode);
fdc_state[current_fdc].perp_mode = perp_mode;
} else if (perp_mode) {
DPRINT("perpendicular mode not supported by this FDC.\n");
@@ -1243,12 +1243,12 @@ static int no_fifo;
static int fdc_configure(void)
{
/* Turn on FIFO */
- output_byte(FD_CONFIGURE);
+ output_byte(current_fdc, FD_CONFIGURE);
if (need_more_output() != MORE_OUTPUT)
return 0;
- output_byte(0);
- output_byte(0x10 | (no_fifo & 0x20) | (fifo_depth & 0xf));
- output_byte(0); /* pre-compensation from track
+ output_byte(current_fdc, 0);
+ output_byte(current_fdc, 0x10 | (no_fifo & 0x20) | (fifo_depth & 0xf));
+ output_byte(current_fdc, 0); /* pre-compensation from track
0 upwards */
return 1;
}
@@ -1301,10 +1301,10 @@ static void fdc_specify(void)
if (fdc_state[current_fdc].version >= FDC_82078) {
/* chose the default rate table, not the one
* where 1 = 2 Mbps */
- output_byte(FD_DRIVESPEC);
+ output_byte(current_fdc, FD_DRIVESPEC);
if (need_more_output() == MORE_OUTPUT) {
- output_byte(UNIT(current_drive));
- output_byte(0xc0);
+ output_byte(current_fdc, UNIT(current_drive));
+ output_byte(current_fdc, 0xc0);
}
}
break;
@@ -1349,9 +1349,9 @@ static void fdc_specify(void)
if (fdc_state[current_fdc].spec1 != spec1 ||
fdc_state[current_fdc].spec2 != spec2) {
/* Go ahead and set spec1 and spec2 */
- output_byte(FD_SPECIFY);
- output_byte(fdc_state[current_fdc].spec1 = spec1);
- output_byte(fdc_state[current_fdc].spec2 = spec2);
+ output_byte(current_fdc, FD_SPECIFY);
+ output_byte(current_fdc, fdc_state[current_fdc].spec1 = spec1);
+ output_byte(current_fdc, fdc_state[current_fdc].spec2 = spec2);
}
} /* fdc_specify */
@@ -1513,7 +1513,7 @@ static void setup_rw_floppy(void)
r = 0;
for (i = 0; i < raw_cmd->cmd_count; i++)
- r |= output_byte(raw_cmd->cmd[i]);
+ r |= output_byte(current_fdc, raw_cmd->cmd[i]);
debugt(__func__, "rw_command");
@@ -1566,8 +1566,8 @@ static void check_wp(void)
{
if (test_bit(FD_VERIFY_BIT, &drive_state[current_drive].flags)) {
/* check write protection */
- output_byte(FD_GETSTATUS);
- output_byte(UNIT(current_drive));
+ output_byte(current_fdc, FD_GETSTATUS);
+ output_byte(current_fdc, UNIT(current_drive));
if (result() != 1) {
fdc_state[current_fdc].reset = 1;
return;
@@ -1639,9 +1639,9 @@ static void seek_floppy(void)
}
do_floppy = seek_interrupt;
- output_byte(FD_SEEK);
- output_byte(UNIT(current_drive));
- if (output_byte(track) < 0) {
+ output_byte(current_fdc, FD_SEEK);
+ output_byte(current_fdc, UNIT(current_drive));
+ if (output_byte(current_fdc, track) < 0) {
reset_fdc();
return;
}
@@ -1748,7 +1748,7 @@ irqreturn_t floppy_interrupt(int irq, void *dev_id)
if (inr == 0) {
int max_sensei = 4;
do {
- output_byte(FD_SENSEI);
+ output_byte(current_fdc, FD_SENSEI);
inr = result();
if (do_print)
print_result("sensei", inr);
@@ -1771,8 +1771,8 @@ static void recalibrate_floppy(void)
{
debugt(__func__, "");
do_floppy = recal_interrupt;
- output_byte(FD_RECALIBRATE);
- if (output_byte(UNIT(current_drive)) < 0)
+ output_byte(current_fdc, FD_RECALIBRATE);
+ if (output_byte(current_fdc, UNIT(current_drive)) < 0)
reset_fdc();
}
@@ -4302,7 +4302,7 @@ static char __init get_fdc_version(void)
{
int r;
- output_byte(FD_DUMPREGS); /* 82072 and better know DUMPREGS */
+ output_byte(current_fdc, FD_DUMPREGS); /* 82072 and better know DUMPREGS */
if (fdc_state[current_fdc].reset)
return FDC_NONE;
r = result();
@@ -4323,15 +4323,15 @@ static char __init get_fdc_version(void)
return FDC_82072; /* 82072 doesn't know CONFIGURE */
}
- output_byte(FD_PERPENDICULAR);
+ output_byte(current_fdc, FD_PERPENDICULAR);
if (need_more_output() == MORE_OUTPUT) {
- output_byte(0);
+ output_byte(current_fdc, 0);
} else {
pr_info("FDC %d is an 82072A\n", current_fdc);
return FDC_82072A; /* 82072A as found on Sparcs. */
}
- output_byte(FD_UNLOCK);
+ output_byte(current_fdc, FD_UNLOCK);
r = result();
if ((r == 1) && (reply_buffer[0] == 0x80)) {
pr_info("FDC %d is a pre-1991 82077\n", current_fdc);
@@ -4343,7 +4343,7 @@ static char __init get_fdc_version(void)
current_fdc, r);
return FDC_UNKNOWN;
}
- output_byte(FD_PARTID);
+ output_byte(current_fdc, FD_PARTID);
r = result();
if (r != 1) {
pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
Now the fdc is passed in argument so that the function does not use current_fdc anymore. Signed-off-by: Willy Tarreau <w@1wt.eu> --- drivers/block/floppy.c | 64 +++++++++++++++++++++--------------------- 1 file changed, 32 insertions(+), 32 deletions(-)